[Mon Jul  9 08:44:16 2012] Detection parameters:
  Position = (276.7, 248.2) = 17 46 21.09 -28 43 43.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 42605.4 +/- 247.2
  Background counts = 76.6
  Rate = 2 +/- 0.01

[Mon Jul  9 08:44:16 2012] Off-axis axis estimate = 3.97'
[Mon Jul  9 11:58:52 2012] Using EEF radius (= 8.41 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 11:58:52 2012] Initial guess for spatial extent in simple fitting = 8.41"
[Mon Jul  9 11:58:52 2012] source mask rpix=1.9, npix_max = 23, mask sum = 25, frac = 1.055
[Mon Jul  9 11:58:52 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.41"
[Mon Jul  9 13:11:41 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src1.ximg exists
[Mon Jul  9 13:11:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 13:11:41 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src1_1.ximg exists
[Mon Jul  9 13:11:41 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src1.csv
[Mon Jul  9 13:11:41 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Mon Jul  9 13:11:43 2012] Fit fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Mon Jul  9 13:12:12 2012] Spatial fit model total counts = 40267.400000, observed total counts = 39860.000000
[Mon Jul  9 13:12:12 2012] Offset between fit and detection position for source 3 = 0.234206 pixels
[Mon Jul  9 13:12:12 2012] 40446.800000 total counts/ 11409.500000 bgd. counts: snr = 271.845986
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.234206 pixels
  Position = (276.7, 248.4) = 17 46 21.09 -28 43 43.5
  Extent = 6.9 (6.8-6.9)", rotation angle = 0
  Source counts = 29037.3 +/- 201.1
  Background counts = 11409.5
  Rate = 1 +/- 0.008
[Mon Jul  9 13:12:12 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 13:12:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 13:12:12 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 13:12:12 2012] Source does appear to be extended
[Mon Jul  9 13:12:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 17:49:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jul  9 17:49:36 2012] Initial guess for spatial extent in simple fitting = 6.85"
[Mon Jul  9 17:49:36 2012] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.929
[Mon Jul  9 17:49:36 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 6.85"
[Mon Jul  9 18:41:15 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src1.ximg exists
[Mon Jul  9 18:41:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 18:41:15 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src1_1.ximg exists
[Mon Jul  9 18:41:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src1.csv
[Mon Jul  9 18:41:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 18:41:15 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Mon Jul  9 18:41:15 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Mon Jul  9 18:41:15 2012] Fit fullrun_mos2_xmm0112970401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Mon Jul  9 18:41:27 2012] Spatial fit model total counts = 40399.900000, observed total counts = 39969.000000
[Mon Jul  9 18:41:27 2012] Offset between fit and detection position for source 3 = 0.024182 pixels
[Mon Jul  9 18:41:27 2012] 40380.400000 total counts/ 11124.700000 bgd. counts: snr = 277.374377
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.024182 pixels
  Position = (276.7, 248.4) = 17 46 21.08 -28 43 43.5
  Extent = 6.9 (6.8-7.0)", rotation angle = 0
  Source counts = 29255.7 +/- 200.9
  Background counts = 11124.7
  Rate = 1 +/- 0.008
[Mon Jul  9 18:41:27 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 18:41:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 18:41:27 2012] Assessing source extent using major axis lower bound
[Mon Jul  9 18:41:27 2012] Source does appear to be extended
[Mon Jul  9 18:41:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 19:51:40 2012] Counts = 29255.700000, rescaling region sizes by 3.000000
[Mon Jul  9 19:51:40 2012] XMMSAS src. selection expression = ellipse(24028.105600, 21564.068200, 1243.830636, 1243.830636, 0.000000, X, Y)
[Mon Jul  9 19:51:40 2012] Writing source region out to fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src3_src.reg
[Mon Jul  9 19:51:40 2012] Extracting stamp from image fullrun_mos2_xmm0112970401_pi300-10000_cl_sm2.00.img.gz, (205, 177) - (348, 320)
[Mon Jul  9 19:51:40 2012] XMMSAS bgd. selection expression = annulus(24028.105600, 21564.068200, 6219.153179, 12438.306358, X, Y) && !ellipse(32104.725000, 14856.843600, 523.677047, 523.677047, 0.000000, X, Y) && !ellipse(24038.249695, 20323.181366, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23601.547821, 11184.367416, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24925.560486, 20283.475403, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23736.784393, 10408.403908, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23506.274750, 20267.500092, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28760.434357, 21370.435104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25898.920776, 21293.991501, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24995.398000, 22252.084000, 1242.208036, 1242.208036, 0.000000, X, Y) && !ellipse(24664.384000, 10533.752600, 2053.768059, 2053.768059, 0.000000, X, Y)
[Mon Jul  9 19:51:40 2012] Writing fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src3.gif
[Mon Jul  9 19:51:47 2012] Mean detx,y = (3279.22, -5862.63) 
[Mon Jul  9 19:51:49 2012] Setting backscal keywords in source and bgd. spectrum
[Mon Jul  9 19:55:31 2012] Binned source spectrum to 10 counts/bin
[Mon Jul  9 19:55:31 2012] Setting source spectrum file to fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul  9 19:55:31 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Mon Jul  9 20:18:30 2012] Updating aperture counts using extracted products
[Mon Jul  9 20:18:30 2012] Error reading totcts from fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Mon Jul  9 20:18:30 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 20:18:30 2012] Using photon index=1.80, rate=1.12, arf fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src3.arf
[Mon Jul  9 20:18:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 20:18:30 2012] Updating source flux to 1.4e-11
[Mon Jul  9 20:20:25 2012] Reading fit data from xmm0112970401/analysis//spectral/fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src3_pl.csv
[Mon Jul  9 20:20:25 2012] Spectral fit parameter nH value = 2.16242e+23
[Mon Jul  9 20:20:25 2012] Spectral fit parameter PhoIndex value = 1.91872
[Mon Jul  9 20:20:25 2012] Failed to get F(0.3-8.0) from xmm0112970401/analysis//spectral/fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src3_pl.csv, possibly due to different flux energy range selected
[Mon Jul  9 20:20:25 2012] Calculating source flux in energy range 0.30-8.00
[Mon Jul  9 20:20:25 2012] Using Nh = 2.2e+23, photon index=1.92, rate=1.12, arf fullrun_mos2_xmm0112970401_pi300-10000_pass1_cl_src3.arf
[Mon Jul  9 20:20:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Mon Jul  9 20:20:25 2012] Updating source flux to 5.2e-11