[Mon Jul  9 08:44:16 2012] Detection parameters:
  Position = (264.9, 123.0) = 17 46 25.03 -28 52 50.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.7 +/- 14.4
  Background counts = 33.0
  Rate = 0.002 +/- 0.0005

[Mon Jul  9 08:44:16 2012] Off-axis axis estimate = 12.95'
[Mon Jul  9 11:58:52 2012] Using EEF radius (= 12.91 ")to estimate initial spatial extent for simple fitting
[Mon Jul  9 11:58:52 2012] Initial guess for spatial extent in simple fitting = 12.91"
[Mon Jul  9 11:58:52 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.019
[Mon Jul  9 11:58:52 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 12.91"
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src18.ximg exists
[Mon Jul  9 13:11:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src18.csv
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src18_1.ximg exists
[Mon Jul  9 13:11:43 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src18.csv
[Mon Jul  9 13:11:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Mon Jul  9 13:11:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jul  9 13:11:43 2012] fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Mon Jul  9 13:11:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src18.csv
[Mon Jul  9 13:11:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112970401_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jul  9 13:12:12 2012] Warning, spatial fit 18 centroid is now closest to src. 24
[Mon Jul  9 13:12:12 2012] Source 20 is offset by -3.039399 and 1.862855 pixels which is larger than
2 X fitted extent = 1.488887 x 1.488887, not incorporating fit results
[Mon Jul  9 13:12:12 2012] Vigneting correction estimate = 1.000000
[Mon Jul  9 13:12:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jul  9 13:12:12 2012] Assessing source extent using major
[Mon Jul  9 13:12:12 2012] Source does appear to be extended
[Mon Jul  9 13:12:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jul  9 13:12:12 2012] Deleting source due to low Poisson probability 0.9