[Fri May 25 01:20:28 2012] Detection parameters:
  Position = (311.7, 326.7) = 17 47 20.73 -28 8 25.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.9 +/- 10.1
  Background counts = 10.6
  Rate = 0.003 +/- 0.0006

[Fri May 25 01:20:28 2012] Off-axis axis estimate = 2.27'
[Fri May 25 01:43:56 2012] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Fri May 25 01:43:56 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Fri May 25 01:43:56 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.998
[Fri May 25 01:43:56 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 7.56"
[Fri May 25 02:00:49 2012] fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_src10.ximg exists
[Fri May 25 02:00:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_src10.csv
[Fri May 25 02:00:49 2012] fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_src10_1.ximg exists
[Fri May 25 02:00:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_src10.csv
[Fri May 25 02:00:49 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 02:00:50 2012] fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Fri May 25 02:00:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 25 02:00:50 2012] fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Fri May 25 02:00:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_tfrozen_src10.csv
[Fri May 25 02:00:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112970201_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 25 02:16:33 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 11.839916 pixels away
[Fri May 25 02:16:33 2012] Vigneting correction estimate = 1.000000
[Fri May 25 02:16:33 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 02:16:33 2012] Assessing source extent using major
[Fri May 25 02:16:33 2012] Source does appear to be extended
[Fri May 25 02:16:33 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 02:42:11 2012] Using EEF radius (= 7.56 ")to estimate initial spatial extent for simple fitting
[Fri May 25 02:42:11 2012] Initial guess for spatial extent in simple fitting = 7.56"
[Fri May 25 02:42:11 2012] source mask rpix=1.7, npix_max = 20, mask sum = 20, frac = 0.998
[Fri May 25 02:42:11 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.56"
[Fri May 25 02:57:40 2012] fullrun_mos1_xmm0112970201_pi300-10000_cl_pass1_src10.ximg exists
[Fri May 25 02:57:40 2012] fullrun_mos1_xmm0112970201_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri May 25 02:57:40 2012] Fit fullrun_mos1_xmm0112970201_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri May 25 02:57:40 2012] fullrun_mos1_xmm0112970201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri May 25 02:57:40 2012] fullrun_mos1_xmm0112970201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri May 25 02:57:40 2012] Fit fullrun_mos1_xmm0112970201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Fri May 25 03:14:15 2012] Source 13 is offset by -2.174938 and -0.139355 pixels which is larger than
2 X fitted extent = 1.110469 x 1.110469, not incorporating fit results
[Fri May 25 03:14:15 2012] Source 13 is offset by 4.424786 and 6.697887 pixels which is larger than
2 X fitted extent = 4.683448 x 2.845030, not incorporating fit results
[Fri May 25 03:14:15 2012] Vigneting correction estimate = 1.000000
[Fri May 25 03:14:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 25 03:14:15 2012] Assessing source extent using major
[Fri May 25 03:14:15 2012] Source does appear to be extended
[Fri May 25 03:14:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 25 03:34:42 2012] XMMSAS src. selection expression = ellipse(27070.168365, 28378.264130, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 25 03:34:42 2012] Writing source region out to fullrun_mos1_xmm0112970201_pi300-10000_pass1_cl_src13_src.reg
[Fri May 25 03:34:42 2012] Extracting stamp from image fullrun_mos1_xmm0112970201_pi300-10000_cl_sm2.00.img.gz, (274, 289) - (349, 364)
[Fri May 25 03:34:42 2012] XMMSAS bgd. selection expression = annulus(27070.168365, 28378.264130, 1087.500000, 2175.000000, X, Y) && !ellipse(26534.670800, 27548.312000, 966.200028, 579.575217, 325.178200, X, Y) && !ellipse(27872.645400, 25950.879800, 262.589389, 262.589389, 0.000000, X, Y)
[Fri May 25 03:34:42 2012] Writing fullrun_mos1_xmm0112970201_pi300-10000_pass1_cl_src13.gif
[Fri May 25 03:36:52 2012] Mean detx,y = (894.00, -125.04) 
[Fri May 25 03:36:53 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 25 03:37:01 2012] Binned source spectrum to 10 counts/bin
[Fri May 25 03:37:01 2012] Setting source spectrum file to fullrun_mos1_xmm0112970201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 25 03:37:01 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112970201_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri May 25 03:46:14 2012] Not generating rmf since there are only 45 counts
[Fri May 25 03:46:14 2012] rmf not generated due to insufficient counts
[Fri May 25 04:03:20 2012] Updating aperture counts using extracted products
[Fri May 25 04:03:20 2012] Error reading totcts from fullrun_mos1_xmm0112970201_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May 25 04:03:21 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 25 04:03:21 2012] Using photon index=1.80, rate=0.00269, arf fullrun_mos1_xmm0112970201_pi300-10000_pass1_cl_src13.arf
[Fri May 25 04:03:21 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 25 04:03:21 2012] Updating source flux to 2.7e-14
[Fri May 25 04:03:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting