[Fri Jun 22 20:03:50 2012] Detection parameters:
  Position = (314.7, 315.2) = 20 19 18.14 11 27 14.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 107.0 +/- 15.6
  Background counts = 42.3
  Rate = 0.009 +/- 0.001

[Fri Jun 22 20:03:50 2012] Off-axis axis estimate = 1.69'
[Fri Jun 22 20:05:35 2012] Using EEF radius (= 7.27 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 20:05:35 2012] Initial guess for spatial extent in simple fitting = 7.27"
[Fri Jun 22 20:05:35 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.848
[Fri Jun 22 20:05:35 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 7.27"
[Fri Jun 22 20:24:08 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src9.ximg exists
[Fri Jun 22 20:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src9.csv
[Fri Jun 22 20:24:08 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Jun 22 20:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src9.csv
[Fri Jun 22 20:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 20:24:08 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Jun 22 20:24:08 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Jun 22 20:24:08 2012] Fit fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Jun 22 20:49:38 2012] Spatial fit model total counts = 268.952000, observed total counts = 279.000000
[Fri Jun 22 20:49:38 2012] Offset between fit and detection position for source 9 = 0.249437 pixels
[Fri Jun 22 20:49:38 2012] 270.311300 total counts/ 217.751000 bgd. counts: snr = 3.561867
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 0.249437 pixels
  Position = (315.0, 315.2) = 20 19 18.07 11 27 13.4
  Extent = 4.9 (3.8-6.1)", rotation angle = 0
  Source counts = 52.6 +/- 16.4
  Background counts = 217.8
  Rate = 0.006 +/- 0.002
[Fri Jun 22 20:49:38 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 20:49:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 20:49:38 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 20:49:38 2012] Source does appear to be extended
[Fri Jun 22 20:49:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 20:49:47 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Jun 22 20:49:47 2012] Initial guess for spatial extent in simple fitting = 4.89"
[Fri Jun 22 20:49:47 2012] source mask rpix=1.1, npix_max = 10, mask sum = 12, frac = 1.137
[Fri Jun 22 20:49:47 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 4.89"
[Fri Jun 22 21:06:59 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_src9.ximg exists
[Fri Jun 22 21:06:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_src9.csv
[Fri Jun 22 21:06:59 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_src9_1.ximg exists
[Fri Jun 22 21:06:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_src9.csv
[Fri Jun 22 21:06:59 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 21:06:59 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Fri Jun 22 21:06:59 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Fri Jun 22 21:06:59 2012] Fit fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Fri Jun 22 21:32:27 2012] Warning, spatial fit 9 centroid is now closest to src. 12
[Fri Jun 22 21:32:27 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 21:32:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 21:32:27 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 21:32:27 2012] Source does appear to be extended
[Fri Jun 22 21:32:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 21:32:36 2012] XMMSAS src. selection expression = ellipse(27352.683200, 27371.931600, 293.400008, 293.400008, 0.000000, X, Y)
[Fri Jun 22 21:32:36 2012] Writing source region out to fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src9_src.reg
[Fri Jun 22 21:32:36 2012] Extracting stamp from image fullrun_pn_xmm0112960601_pi300-10000_cl_sm2.00.img.gz, (298, 298) - (332, 332)
[Fri Jun 22 21:32:36 2012] XMMSAS bgd. selection expression = annulus(27352.683200, 27371.931600, 489.000014, 978.000028, X, Y) && !ellipse(26777.012056, 26414.255372, 341.594465, 251.104317, 0.000000, X, Y)
[Fri Jun 22 21:32:36 2012] Writing fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src9.gif
[Fri Jun 22 21:36:45 2012] Mean detx,y = (66.74, -226.77) 
[Fri Jun 22 21:36:48 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 21:36:59 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 21:37:00 2012] Setting source spectrum file to fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 22 21:37:00 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Fri Jun 22 21:41:09 2012] Not generating rmf since there are only 52 counts
[Fri Jun 22 21:41:09 2012] rmf not generated due to insufficient counts
[Fri Jun 22 21:48:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 21:48:51 2012] Error reading totcts from fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Fri Jun 22 21:48:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 21:48:51 2012] Using photon index=1.80, rate=0.00561, arf fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src9.arf
[Fri Jun 22 21:48:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 21:48:51 2012] Updating source flux to 1.8e-14
[Fri Jun 22 21:48:54 2012] Source 9 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 22 21:48:55 2012] xmm0112960601/analysis//spectral/fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete