[Fri Jun 22 20:03:50 2012] Detection parameters:
  Position = (224.2, 366.9) = 20 19 44.92 11 30 57.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 46.1 +/- 11.5
  Background counts = 35.2
  Rate = 0.003 +/- 0.0008

[Fri Jun 22 20:03:50 2012] Off-axis axis estimate = 7.32'
[Fri Jun 22 20:05:35 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 20:05:35 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Fri Jun 22 20:05:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.132
[Fri Jun 22 20:05:35 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.09"
[Fri Jun 22 20:24:08 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jun 22 20:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src4.csv
[Fri Jun 22 20:24:08 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jun 22 20:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src4.csv
[Fri Jun 22 20:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 20:24:08 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jun 22 20:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 22 20:24:08 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jun 22 20:24:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jun 22 20:24:08 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 20:49:38 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 13.240828 pixels away
[Fri Jun 22 20:49:38 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 20:49:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 20:49:38 2012] Assessing source extent using major
[Fri Jun 22 20:49:38 2012] Source does appear to be extended
[Fri Jun 22 20:49:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 20:49:47 2012] Using EEF radius (= 10.09 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 20:49:47 2012] Initial guess for spatial extent in simple fitting = 10.09"
[Fri Jun 22 20:49:47 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.132
[Fri Jun 22 20:49:47 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 10.09"
[Fri Jun 22 21:06:59 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_src4.ximg exists
[Fri Jun 22 21:06:59 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_src4_1.ximg exists
[Fri Jun 22 21:06:59 2012] Fit fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_src4 appears to have run properly
[Fri Jun 22 21:06:59 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Fri Jun 22 21:06:59 2012] fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Fri Jun 22 21:06:59 2012] Fit fullrun_pn_xmm0112960601_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Fri Jun 22 21:32:27 2012] Spatial fit model total counts = 175.622000, observed total counts = 165.000000
[Fri Jun 22 21:32:27 2012] Offset between fit and detection position for source 4 = 0.851879 pixels
[Fri Jun 22 21:32:27 2012] 176.358500 total counts/ 154.500000 bgd. counts: snr = 1.758556
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.851879 pixels
  Position = (225.0, 367.3) = 20 19 44.69 11 31 0.1
  Extent = 5.7 (2.5-11.0)", rotation angle = 0
  Source counts = 21.9 +/- 13.3
  Background counts = 154.5
  Rate = 0.002 +/- 0.001
[Fri Jun 22 21:32:27 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 21:32:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 21:32:27 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 21:32:27 2012] Source does appear to be extended
[Fri Jun 22 21:32:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 21:32:36 2012] XMMSAS src. selection expression = ellipse(19526.268600, 31907.506400, 343.005010, 343.005010, 0.000000, X, Y)
[Fri Jun 22 21:32:36 2012] Writing source region out to fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src4_src.reg
[Fri Jun 22 21:32:36 2012] Extracting stamp from image fullrun_pn_xmm0112960601_pi300-10000_cl_sm2.00.img.gz, (205, 348) - (245, 387)
[Fri Jun 22 21:32:36 2012] XMMSAS bgd. selection expression = annulus(19526.268600, 31907.506400, 571.675016, 1143.350033, X, Y)
[Fri Jun 22 21:32:36 2012] Writing fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src4.gif
[Fri Jun 22 21:34:08 2012] Mean detx,y = (-8453.62, -3197.69) 
[Fri Jun 22 21:34:10 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 21:34:30 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 21:34:31 2012] Setting source spectrum file to fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 21:34:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Fri Jun 22 21:40:17 2012] Not generating rmf since there are only 21 counts
[Fri Jun 22 21:40:17 2012] rmf not generated due to insufficient counts
[Fri Jun 22 21:48:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 21:48:51 2012] Error reading totcts from fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Fri Jun 22 21:48:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 21:48:51 2012] Using photon index=1.80, rate=0.00233, arf fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src4.arf
[Fri Jun 22 21:48:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 21:48:51 2012] Updating source flux to 1.3e-14
[Fri Jun 22 21:48:54 2012] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 22 21:48:55 2012] xmm0112960601/analysis//spectral/fullrun_pn_xmm0112960601_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete