[Fri Jun 22 20:04:26 2012] Detection parameters:
  Position = (317.6, 323.7) = 20 19 17.28 11 27 51.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.1 +/- 10.8
  Background counts = 19.3
  Rate = 0.004 +/- 0.0007

[Fri Jun 22 20:04:26 2012] Off-axis axis estimate = 2.30'
[Fri Jun 22 20:37:29 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 20:37:29 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Fri Jun 22 20:37:29 2012] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.243
[Fri Jun 22 20:37:29 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 7.58"
[Fri Jun 22 20:49:34 2012] fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_src6.ximg exists
[Fri Jun 22 20:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_src6.csv
[Fri Jun 22 20:49:34 2012] fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Jun 22 20:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_src6.csv
[Fri Jun 22 20:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 20:49:34 2012] fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Jun 22 20:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun 22 20:49:34 2012] fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Jun 22 20:49:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src6.csv
[Fri Jun 22 20:49:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112960601_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jun 22 20:49:41 2012] Warning, spatial fit 6 centroid is now closest to src. 6
[Fri Jun 22 20:49:41 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 20:49:41 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 20:49:41 2012] Assessing source extent using major
[Fri Jun 22 20:49:41 2012] Source does appear to be extended
[Fri Jun 22 20:49:41 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 21:19:56 2012] Using EEF radius (= 7.58 ")to estimate initial spatial extent for simple fitting
[Fri Jun 22 21:19:56 2012] Initial guess for spatial extent in simple fitting = 7.58"
[Fri Jun 22 21:19:56 2012] source mask rpix=1.7, npix_max = 20, mask sum = 25, frac = 1.243
[Fri Jun 22 21:19:56 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 7.58"
[Fri Jun 22 21:32:23 2012] fullrun_mos2_xmm0112960601_pi300-10000_cl_pass1_src6.ximg exists
[Fri Jun 22 21:32:23 2012] fullrun_mos2_xmm0112960601_pi300-10000_cl_pass1_src6_1.ximg exists
[Fri Jun 22 21:32:23 2012] Fit fullrun_mos2_xmm0112960601_pi300-10000_cl_pass1_src6 appears to have run properly
[Fri Jun 22 21:32:24 2012] fullrun_mos2_xmm0112960601_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Fri Jun 22 21:32:24 2012] fullrun_mos2_xmm0112960601_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Fri Jun 22 21:32:24 2012] Fit fullrun_mos2_xmm0112960601_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Fri Jun 22 21:32:30 2012] Spatial fit model total counts = 141.523000, observed total counts = 129.000000
[Fri Jun 22 21:32:30 2012] Offset between fit and detection position for source 5 = 0.413757 pixels
[Fri Jun 22 21:32:30 2012] 137.563800 total counts/ 113.316000 bgd. counts: snr = 2.277858
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.413757 pixels
  Position = (317.4, 324.1) = 20 19 17.35 11 27 52.0
  Extent = 4.3 (2.8-7.8)", rotation angle = 0
  Source counts = 24.2 +/- 11.7
  Background counts = 113.3
  Rate = 0.002 +/- 0.0009
[Fri Jun 22 21:32:30 2012] Vigneting correction estimate = 1.000000
[Fri Jun 22 21:32:30 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jun 22 21:32:30 2012] Assessing source extent using major axis lower bound
[Fri Jun 22 21:32:30 2012] Source does appear to be extended
[Fri Jun 22 21:32:30 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jun 22 21:46:00 2012] XMMSAS src. selection expression = ellipse(27563.452600, 28143.954020, 256.536007, 256.536007, 0.000000, X, Y)
[Fri Jun 22 21:46:00 2012] Writing source region out to fullrun_mos2_xmm0112960601_pi300-10000_pass1_cl_src5_src.reg
[Fri Jun 22 21:46:00 2012] Extracting stamp from image fullrun_mos2_xmm0112960601_pi300-10000_cl_sm2.00.img.gz, (303, 309) - (332, 339)
[Fri Jun 22 21:46:00 2012] XMMSAS bgd. selection expression = annulus(27563.452600, 28143.954020, 427.560012, 855.120025, X, Y) && !ellipse(27377.570600, 27389.445400, 560.965616, 267.768808, 326.897630, X, Y)
[Fri Jun 22 21:46:00 2012] Writing fullrun_mos2_xmm0112960601_pi300-10000_pass1_cl_src5.gif
[Fri Jun 22 21:46:56 2012] Mean detx,y = (22.23, 868.11) 
[Fri Jun 22 21:46:56 2012] Setting backscal keywords in source and bgd. spectrum
[Fri Jun 22 21:47:03 2012] Binned source spectrum to 10 counts/bin
[Fri Jun 22 21:47:03 2012] Setting source spectrum file to fullrun_mos2_xmm0112960601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 21:47:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112960601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri Jun 22 21:48:09 2012] Not generating rmf since there are only 24 counts
[Fri Jun 22 21:48:09 2012] rmf not generated due to insufficient counts
[Fri Jun 22 21:48:51 2012] Updating aperture counts using extracted products
[Fri Jun 22 21:48:51 2012] Error reading totcts from fullrun_mos2_xmm0112960601_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri Jun 22 21:48:51 2012] Calculating source flux in energy range 0.30-8.00
[Fri Jun 22 21:48:51 2012] Using photon index=1.80, rate=0.00179, arf fullrun_mos2_xmm0112960601_pi300-10000_pass1_cl_src5.arf
[Fri Jun 22 21:48:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri Jun 22 21:48:51 2012] Updating source flux to 2.3e-14
[Fri Jun 22 21:48:53 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Fri Jun 22 21:48:54 2012] xmm0112960601/analysis//spectral/fullrun_mos2_xmm0112960601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete