[Tue Jul 31 10:04:56 2012] Detection parameters:
  Position = (320.2, 283.1) = 13 47 26.43 -11 47 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.3 +/- 21.7
  Background counts = 68.3
  Rate = 0.006 +/- 0.0007

[Tue Jul 31 10:04:57 2012] Off-axis axis estimate = 1.93'
[Tue Jul 31 10:10:35 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 10:10:35 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Tue Jul 31 10:10:35 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Tue Jul 31 10:10:35 2012] Giving source the simple spatial ID 41 for pass 0, mean size = 7.39"
[Tue Jul 31 14:03:34 2012] fullrun_pn_xmm0112960101_pi300-10000_cl_pass0_src41.ximg exists
[Tue Jul 31 14:03:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960101_pi300-10000_cl_pass0_src41.csv
[Tue Jul 31 14:03:34 2012] fullrun_pn_xmm0112960101_pi300-10000_cl_pass0_src41_1.ximg exists
[Tue Jul 31 14:03:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960101_pi300-10000_cl_pass0_src41.csv
[Tue Jul 31 14:03:34 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112960101_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112960101_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 14:03:35 2012] fullrun_pn_xmm0112960101_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Tue Jul 31 14:03:35 2012] fullrun_pn_xmm0112960101_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Tue Jul 31 14:03:35 2012] Fit fullrun_pn_xmm0112960101_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Tue Jul 31 16:52:44 2012] Warning, spatial fit 41 centroid is now closest to src. 40
[Tue Jul 31 16:52:44 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 16:52:44 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 16:52:44 2012] Assessing source extent using major
[Tue Jul 31 16:52:44 2012] Source does appear to be extended
[Tue Jul 31 16:52:44 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 16:52:44 2012] Source is confused with source 40
[Tue Jul 31 16:53:22 2012] Using EEF radius (= 7.39 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 16:53:22 2012] Initial guess for spatial extent in simple fitting = 7.39"
[Tue Jul 31 16:53:22 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.826
[Tue Jul 31 16:53:22 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 7.39"
[Tue Jul 31 20:10:57 2012] fullrun_pn_xmm0112960101_pi300-10000_cl_pass1_src32.ximg exists
[Tue Jul 31 20:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960101_pi300-10000_cl_pass1_src32.csv
[Tue Jul 31 20:10:57 2012] fullrun_pn_xmm0112960101_pi300-10000_cl_pass1_src32_1.ximg exists
[Tue Jul 31 20:10:57 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112960101_pi300-10000_cl_pass1_src32.csv
[Tue Jul 31 20:10:57 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112960101_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112960101_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 20:10:58 2012] fullrun_pn_xmm0112960101_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Tue Jul 31 20:10:58 2012] fullrun_pn_xmm0112960101_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Tue Jul 31 20:10:58 2012] Fit fullrun_pn_xmm0112960101_pi300-10000_cl_pass1_tfrozen_src32 appears to have run properly
[Tue Jul 31 21:34:50 2012] Spatial fit model total counts = 2945.490000, observed total counts = 2945.000000
[Tue Jul 31 21:34:50 2012] Offset between fit and detection position for source 43 = 4.192974 pixels
[Tue Jul 31 21:34:50 2012] Warning, changing simple spatial fit ID from 32 to 30
[Tue Jul 31 21:34:50 2012] 2993.270000 total counts/ 1917.400000 bgd. counts: snr = 24.569903
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 4.192974 pixels
  Position = (322.1, 279.4) = 13 47 25.87 -11 48 5.5
  Extent = 29.6 (29.5-59.2)", rotation angle = 0
  Source counts = 1075.9 +/- 54.7
  Background counts = 1917.4
  Rate = 0.03 +/- 0.002
[Tue Jul 31 21:34:50 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 21:34:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 21:34:50 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 21:34:50 2012] Source does appear to be extended
[Tue Jul 31 21:34:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 21:35:05 2012] Counts = 1075.870000, rescaling region sizes by 2.000000
[Tue Jul 31 21:35:05 2012] XMMSAS src. selection expression = ellipse(27978.426000, 24255.814000, 3549.576102, 3549.576102, 0.000000, X, Y)
[Tue Jul 31 21:35:05 2012] Writing source region out to fullrun_pn_xmm0112960101_pi300-10000_pass1_cl_src43_src.reg
[Tue Jul 31 21:35:05 2012] Extracting stamp from image fullrun_pn_xmm0112960101_pi300-10000_cl_sm2.00.img.gz, (118, 75) - (526, 483)
[Tue Jul 31 21:35:05 2012] XMMSAS bgd. selection expression = annulus(27978.426000, 24255.814000, 11831.920340, 23663.840681, X, Y) && !ellipse(26528.852776, 27769.607200, 2976.264086, 2976.264086, 0.000000, X, Y) && !ellipse(25813.705534, 40663.730416, 521.809885, 269.939523, 7.172140, X, Y) && !ellipse(10474.891151, 38299.835144, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15521.976395, 31894.807953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19062.058380, 14567.923477, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26837.362122, 29488.671722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25897.056946, 29073.348145, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21115.497800, 23338.989400, 395.742454, 395.742454, 0.000000, X, Y) && !ellipse(39774.589752, 20840.805878, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31356.919200, 15489.406000, 1782.504051, 1782.504051, 0.000000, X, Y) && !ellipse(35349.237366, 41603.395172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22396.846863, 43678.921844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35511.711884, 35290.359436, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16264.001328, 33277.929535, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27441.022858, 33099.700073, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25908.336600, 33225.758600, 413.591212, 278.462408, 11.334100, X, Y) && !ellipse(24577.202220, 31153.606800, 423.947212, 423.947212, 0.000000, X, Y) && !ellipse(31698.266754, 14584.567856, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26453.837830, 30143.640900, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24737.624237, 30051.415802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20228.829590, 30010.047791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(40023.504059, 29371.069855, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24305.518219, 29351.003143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14772.152313, 28636.991425, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28306.814636, 27703.605255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33708.723969, 27512.352875, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16995.018460, 26816.313800, 404.399212, 404.399212, 0.000000, X, Y) && !ellipse(25545.440796, 25371.172638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(36088.870117, 25241.147888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32128.033691, 25174.177429, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27463.106000, 25156.274000, 1183.192034, 1183.192034, 0.000000, X, Y) && !ellipse(25638.372000, 24550.466000, 1088.064031, 1088.064031, 0.000000, X, Y) && !ellipse(26926.406494, 24760.356598, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28174.684000, 23366.362000, 1294.568037, 1294.568037, 0.000000, X, Y) && !ellipse(28315.344000, 22832.364000, 1322.856038, 1322.856038, 0.000000, X, Y) && !ellipse(28612.376000, 22395.986000, 1294.568037, 1294.568037, 0.000000, X, Y) && !ellipse(28838.293000, 21903.666000, 1318.848038, 1318.848038, 0.000000, X, Y) && !ellipse(29174.927400, 20988.526000, 1435.048041, 651.927219, 65.002000, X, Y) && !ellipse(29727.012600, 19431.718000, 1498.904043, 1498.904043, 0.000000, X, Y) && !ellipse(29728.696000, 19083.618000, 1590.968046, 1345.528039, 53.218000, X, Y) && !ellipse(22257.386139, 18562.047333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30042.160370, 18557.746185, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30282.663544, 18041.192978, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30522.612000, 17488.594000, 1699.312049, 1699.312049, 0.000000, X, Y) && !ellipse(30700.784000, 17065.458000, 1672.024048, 1672.024048, 0.000000, X, Y) && !ellipse(30671.136000, 16833.838000, 2957.904085, 2957.904085, 0.000000, X, Y) && !ellipse(31110.178000, 15826.308000, 1748.400050, 1060.680031, 61.572000, X, Y) && !ellipse(30907.439728, 43690.372986, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 31 21:35:05 2012] Writing fullrun_pn_xmm0112960101_pi300-10000_pass1_cl_src43.gif
[Tue Jul 31 22:15:35 2012] Mean detx,y = (95.78, 1678.55) 
[Tue Jul 31 22:15:44 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 31 22:29:39 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 31 22:29:39 2012] Setting source spectrum file to fullrun_pn_xmm0112960101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Tue Jul 31 22:29:39 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112960101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Wed Aug  1 06:05:55 2012] Updating aperture counts using extracted products
[Wed Aug  1 06:05:55 2012] Error reading totcts from fullrun_pn_xmm0112960101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Wed Aug  1 06:05:56 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 06:05:56 2012] Using photon index=1.80, rate=0.0324, arf fullrun_pn_xmm0112960101_pi300-10000_pass1_cl_src43.arf
[Wed Aug  1 06:05:56 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 06:05:56 2012] Updating source flux to 7.3e-14
[Wed Aug  1 06:07:25 2012] Flag c found in src. 43 procflags, skipping spectral fitting