[Sun Sep  2 06:05:51 2012] Detection parameters:
  Position = (156.6, 397.5) = 17 12 2.47 78 50 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 32.9 +/- 8.1
  Background counts = 8.5
  Rate = 0.002 +/- 0.0005

[Sun Sep  2 06:05:51 2012] Off-axis axis estimate = 12.54'
[Sun Sep  2 07:27:31 2012] Using EEF radius (= 12.70 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 07:27:31 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 07:27:31 2012] Initial guess for spatial extent in simple fitting = 12.70"
[Sun Sep  2 07:27:31 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.048
[Sun Sep  2 07:27:31 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.70"
[Sun Sep  2 07:33:29 2012] fullrun_mos2_xmm0112951601_pi300-10000_cl_pass0_src7.ximg exists
[Sun Sep  2 07:33:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112951601_pi300-10000_cl_pass0_src7.csv
[Sun Sep  2 07:33:29 2012] fullrun_mos2_xmm0112951601_pi300-10000_cl_pass0_src7_1.ximg exists
[Sun Sep  2 07:33:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112951601_pi300-10000_cl_pass0_src7.csv
[Sun Sep  2 07:33:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112951601_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112951601_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 07:33:29 2012] fullrun_mos2_xmm0112951601_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Sun Sep  2 07:33:29 2012] fullrun_mos2_xmm0112951601_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Sun Sep  2 07:33:29 2012] Fit fullrun_mos2_xmm0112951601_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Sun Sep  2 07:33:36 2012] Spatial fit model total counts = 88.763900, observed total counts = 87.000000
[Sun Sep  2 07:33:36 2012] Offset between fit and detection position for source 7 = 0.267106 pixels
[Sun Sep  2 07:33:36 2012] 88.118600 total counts/ 74.614200 bgd. counts: snr = 1.563380
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 0.267106 pixels
  Position = (156.4, 397.4) = 17 12 2.81 78 50 56.6
  Extent = 4.2 (3.2-8.6)", rotation angle = 0
  Source counts = 13.5 +/- 9.4
  Background counts = 74.6
  Rate = 0.0009 +/- 0.0006
  Deleting source due to low Poisson probability