[Sun Sep  2 06:05:39 2012] Detection parameters:
  Position = (294.0, 182.3) = 17 8 36.22 78 35 26.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.5 +/- 10.9
  Background counts = 15.6
  Rate = 0.007 +/- 0.001

[Sun Sep  2 06:05:39 2012] Off-axis axis estimate = 8.42'
[Sun Sep  2 07:19:04 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 07:19:04 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 07:19:04 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Sep  2 07:19:04 2012] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.008
[Sun Sep  2 07:19:04 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 10.64"
[Sun Sep  2 07:27:31 2012] fullrun_mos1_xmm0112951601_pi300-10000_cl_pass0_src3.ximg exists
[Sun Sep  2 07:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951601_pi300-10000_cl_pass0_src3.csv
[Sun Sep  2 07:27:31 2012] fullrun_mos1_xmm0112951601_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun Sep  2 07:27:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951601_pi300-10000_cl_pass0_src3.csv
[Sun Sep  2 07:27:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112951601_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112951601_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 07:27:31 2012] fullrun_mos1_xmm0112951601_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun Sep  2 07:27:31 2012] fullrun_mos1_xmm0112951601_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun Sep  2 07:27:31 2012] Fit fullrun_mos1_xmm0112951601_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun Sep  2 07:33:35 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 13.349731 pixels away
[Sun Sep  2 07:33:35 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 07:33:35 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 07:33:35 2012] Assessing source extent using major
[Sun Sep  2 07:33:35 2012] Source does appear to be extended
[Sun Sep  2 07:33:35 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 13:09:18 2012] Using EEF radius (= 10.64 ")to estimate initial spatial extent for simple fitting
[Sun Sep  2 13:09:18 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Sep  2 13:09:18 2012] Initial guess for spatial extent in simple fitting = 10.64"
[Sun Sep  2 13:09:18 2012] source mask rpix=2.4, npix_max = 34, mask sum = 35, frac = 1.008
[Sun Sep  2 13:09:18 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 10.64"
[Sun Sep  2 13:19:34 2012] fullrun_mos1_xmm0112951601_pi300-10000_cl_pass1_src3.ximg exists
[Sun Sep  2 13:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951601_pi300-10000_cl_pass1_src3.csv
[Sun Sep  2 13:19:34 2012] fullrun_mos1_xmm0112951601_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun Sep  2 13:19:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951601_pi300-10000_cl_pass1_src3.csv
[Sun Sep  2 13:19:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112951601_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112951601_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Sep  2 13:19:35 2012] fullrun_mos1_xmm0112951601_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun Sep  2 13:19:35 2012] fullrun_mos1_xmm0112951601_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun Sep  2 13:19:35 2012] Fit fullrun_mos1_xmm0112951601_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun Sep  2 13:25:56 2012] Spatial fit model total counts = 143.360000, observed total counts = 144.000000
[Sun Sep  2 13:25:56 2012] Offset between fit and detection position for source 5 = 0.313854 pixels
[Sun Sep  2 13:25:56 2012] 145.209100 total counts/ 103.633000 bgd. counts: snr = 4.084084
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.313854 pixels
  Position = (294.0, 182.0) = 17 8 36.31 78 35 24.5
  Extent = 6.6 (4.7-8.6)", rotation angle = 0
  Source counts = 41.6 +/- 12.1
  Background counts = 103.6
  Rate = 0.003 +/- 0.0008
[Sun Sep  2 13:25:56 2012] Vigneting correction estimate = 1.000000
[Sun Sep  2 13:25:56 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Sep  2 13:25:56 2012] Assessing source extent using major axis lower bound
[Sun Sep  2 13:25:56 2012] Source does appear to be extended
[Sun Sep  2 13:25:56 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Sep  2 13:38:14 2012] XMMSAS src. selection expression = ellipse(25526.010920, 15786.643000, 394.629611, 394.629611, 0.000000, X, Y)
[Sun Sep  2 13:38:14 2012] Writing source region out to fullrun_mos1_xmm0112951601_pi300-10000_pass1_cl_src5_src.reg
[Sun Sep  2 13:38:14 2012] Extracting stamp from image fullrun_mos1_xmm0112951601_pi300-10000_cl_sm2.00.img.gz, (271, 159) - (317, 205)
[Sun Sep  2 13:38:14 2012] XMMSAS bgd. selection expression = annulus(25526.010920, 15786.643000, 657.716019, 1315.432038, X, Y)
[Sun Sep  2 13:38:14 2012] Writing fullrun_mos1_xmm0112951601_pi300-10000_pass1_cl_src5.gif
[Sun Sep  2 13:38:54 2012] Mean detx,y = (-10508.57, 3073.51) 
[Sun Sep  2 13:38:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Sep  2 13:39:02 2012] grppha failed
[Sun Sep  2 13:39:02 2012] Setting source spectrum file to fullrun_mos1_xmm0112951601_pi300-10000_pass1_cl_src5_src.pi.gz
[Sun Sep  2 13:39:02 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112951601_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun Sep  2 13:40:52 2012] Not generating rmf since there are only 41 counts
[Sun Sep  2 13:40:52 2012] rmf not generated due to insufficient counts
[Sun Sep  2 13:42:40 2012] Updating aperture counts using extracted products
[Sun Sep  2 13:42:40 2012] Error reading totcts from fullrun_mos1_xmm0112951601_pi300-10000_pass1_cl_src5_src.pi.gz
[Sun Sep  2 13:42:40 2012] No arf file for this source, not re-computing flux
[Sun Sep  2 13:42:41 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Sep  2 13:42:42 2012] xmm0112951601/analysis//spectral/fullrun_mos1_xmm0112951601_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete