[Fri May 18 04:18:25 2012] Detection parameters:
  Position = (163.9, 258.0) = 17 3 17.72 78 40 39.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 91.0 +/- 16.9
  Background counts = 110.4
  Rate = 0.009 +/- 0.002

[Fri May 18 04:18:27 2012] Off-axis axis estimate = 10.18'
[Fri May 18 04:22:33 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Fri May 18 04:22:33 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Fri May 18 04:22:33 2012] source mask rpix=2.6, npix_max = 39, mask sum = 31, frac = 0.782
[Fri May 18 04:22:33 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.52"
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src8.ximg exists
[Fri May 18 07:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src8.csv
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri May 18 07:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src8.csv
[Fri May 18 07:39:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri May 18 07:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri May 18 07:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src8.csv
[Fri May 18 07:39:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 10:32:13 2012] Source 8 is offset by -2.490673 and -1.916175 pixels which is larger than
2 X fitted extent = 1.325894 x 1.325894, not incorporating fit results
[Fri May 18 10:32:13 2012] Source 8 is offset by 2.425879 and 6.507089 pixels which is larger than
2 X fitted extent = 1.316828 x 1.316828, not incorporating fit results
[Fri May 18 10:32:13 2012] Vigneting correction estimate = 1.000000
[Fri May 18 10:32:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 10:32:13 2012] Assessing source extent using major
[Fri May 18 10:32:13 2012] Source does appear to be extended
[Fri May 18 10:32:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 10:32:13 2012] Source is confused with source 3
[Fri May 18 10:32:45 2012] Using EEF radius (= 11.52 ")to estimate initial spatial extent for simple fitting
[Fri May 18 10:32:45 2012] Initial guess for spatial extent in simple fitting = 11.52"
[Fri May 18 10:32:45 2012] source mask rpix=2.6, npix_max = 39, mask sum = 31, frac = 0.782
[Fri May 18 10:32:45 2012] Giving source the simple spatial ID 8 for pass 1, mean size = 11.52"
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src8.ximg exists
[Fri May 18 13:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src8.csv
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src8_1.ximg exists
[Fri May 18 13:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src8.csv
[Fri May 18 13:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Fri May 18 13:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Fri May 18 13:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src8.csv
[Fri May 18 13:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 16:38:38 2012] Warning: source 8 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 15.086310 pixels away
[Fri May 18 16:38:38 2012] Source 8 is offset by 1.679120 and 3.429319 pixels which is larger than
2 X fitted extent = 1.329384 x 1.329384, not incorporating fit results
[Fri May 18 16:38:38 2012] Vigneting correction estimate = 1.000000
[Fri May 18 16:38:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 16:38:38 2012] Assessing source extent using major
[Fri May 18 16:38:38 2012] Source does appear to be extended
[Fri May 18 16:38:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 16:39:06 2012] XMMSAS src. selection expression = ellipse(14210.041458, 22401.126770, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 16:39:06 2012] Writing source region out to fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src8_src.reg
[Fri May 18 16:39:06 2012] Extracting stamp from image fullrun_pn_xmm0112951501_pi300-10000_cl_sm2.00.img.gz, (126, 221) - (201, 296)
[Fri May 18 16:39:06 2012] XMMSAS bgd. selection expression = annulus(14210.041458, 22401.126770, 1087.500000, 2175.000000, X, Y) && !ellipse(14967.834000, 20224.234000, 3332.624096, 3332.624096, 0.000000, X, Y) && !ellipse(13753.531738, 22430.425018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(11451.116882, 25243.011719, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16503.911102, 21835.779434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12524.277069, 21806.811737, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14458.734070, 21360.588928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13540.705917, 21432.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16145.823318, 20896.341125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14971.864944, 20831.870377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13459.513794, 20758.951324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(12949.383102, 20833.008057, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14340.021072, 20657.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15589.414139, 20641.147675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13886.196000, 20194.110200, 1885.912054, 1885.912054, 0.000000, X, Y) && !ellipse(16509.507904, 20296.344330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17198.692444, 20492.979782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16630.388733, 19625.121063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15949.596000, 19362.649000, 1798.736052, 1798.736052, 0.000000, X, Y) && !ellipse(15764.086000, 19660.836800, 1666.312048, 1666.312048, 0.000000, X, Y) && !ellipse(17130.568000, 19440.596994, 1310.616038, 1310.616038, 0.000000, X, Y) && !ellipse(17611.592000, 18700.326000, 2621.232075, 2621.232075, 0.000000, X, Y)
[Fri May 18 16:39:06 2012] Writing fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src8.gif
[Fri May 18 17:02:17 2012] Mean detx,y = (-7100.01, -9086.14) 
[Fri May 18 17:02:21 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 17:03:01 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 17:03:02 2012] Setting source spectrum file to fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri May 18 17:03:02 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Fri May 18 17:35:59 2012] Not generating rmf since there are only 90 counts
[Fri May 18 17:35:59 2012] rmf not generated due to insufficient counts
[Fri May 18 18:35:24 2012] Updating aperture counts using extracted products
[Fri May 18 18:35:24 2012] Error reading totcts from fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Fri May 18 18:35:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 18:35:26 2012] Using photon index=1.80, rate=0.00908, arf fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src8.arf
[Fri May 18 18:35:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 18:35:26 2012] Updating source flux to 6e-14
[Fri May 18 18:36:32 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting