[Fri May 18 04:18:24 2012] Detection parameters:
  Position = (307.5, 198.8) = 16 59 45.64 78 36 27.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 112.7 +/- 13.9
  Background counts = 16.0
  Rate = 0.01 +/- 0.001

[Fri May 18 04:18:27 2012] Off-axis axis estimate = 7.25'
[Fri May 18 04:22:33 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri May 18 04:22:33 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Fri May 18 04:22:33 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.949
[Fri May 18 04:22:33 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.06"
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src5.ximg exists
[Fri May 18 07:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src5.csv
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May 18 07:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src5.csv
[Fri May 18 07:39:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May 18 07:39:42 2012] Fit fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri May 18 10:32:13 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.860411 pixels away
[Fri May 18 10:32:13 2012] Vigneting correction estimate = 1.000000
[Fri May 18 10:32:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 10:32:13 2012] Assessing source extent using major
[Fri May 18 10:32:13 2012] Source does appear to be extended
[Fri May 18 10:32:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 10:32:45 2012] Using EEF radius (= 10.06 ")to estimate initial spatial extent for simple fitting
[Fri May 18 10:32:45 2012] Initial guess for spatial extent in simple fitting = 10.06"
[Fri May 18 10:32:45 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.949
[Fri May 18 10:32:45 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.06"
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 18 13:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src5.csv
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 18 13:29:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src5.csv
[Fri May 18 13:29:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 18 13:29:28 2012] Fit fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri May 18 16:38:38 2012] Spatial fit model total counts = 230.381000, observed total counts = 231.000000
[Fri May 18 16:38:38 2012] Offset between fit and detection position for source 5 = 0.137009 pixels
[Fri May 18 16:38:38 2012] 230.583600 total counts/ 156.483000 bgd. counts: snr = 5.923633
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.137009 pixels
  Position = (307.4, 198.7) = 16 59 45.81 78 36 28.0
  Extent = 5.5 (4.3-6.9)", rotation angle = 0
  Source counts = 74.1 +/- 15.2
  Background counts = 156.5
  Rate = 0.008 +/- 0.002
[Fri May 18 16:38:38 2012] Vigneting correction estimate = 1.000000
[Fri May 18 16:38:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 16:38:38 2012] Assessing source extent using major axis lower bound
[Fri May 18 16:38:38 2012] Source does appear to be extended
[Fri May 18 16:38:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 16:39:06 2012] XMMSAS src. selection expression = ellipse(26695.950400, 17240.076400, 331.503610, 331.503610, 0.000000, X, Y)
[Fri May 18 16:39:06 2012] Writing source region out to fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src5_src.reg
[Fri May 18 16:39:06 2012] Extracting stamp from image fullrun_pn_xmm0112951501_pi300-10000_cl_sm2.00.img.gz, (288, 180) - (326, 218)
[Fri May 18 16:39:06 2012] XMMSAS bgd. selection expression = annulus(26695.950400, 17240.076400, 552.506016, 1105.012032, X, Y)
[Fri May 18 16:39:06 2012] Writing fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src5.gif
[Fri May 18 16:59:37 2012] Mean detx,y = (-9315.83, 4263.55) 
[Fri May 18 16:59:41 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 17:00:00 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 17:00:01 2012] Setting source spectrum file to fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May 18 17:00:01 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May 18 17:32:28 2012] Not generating rmf since there are only 74 counts
[Fri May 18 17:32:28 2012] rmf not generated due to insufficient counts
[Fri May 18 18:35:24 2012] Updating aperture counts using extracted products
[Fri May 18 18:35:24 2012] Error reading totcts from fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May 18 18:35:26 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 18:35:26 2012] Using photon index=1.80, rate=0.00842, arf fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src5.arf
[Fri May 18 18:35:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 18:35:26 2012] Updating source flux to 5e-14
[Fri May 18 18:36:32 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting