[Fri May 18 04:18:26 2012] Detection parameters:
  Position = (200.8, 223.0) = 17 2 22.71 78 38 13.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 74.5 +/- 17.0
  Background counts = 80.4
  Rate = 0.007 +/- 0.002

[Fri May 18 04:18:27 2012] Off-axis axis estimate = 8.95'
[Fri May 18 04:22:33 2012] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting
[Fri May 18 04:22:33 2012] Initial guess for spatial extent in simple fitting = 10.90"
[Fri May 18 04:22:33 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.996
[Fri May 18 04:22:33 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 10.90"
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src27.ximg exists
[Fri May 18 07:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src27.csv
[Fri May 18 07:39:42 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri May 18 07:39:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src27.csv
[Fri May 18 07:39:42 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 07:39:43 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri May 18 07:39:43 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri May 18 07:39:43 2012] Fit fullrun_pn_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Fri May 18 10:32:13 2012] Source 27 is offset by -0.069430 and -4.126647 pixels which is larger than
2 X fitted extent = 1.230575 x 1.230575, not incorporating fit results
[Fri May 18 10:32:13 2012] Spatial fit model total counts = 1181.260000, observed total counts = 1180.000000
[Fri May 18 10:32:13 2012] Offset between fit and detection position for source 27 = 3.464706 pixels
[Fri May 18 10:32:13 2012] 1130.576000 total counts/ 1004.110000 bgd. counts: snr = 3.991013
Spatial fit parameters:
  Offset between fit and detection position for source 27 = 3.464706 pixels
  Position = (197.5, 224.0) = 17 2 27.62 78 38 15.7
  Extent = 16.4 (6.1-21.8)", rotation angle = 0
  Source counts = 126.5 +/- 33.6
  Background counts = 1004.1
  Rate = 0.01 +/- 0.004
[Fri May 18 10:32:13 2012] Vigneting correction estimate = 1.000000
[Fri May 18 10:32:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 10:32:13 2012] Assessing source extent using major axis lower bound
[Fri May 18 10:32:13 2012] Source does appear to be extended
[Fri May 18 10:32:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 10:32:13 2012] Source is confused with source 24
[Fri May 18 10:32:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri May 18 10:32:45 2012] Initial guess for spatial extent in simple fitting = 16.38"
[Fri May 18 10:32:45 2012] source mask rpix=3.8, npix_max = 72, mask sum = 72, frac = 0.989
[Fri May 18 10:32:45 2012] Giving source the simple spatial ID 26 for pass 1, mean size = 16.38"
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src26.ximg exists
[Fri May 18 13:29:28 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src26_1.ximg exists
[Fri May 18 13:29:28 2012] Fit fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_src26 appears to have run properly
[Fri May 18 13:29:29 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Fri May 18 13:29:29 2012] fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Fri May 18 13:29:29 2012] Fit fullrun_pn_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Fri May 18 16:38:38 2012] Source 27 is offset by 0.118115 and -1.624074 pixels which is larger than
2 X fitted extent = 1.292952 x 1.292952, not incorporating fit results
[Fri May 18 16:38:38 2012] Warning, spatial fit 26 centroid is now closest to src. 29
[Fri May 18 16:38:38 2012] Vigneting correction estimate = 1.000000
[Fri May 18 16:38:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 16:38:38 2012] Assessing source extent using major axis lower bound
[Fri May 18 16:38:38 2012] Source does appear to be extended
[Fri May 18 16:38:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 16:39:07 2012] XMMSAS src. selection expression = ellipse(17130.568000, 19440.596994, 982.962028, 982.962028, 0.000000, X, Y)
[Fri May 18 16:39:07 2012] Writing source region out to fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src27_src.reg
[Fri May 18 16:39:07 2012] Extracting stamp from image fullrun_pn_xmm0112951501_pi300-10000_cl_sm2.00.img.gz, (141, 168) - (254, 281)
[Fri May 18 16:39:07 2012] XMMSAS bgd. selection expression = annulus(17130.568000, 19440.596994, 1638.270047, 3276.540094, X, Y) && !ellipse(14967.834000, 20224.234000, 3332.624096, 3332.624096, 0.000000, X, Y) && !ellipse(13753.531738, 22430.425018, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14210.041458, 22401.126770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16503.911102, 21835.779434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14458.734070, 21360.588928, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13540.705917, 21432.747314, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16145.823318, 20896.341125, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14971.864944, 20831.870377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13459.513794, 20758.951324, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14340.021072, 20657.619476, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15589.414139, 20641.147675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13886.196000, 20194.110200, 1885.912054, 1885.912054, 0.000000, X, Y) && !ellipse(16509.507904, 20296.344330, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17198.692444, 20492.979782, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16630.388733, 19625.121063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15949.596000, 19362.649000, 1798.736052, 1798.736052, 0.000000, X, Y) && !ellipse(15764.086000, 19660.836800, 1666.312048, 1666.312048, 0.000000, X, Y) && !ellipse(17611.592000, 18700.326000, 2621.232075, 2621.232075, 0.000000, X, Y)
[Fri May 18 16:39:07 2012] Writing fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src27.gif
[Fri May 18 17:15:57 2012] Mean detx,y = (-9406.63, -5634.52) 
[Fri May 18 17:16:02 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 17:16:31 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 17:16:31 2012] Setting source spectrum file to fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri May 18 17:16:31 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src27_bgd.pi.gz
[Fri May 18 18:35:25 2012] Updating aperture counts using extracted products
[Fri May 18 18:35:25 2012] Error reading totcts from fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src27_src_b10.pi.gz
[Fri May 18 18:35:27 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 18:35:27 2012] Using photon index=1.80, rate=0.0144, arf fullrun_pn_xmm0112951501_pi300-10000_pass1_cl_src27.arf
[Fri May 18 18:35:27 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 18:35:27 2012] Updating source flux to 7.3e-14
[Fri May 18 18:36:32 2012] Flag b found in src. 27 procflags, skipping spectral fitting
[Fri May 18 18:36:32 2012] Flag c found in src. 27 procflags, skipping spectral fitting