[Fri May 18 04:19:17 2012] Detection parameters:
  Position = (307.3, 198.3) = 16 59 45.91 78 36 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 50.2 +/- 9.7
  Background counts = 9.0
  Rate = 0.007 +/- 0.001

[Fri May 18 04:19:17 2012] Off-axis axis estimate = 7.29'
[Fri May 18 07:39:43 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Fri May 18 07:39:43 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Fri May 18 07:39:43 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946
[Fri May 18 07:39:43 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.07"
[Fri May 18 09:28:31 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src5.ximg exists
[Fri May 18 09:28:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src5.csv
[Fri May 18 09:28:31 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src5_1.ximg exists
[Fri May 18 09:28:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src5.csv
[Fri May 18 09:28:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 09:28:31 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Fri May 18 09:28:31 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Fri May 18 09:28:31 2012] Fit fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Fri May 18 10:32:23 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 25 at 13.378522 pixels away
[Fri May 18 10:32:23 2012] Vigneting correction estimate = 1.000000
[Fri May 18 10:32:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 10:32:23 2012] Assessing source extent using major
[Fri May 18 10:32:23 2012] Source does appear to be extended
[Fri May 18 10:32:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 13:29:30 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Fri May 18 13:29:30 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Fri May 18 13:29:30 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946
[Fri May 18 13:29:30 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.07"
[Fri May 18 15:10:58 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src5.ximg exists
[Fri May 18 15:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src5.csv
[Fri May 18 15:10:58 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src5_1.ximg exists
[Fri May 18 15:10:58 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src5.csv
[Fri May 18 15:10:58 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Fri May 18 15:10:59 2012] Fit fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Fri May 18 16:38:45 2012] Spatial fit model total counts = 107.000000, observed total counts = 107.000000
[Fri May 18 16:38:45 2012] Offset between fit and detection position for source 25 = 0.866584 pixels
[Fri May 18 16:38:45 2012] 104.721700 total counts/ 60.275600 bgd. counts: snr = 5.724834
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 0.866584 pixels
  Position = (308.2, 198.2) = 16 59 44.65 78 36 25.9
  Extent = 7.3 (5.5-9.5)", rotation angle = 0
  Source counts = 44.4 +/- 10.2
  Background counts = 60.3
  Rate = 0.003 +/- 0.0008
[Fri May 18 16:38:45 2012] Vigneting correction estimate = 1.000000
[Fri May 18 16:38:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 16:38:45 2012] Assessing source extent using major axis lower bound
[Fri May 18 16:38:45 2012] Source does appear to be extended
[Fri May 18 16:38:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 17:57:11 2012] XMMSAS src. selection expression = ellipse(26764.865000, 17198.859000, 437.962213, 437.962213, 0.000000, X, Y)
[Fri May 18 17:57:11 2012] Writing source region out to fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src25_src.reg
[Fri May 18 17:57:11 2012] Extracting stamp from image fullrun_mos1_xmm0112951501_pi300-10000_cl_sm2.00.img.gz, (283, 173) - (333, 223)
[Fri May 18 17:57:11 2012] XMMSAS bgd. selection expression = annulus(26764.865000, 17198.859000, 729.937021, 1459.874042, X, Y)
[Fri May 18 17:57:11 2012] Writing fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src25.gif
[Fri May 18 17:58:14 2012] Mean detx,y = (-4290.74, -9637.82) 
[Fri May 18 17:58:16 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 17:58:34 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 17:58:34 2012] Setting source spectrum file to fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri May 18 17:58:34 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Fri May 18 18:09:11 2012] Not generating rmf since there are only 44 counts
[Fri May 18 18:09:11 2012] rmf not generated due to insufficient counts
[Fri May 18 18:35:27 2012] Updating aperture counts using extracted products
[Fri May 18 18:35:27 2012] Error reading totcts from fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Fri May 18 18:35:28 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 18:35:28 2012] Using photon index=1.80, rate=0.00348, arf fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src25.arf
[Fri May 18 18:35:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 18:35:28 2012] Updating source flux to 6.9e-14
[Fri May 18 18:35:31 2012] Source 25 has fewer than 100.000000 counts, skipping spectral fitting