[Fri May 18 04:19:16 2012] Detection parameters:
  Position = (176.7, 238.1) = 17 2 58.37 78 39 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.8 +/- 14.9
  Background counts = 56.0
  Rate = 0.005 +/- 0.001

[Fri May 18 04:19:17 2012] Off-axis axis estimate = 9.85'
[Fri May 18 07:39:43 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Fri May 18 07:39:43 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Fri May 18 07:39:43 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.931
[Fri May 18 07:39:43 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 11.35"
[Fri May 18 09:28:31 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src17.ximg exists
[Fri May 18 09:28:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src17.csv
[Fri May 18 09:28:31 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri May 18 09:28:31 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src17.csv
[Fri May 18 09:28:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 09:28:32 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri May 18 09:28:32 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri May 18 09:28:32 2012] Fit fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri May 18 10:32:23 2012] Warning, spatial fit 17 centroid is now closest to src. 4
[Fri May 18 10:32:23 2012] Vigneting correction estimate = 1.000000
[Fri May 18 10:32:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 10:32:23 2012] Assessing source extent using major
[Fri May 18 10:32:23 2012] Source does appear to be extended
[Fri May 18 10:32:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 10:32:23 2012] Source is confused with source 1
[Fri May 18 13:29:30 2012] Using EEF radius (= 11.35 ")to estimate initial spatial extent for simple fitting
[Fri May 18 13:29:30 2012] Initial guess for spatial extent in simple fitting = 11.35"
[Fri May 18 13:29:30 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.931
[Fri May 18 13:29:30 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 11.35"
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src15.ximg exists
[Fri May 18 15:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src15.csv
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src15_1.ximg exists
[Fri May 18 15:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src15.csv
[Fri May 18 15:10:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Fri May 18 15:10:59 2012] Fit fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Fri May 18 16:38:45 2012] Warning, spatial fit 15 centroid is now closest to src. 10
[Fri May 18 16:38:45 2012] Source 15 is offset by 3.248566 and 5.631576 pixels which is larger than
2 X fitted extent = 1.313163 x 1.313163, not incorporating fit results
[Fri May 18 16:38:45 2012] Spatial fit model total counts = 438.884000, observed total counts = 962.000000
[Fri May 18 16:38:45 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May 18 16:38:45 2012] Vigneting correction estimate = 1.000000
[Fri May 18 16:38:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 16:38:45 2012] Assessing source extent using major
[Fri May 18 16:38:45 2012] Source does appear to be extended
[Fri May 18 16:38:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 17:57:12 2012] XMMSAS src. selection expression = ellipse(15328.163239, 20669.409134, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 18 17:57:12 2012] Writing source region out to fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src15_src.reg
[Fri May 18 17:57:12 2012] Extracting stamp from image fullrun_mos1_xmm0112951501_pi300-10000_cl_sm2.00.img.gz, (139, 201) - (214, 276)
[Fri May 18 17:57:12 2012] XMMSAS bgd. selection expression = annulus(15328.163239, 20669.409134, 1087.500000, 2175.000000, X, Y) && !ellipse(17560.776000, 20400.078000, 1475.240042, 609.982418, 60.347000, X, Y) && !ellipse(15116.728000, 21628.982000, 1838.424053, 1838.424053, 0.000000, X, Y) && !ellipse(14199.034200, 20548.433200, 679.428820, 679.428820, 0.000000, X, Y) && !ellipse(14658.669724, 21092.132278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15546.804901, 21179.688507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16480.917221, 20845.701752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13830.798401, 21991.297775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15865.555771, 20484.122604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15963.384308, 19227.983109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16223.276000, 21160.266000, 1742.600050, 1742.600050, 0.000000, X, Y) && !ellipse(17659.154175, 20063.803589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17112.880569, 18755.591003, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 17:57:12 2012] Writing fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src15.gif
[Fri May 18 18:02:25 2012] Mean detx,y = (7646.39, -8995.78) 
[Fri May 18 18:02:28 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 18:02:43 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 18:02:43 2012] Setting source spectrum file to fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri May 18 18:02:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Fri May 18 18:14:11 2012] Not generating rmf since there are only 66 counts
[Fri May 18 18:14:11 2012] rmf not generated due to insufficient counts
[Fri May 18 18:35:27 2012] Updating aperture counts using extracted products
[Fri May 18 18:35:28 2012] Error reading totcts from fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Fri May 18 18:35:28 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 18:35:28 2012] Using photon index=1.80, rate=0.00468, arf fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src15.arf
[Fri May 18 18:35:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 18:35:28 2012] Updating source flux to 9.5e-14
[Fri May 18 18:35:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting