[Fri May 18 04:19:16 2012] Detection parameters:
  Position = (183.7, 241.2) = 17 2 48.11 78 39 26.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 54.7 +/- 13.8
  Background counts = 52.7
  Rate = 0.004 +/- 0.001

[Fri May 18 04:19:17 2012] Off-axis axis estimate = 9.29'
[Fri May 18 07:39:43 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Fri May 18 07:39:43 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Fri May 18 07:39:43 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Fri May 18 07:39:43 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 11.07"
[Fri May 18 09:28:31 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src21.ximg exists
[Fri May 18 09:28:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src21.csv
[Fri May 18 09:28:31 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri May 18 09:28:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src21.csv
[Fri May 18 09:28:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 09:28:32 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri May 18 09:28:32 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri May 18 09:28:32 2012] Fit fullrun_mos1_xmm0112951501_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Fri May 18 10:32:23 2012] Warning, spatial fit 21 centroid is now closest to src. 14
[Fri May 18 10:32:23 2012] Vigneting correction estimate = 1.000000
[Fri May 18 10:32:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 10:32:23 2012] Assessing source extent using major
[Fri May 18 10:32:23 2012] Source does appear to be extended
[Fri May 18 10:32:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 10:32:23 2012] Source is confused with source 1
[Fri May 18 13:29:30 2012] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Fri May 18 13:29:30 2012] Initial guess for spatial extent in simple fitting = 11.07"
[Fri May 18 13:29:30 2012] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.970
[Fri May 18 13:29:30 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 11.07"
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src19.ximg exists
[Fri May 18 15:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src19.csv
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri May 18 15:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src19.csv
[Fri May 18 15:10:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri May 18 15:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 18 15:10:59 2012] fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri May 18 15:10:59 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src19.csv
[Fri May 18 15:10:59 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112951501_pi300-10000_cl_pass1_tfrozen_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 16:38:45 2012] Spatial fit model total counts = 838.633000, observed total counts = 838.000000
[Fri May 18 16:38:45 2012] Offset between fit and detection position for source 11 = 4.160536 pixels
[Fri May 18 16:38:45 2012] Warning, changing simple spatial fit ID from 19 to 13
[Fri May 18 16:38:45 2012] 815.148000 total counts/ 665.505000 bgd. counts: snr = 5.800705
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 4.160536 pixels
  Position = (187.0, 243.8) = 17 2 43.31 78 39 41.2
  Extent = 21.8 (21.7-43.6)", rotation angle = 0
  Source counts = 149.6 +/- 28.6
  Background counts = 665.5
  Rate = 0.01 +/- 0.002
[Fri May 18 16:38:45 2012] Vigneting correction estimate = 1.000000
[Fri May 18 16:38:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 16:38:45 2012] Assessing source extent using major axis lower bound
[Fri May 18 16:38:45 2012] Source does appear to be extended
[Fri May 18 16:38:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 17:57:12 2012] XMMSAS src. selection expression = ellipse(16223.276000, 21160.266000, 1306.950038, 1306.950038, 0.000000, X, Y)
[Fri May 18 17:57:12 2012] Writing source region out to fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src11_src.reg
[Fri May 18 17:57:12 2012] Extracting stamp from image fullrun_mos1_xmm0112951501_pi300-10000_cl_sm2.00.img.gz, (112, 169) - (262, 319)
[Fri May 18 17:57:12 2012] XMMSAS bgd. selection expression = annulus(16223.276000, 21160.266000, 2178.250063, 4356.500125, X, Y) && !ellipse(17560.776000, 20400.078000, 1475.240042, 609.982418, 60.347000, X, Y) && !ellipse(15116.728000, 21628.982000, 1838.424053, 1838.424053, 0.000000, X, Y) && !ellipse(14199.034200, 20548.433200, 679.428820, 679.428820, 0.000000, X, Y) && !ellipse(14658.669724, 21092.132278, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15546.804901, 21179.688507, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16480.917221, 20845.701752, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15328.163239, 20669.409134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(13830.798401, 21991.297775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15865.555771, 20484.122604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15963.384308, 19227.983109, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17659.154175, 20063.803589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17112.880569, 18755.591003, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 18 17:57:12 2012] Writing fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src11.gif
[Fri May 18 18:03:51 2012] Mean detx,y = (6961.90, -8365.78) 
[Fri May 18 18:03:54 2012] Setting backscal keywords in source and bgd. spectrum
[Fri May 18 18:04:42 2012] Binned source spectrum to 10 counts/bin
[Fri May 18 18:04:42 2012] Setting source spectrum file to fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri May 18 18:04:42 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Fri May 18 18:35:28 2012] Updating aperture counts using extracted products
[Fri May 18 18:35:28 2012] Error reading totcts from fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Fri May 18 18:35:28 2012] Calculating source flux in energy range 0.30-8.00
[Fri May 18 18:35:28 2012] Using photon index=1.80, rate=0.0117, arf fullrun_mos1_xmm0112951501_pi300-10000_pass1_cl_src11.arf
[Fri May 18 18:35:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 18 18:35:28 2012] Updating source flux to 1.9e-13
[Fri May 18 18:35:31 2012] Flag c found in src. 11 procflags, skipping spectral fitting