[Thu Jun 13 10:25:58 2013] Detection parameters:
  Position = (278.7, 485.6) = 17 4 5.73 78 39 57.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 81.5 +/- 17.1
  Background counts = 102.1
  Rate = 0.004 +/- 0.0009

[Thu Jun 13 10:25:58 2013] Off-axis axis estimate = 13.65'
[Thu Jun 13 11:49:28 2013] Using EEF radius (= 13.25 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 11:49:28 2013] Initial guess for spatial extent in simple fitting = 13.25"
[Thu Jun 13 11:49:28 2013] source mask rpix=3.0, npix_max = 50, mask sum = 48, frac = 0.954
[Thu Jun 13 11:49:28 2013] Giving source the simple spatial ID 30 for pass 0, mean size = 13.25"
[Thu Jun 13 13:40:13 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src30.ximg exists
[Thu Jun 13 13:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src30.csv
[Thu Jun 13 13:40:13 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src30_1.ximg exists
[Thu Jun 13 13:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src30.csv
[Thu Jun 13 13:40:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:40:14 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Thu Jun 13 13:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun 13 13:40:14 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Thu Jun 13 13:40:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src30.csv
[Thu Jun 13 13:40:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:40:28 2013] Spatial fit model total counts = 829.947000, observed total counts = 787.000000
[Thu Jun 13 13:40:28 2013] Offset between fit and detection position for source 7 = 2.267890 pixels
[Thu Jun 13 13:40:28 2013] Warning, changing simple spatial fit ID from 30 to 13
[Thu Jun 13 13:40:28 2013] 767.226000 total counts/ 391.793000 bgd. counts: snr = 18.967239
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 2.267890 pixels
  Position = (278.1, 483.4) = 17 4 6.53 78 39 43.8
  Extent = 26.2 (26.1-52.3)", rotation angle = 0
  Source counts = 375.4 +/- 27.7
  Background counts = 391.8
  Rate = 0.04 +/- 0.003
[Thu Jun 13 13:40:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 13:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 13:40:28 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 13:40:28 2013] Source does appear to be extended
[Thu Jun 13 13:40:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 13:40:28 2013] Source is confused with source 12
[Thu Jun 13 14:58:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 14:58:33 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 14:58:33 2013] Initial guess for spatial extent in simple fitting = 26.17"
[Thu Jun 13 14:58:33 2013] source mask rpix=6.0, npix_max = 169, mask sum = 150, frac = 0.883
[Thu Jun 13 14:58:33 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 26.17"
[Thu Jun 13 16:43:46 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src26.ximg exists
[Thu Jun 13 16:43:46 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src26_1.ximg exists
[Thu Jun 13 16:43:46 2013] Fit fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src26 appears to have run properly
[Thu Jun 13 16:43:46 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Thu Jun 13 16:43:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu Jun 13 16:43:46 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Thu Jun 13 16:43:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src26.csv
[Thu Jun 13 16:43:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src26_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src26.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:43:57 2013] Warning, spatial fit 26 centroid is now closest to src. 11
[Thu Jun 13 16:43:57 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:43:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:43:57 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 16:43:57 2013] Source does appear to be extended
[Thu Jun 13 16:43:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:06:39 2013] XMMSAS src. selection expression = ellipse(24150.278000, 42009.920000, 1569.996045, 1569.996045, 0.000000, X, Y)
[Thu Jun 13 17:06:39 2013] Writing source region out to fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src7_src.reg
[Thu Jun 13 17:06:39 2013] Extracting stamp from image fullrun_mos2_xmm0112950501_pi300-10000_cl_sm2.00.img.gz, (188, 393) - (368, 574)
[Thu Jun 13 17:06:39 2013] XMMSAS bgd. selection expression = annulus(24150.278000, 42009.920000, 2616.660075, 5233.320151, X, Y) && !ellipse(27873.481995, 41357.143860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27941.076000, 41951.522000, 4013.440115, 4013.440115, 0.000000, X, Y) && !ellipse(28660.060974, 41719.345612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29048.052000, 40285.036000, 3950.496114, 2113.536061, 21.490300, X, Y) && !ellipse(27346.835693, 41537.080505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26794.526000, 39941.876000, 2006.720058, 2006.720058, 0.000000, X, Y) && !ellipse(23679.863220, 41729.639160, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23837.278000, 40139.848000, 2024.816058, 2024.816058, 0.000000, X, Y) && !ellipse(27704.230400, 42573.102600, 1162.016033, 686.929620, 50.566300, X, Y) && !ellipse(24853.120667, 42103.939880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.445648, 40930.440826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22957.026184, 41512.224121, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.986000, 39188.570000, 1975.248057, 1975.248057, 0.000000, X, Y) && !ellipse(22587.716919, 41313.373047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25240.154907, 41705.000488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24754.984000, 41908.271000, 4186.656120, 1411.376041, 356.428720, X, Y) && !ellipse(25281.464508, 40865.153656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.154846, 40124.750946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26098.045319, 40953.072296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26393.824800, 40294.424000, 2014.320058, 251.790407, 339.407400, X, Y) && !ellipse(29660.311800, 41522.108800, 2047.992059, 776.826422, 22.605900, X, Y)
[Thu Jun 13 17:06:39 2013] Writing fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src7.gif
[Thu Jun 13 17:16:19 2013] Mean detx,y = (-7834.28, -14454.85) 
[Thu Jun 13 17:16:20 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:16:48 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:16:48 2013] Setting source spectrum file to fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Thu Jun 13 17:16:48 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Thu Jun 13 17:51:34 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:51:34 2013] Total counts from fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 1841.00
[Thu Jun 13 17:51:34 2013] Total counts from fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src7_bgd.pi.gz = 5336.00
[Thu Jun 13 17:51:34 2013] Got source and background scale factors 4745735.000000, 14449299.000000
[Thu Jun 13 17:51:34 2013] User source parameters:
  Position = (278.1, 483.4) = 17 4 6.53 78 39 43.8
  Extent = 26.2 (26.1-52.3)", rotation angle = 0
  Source aperture counts = 88.4 +/- 43.9
  Background aperture counts = 1752.6
  Rate = 0.009 +/- 0.004

[Thu Jun 13 17:51:35 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:51:35 2013] Using photon index=1.80, rate=0.0373, arf fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src7.arf
[Thu Jun 13 17:51:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:51:35 2013] Updating source flux to 1.1e-12
[Thu Jun 13 17:51:38 2013] Flag c found in src. 7 procflags, skipping spectral fitting
[Thu Jun 13 17:51:44 2013] xmm0112950501/analysis//spectral/fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete