[Thu Jun 13 10:25:58 2013] Detection parameters:
  Position = (320.6, 487.9) = 17 3 3.88 78 40 3.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.4 +/- 20.2
  Background counts = 78.6
  Rate = 0.006 +/- 0.001

[Thu Jun 13 10:25:58 2013] Off-axis axis estimate = 13.83'
[Thu Jun 13 11:49:28 2013] Using EEF radius (= 13.34 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 11:49:28 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu Jun 13 11:49:28 2013] Initial guess for spatial extent in simple fitting = 13.34"
[Thu Jun 13 11:49:28 2013] source mask rpix=3.1, npix_max = 50, mask sum = 46, frac = 0.904
[Thu Jun 13 11:49:28 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 13.34"
[Thu Jun 13 13:40:13 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun 13 13:40:13 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun 13 13:40:13 2013] Fit fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src15 appears to have run properly
[Thu Jun 13 13:40:13 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun 13 13:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 13 13:40:13 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun 13 13:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 13 13:40:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:40:28 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 31 at 11.145275 pixels away
[Thu Jun 13 13:40:28 2013] Source 31 is offset by -5.319749 and -3.014452 pixels which is larger than
2 X fitted extent = 1.490212 x 1.490212, not incorporating fit results
[Thu Jun 13 13:40:28 2013] Spatial fit model total counts = 625.133000, observed total counts = 589.000000
[Thu Jun 13 13:40:28 2013] Offset between fit and detection position for source 31 = 2.561471 pixels
[Thu Jun 13 13:40:28 2013] 491.988000 total counts/ 379.399000 bgd. counts: snr = 5.780267
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 2.561471 pixels
  Position = (319.0, 489.9) = 17 3 6.25 78 40 12.0
  Extent = 14.5 (11.4-25.1)" x 8.6 (5.3-13.4)", rotation angle = 51 (7-85) degrees
  Source counts = 112.6 +/- 22.2
  Background counts = 379.4
  Rate = 0.01 +/- 0.002
[Thu Jun 13 13:40:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 13:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 13:40:28 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 13:40:28 2013] Source does appear to be extended
[Thu Jun 13 13:40:28 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.85
[Thu Jun 13 14:58:33 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Jun 13 14:58:33 2013] Initial guess for spatial extent in simple fitting = 11.56"
[Thu Jun 13 14:58:33 2013] source mask rpix=2.7, npix_max = 39, mask sum = 35, frac = 0.878
[Thu Jun 13 14:58:33 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 11.56"
[Thu Jun 13 16:43:45 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun 13 16:43:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src13.csv
[Thu Jun 13 16:43:45 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun 13 16:43:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src13.csv
[Thu Jun 13 16:43:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:43:46 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 13 16:43:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Jun 13 16:43:46 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 13 16:43:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Jun 13 16:43:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:43:57 2013] Warning, spatial fit 13 centroid is now closest to src. 16
[Thu Jun 13 16:43:57 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:43:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:43:57 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 16:43:57 2013] Source does appear to be extended
[Thu Jun 13 16:43:57 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.85
[Thu Jun 13 16:43:57 2013] Source is confused with source 4
[Thu Jun 13 16:43:57 2013] Source is confused with source 24
[Thu Jun 13 16:43:57 2013] Source is confused with source 11
[Thu Jun 13 17:06:38 2013] XMMSAS src. selection expression = ellipse(27704.230400, 42573.102600, 871.512025, 515.197215, 50.566300, X, Y)
[Thu Jun 13 17:06:38 2013] Writing source region out to fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src31_src.reg
[Thu Jun 13 17:06:38 2013] Extracting stamp from image fullrun_mos2_xmm0112950501_pi300-10000_cl_sm2.00.img.gz, (269, 440) - (369, 540)
[Thu Jun 13 17:06:38 2013] XMMSAS bgd. selection expression = annulus(27704.230400, 42573.102600, 1452.520042, 2905.040084, X, Y) && !ellipse(27873.481995, 41357.143860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27941.076000, 41951.522000, 4013.440115, 4013.440115, 0.000000, X, Y) && !ellipse(28660.060974, 41719.345612, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29048.052000, 40285.036000, 3950.496114, 2113.536061, 21.490300, X, Y) && !ellipse(27346.835693, 41537.080505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26794.526000, 39941.876000, 2006.720058, 2006.720058, 0.000000, X, Y) && !ellipse(23837.278000, 40139.848000, 2024.816058, 2024.816058, 0.000000, X, Y) && !ellipse(24853.120667, 42103.939880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26799.445648, 40930.440826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.986000, 39188.570000, 1975.248057, 1975.248057, 0.000000, X, Y) && !ellipse(25240.154907, 41705.000488, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24754.984000, 41908.271000, 4186.656120, 1411.376041, 356.428720, X, Y) && !ellipse(25281.464508, 40865.153656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29879.154846, 40124.750946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26098.045319, 40953.072296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26393.824800, 40294.424000, 2014.320058, 251.790407, 339.407400, X, Y) && !ellipse(24150.278000, 42009.920000, 2093.328060, 2093.328060, 0.000000, X, Y) && !ellipse(29660.311800, 41522.108800, 2047.992059, 776.826422, 22.605900, X, Y)
[Thu Jun 13 17:06:38 2013] Writing fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src31.gif
[Thu Jun 13 17:11:30 2013] Mean detx,y = (-5185.32, -16853.78) 
[Thu Jun 13 17:11:31 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:11:46 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:11:46 2013] Setting source spectrum file to fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Thu Jun 13 17:11:46 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Thu Jun 13 17:51:32 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:51:32 2013] Total counts from fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src31_src_b10.pi.gz = 252.00
[Thu Jun 13 17:51:32 2013] Total counts from fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src31_bgd.pi.gz = 0.00
[Thu Jun 13 17:51:32 2013] Got source and background scale factors 771640.000000, 0.000000
[Thu Jun 13 17:51:32 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu Jun 13 17:51:34 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:51:34 2013] Using photon index=1.80, rate=0.0112, arf fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src31.arf
[Thu Jun 13 17:51:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:51:34 2013] Updating source flux to 4e-13
[Thu Jun 13 17:51:38 2013] Flag b found in src. 31 procflags, skipping spectral fitting
[Thu Jun 13 17:51:38 2013] Flag c found in src. 31 procflags, skipping spectral fitting
[Thu Jun 13 17:51:44 2013] xmm0112950501/analysis//spectral/fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete