[Thu Jun 13 10:25:58 2013] Detection parameters:
  Position = (330.0, 480.1) = 17 2 50.08 78 39 27.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.6 +/- 23.5
  Background counts = 79.6
  Rate = 0.008 +/- 0.001

[Thu Jun 13 10:25:58 2013] Off-axis axis estimate = 13.37'
[Thu Jun 13 11:49:28 2013] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 11:49:28 2013] Initial guess for spatial extent in simple fitting = 13.11"
[Thu Jun 13 11:49:28 2013] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.931
[Thu Jun 13 11:49:28 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 13.11"
[Thu Jun 13 13:40:12 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src7.ximg exists
[Thu Jun 13 13:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 13:40:12 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu Jun 13 13:40:12 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src7.csv
[Thu Jun 13 13:40:12 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:40:13 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu Jun 13 13:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 13 13:40:13 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu Jun 13 13:40:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu Jun 13 13:40:13 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:40:28 2013] Warning, spatial fit 7 centroid is now closest to src. 4
[Thu Jun 13 13:40:28 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 13:40:28 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 13:40:28 2013] Assessing source extent using major
[Thu Jun 13 13:40:28 2013] Source does appear to be extended
[Thu Jun 13 13:40:28 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 13:40:28 2013] Source is confused with source 4
[Thu Jun 13 14:58:33 2013] Using EEF radius (= 13.11 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 14:58:33 2013] Initial guess for spatial extent in simple fitting = 13.11"
[Thu Jun 13 14:58:33 2013] source mask rpix=3.0, npix_max = 49, mask sum = 46, frac = 0.931
[Thu Jun 13 14:58:33 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 13.11"
[Thu Jun 13 16:43:45 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 13 16:43:45 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 13 16:43:45 2013] Fit fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_src5 appears to have run properly
[Thu Jun 13 16:43:46 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 13 16:43:46 2013] fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 13 16:43:46 2013] Fit fullrun_mos2_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Thu Jun 13 16:43:57 2013] Warning, spatial fit 5 centroid is now closest to src. 4
[Thu Jun 13 16:43:57 2013] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 16.821410 pixels away
[Thu Jun 13 16:43:57 2013] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 2 at 10.947927 pixels away
[Thu Jun 13 16:43:57 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:43:57 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:43:57 2013] Assessing source extent using major
[Thu Jun 13 16:43:57 2013] Source does appear to be extended
[Thu Jun 13 16:43:57 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 17:06:38 2013] XMMSAS src. selection expression = ellipse(28660.060974, 41719.345612, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 17:06:38 2013] Writing source region out to fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 17:06:38 2013] Extracting stamp from image fullrun_mos2_xmm0112950501_pi300-10000_cl_sm2.00.img.gz, (292, 443) - (367, 518)
[Thu Jun 13 17:06:38 2013] XMMSAS bgd. selection expression = annulus(28660.060974, 41719.345612, 1087.500000, 2175.000000, X, Y) && !ellipse(27873.481995, 41357.143860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27941.076000, 41951.522000, 4013.440115, 4013.440115, 0.000000, X, Y) && !ellipse(29048.052000, 40285.036000, 3950.496114, 2113.536061, 21.490300, X, Y) && !ellipse(27346.835693, 41537.080505, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26794.526000, 39941.876000, 2006.720058, 2006.720058, 0.000000, X, Y) && !ellipse(27704.230400, 42573.102600, 1162.016033, 686.929620, 50.566300, X, Y) && !ellipse(26799.445648, 40930.440826, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29917.986000, 39188.570000, 1975.248057, 1975.248057, 0.000000, X, Y) && !ellipse(24754.984000, 41908.271000, 4186.656120, 1411.376041, 356.428720, X, Y) && !ellipse(29879.154846, 40124.750946, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26098.045319, 40953.072296, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26393.824800, 40294.424000, 2014.320058, 251.790407, 339.407400, X, Y) && !ellipse(29660.311800, 41522.108800, 2047.992059, 776.826422, 22.605900, X, Y)
[Thu Jun 13 17:06:38 2013] Writing fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 17:08:41 2013] Mean detx,y = (-4032.45, -16750.54) 
[Thu Jun 13 17:08:42 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 17:08:50 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 17:08:50 2013] Setting source spectrum file to fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 17:08:50 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 17:21:45 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 17:21:45 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:51:31 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:51:31 2013] Total counts from fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 436.00
[Thu Jun 13 17:51:31 2013] Total counts from fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 0.00
[Thu Jun 13 17:51:31 2013] Got source and background scale factors 1223352.000000, 0.000000
[Thu Jun 13 17:51:31 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu Jun 13 17:51:34 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:51:34 2013] Using photon index=1.80, rate=0.00766, arf fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 17:51:34 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:51:34 2013] Updating source flux to 2.5e-13
[Thu Jun 13 17:51:38 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:51:44 2013] xmm0112950501/analysis//spectral/fullrun_mos2_xmm0112950501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete