[Thu Jun 13 10:25:33 2013] Detection parameters:
  Position = (328.2, 477.0) = 17 2 52.71 78 39 19.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 155.7 +/- 21.1
  Background counts = 94.4
  Rate = 0.008 +/- 0.001

[Thu Jun 13 10:25:33 2013] Off-axis axis estimate = 13.13'
[Thu Jun 13 10:34:07 2013] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 10:34:07 2013] Initial guess for spatial extent in simple fitting = 12.99"
[Thu Jun 13 10:34:07 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.864
[Thu Jun 13 10:34:07 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 12.99"
[Thu Jun 13 11:49:27 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src6.ximg exists
[Thu Jun 13 11:49:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 11:49:27 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src6_1.ximg exists
[Thu Jun 13 11:49:27 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src6.csv
[Thu Jun 13 11:49:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 11:49:28 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Thu Jun 13 11:49:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 11:49:28 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Thu Jun 13 11:49:28 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src6.csv
[Thu Jun 13 11:49:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:40:21 2013] Warning, spatial fit 6 centroid is now closest to src. 8
[Thu Jun 13 13:40:21 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 13:40:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 13:40:21 2013] Assessing source extent using major
[Thu Jun 13 13:40:21 2013] Source does appear to be extended
[Thu Jun 13 13:40:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 13:40:21 2013] Source is confused with source 10
[Thu Jun 13 13:44:38 2013] Using EEF radius (= 12.99 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 13:44:38 2013] Initial guess for spatial extent in simple fitting = 12.99"
[Thu Jun 13 13:44:38 2013] source mask rpix=3.0, npix_max = 48, mask sum = 42, frac = 0.864
[Thu Jun 13 13:44:38 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 12.99"
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src5.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src5.csv
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src5.csv
[Thu Jun 13 14:58:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu Jun 13 14:58:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:43:52 2013] Warning, spatial fit 5 centroid is now closest to src. 16
[Thu Jun 13 16:43:52 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:43:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:43:52 2013] Assessing source extent using major
[Thu Jun 13 16:43:52 2013] Source does appear to be extended
[Thu Jun 13 16:43:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:45:52 2013] XMMSAS src. selection expression = ellipse(28505.461273, 41451.554047, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 16:45:52 2013] Writing source region out to fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src2_src.reg
[Thu Jun 13 16:45:52 2013] Extracting stamp from image fullrun_mos1_xmm0112950501_pi300-10000_cl_sm2.00.img.gz, (291, 440) - (366, 515)
[Thu Jun 13 16:45:52 2013] XMMSAS bgd. selection expression = annulus(28505.461273, 41451.554047, 1087.500000, 2175.000000, X, Y) && !ellipse(28191.028809, 40836.877594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26676.220600, 41140.936000, 1048.096030, 1048.096030, 0.000000, X, Y) && !ellipse(28572.489600, 40457.581200, 3997.680115, 1263.544036, 39.071300, X, Y) && !ellipse(26045.382812, 41300.984680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27571.432000, 41266.684000, 2034.832059, 1050.272030, 48.199500, X, Y) && !ellipse(26532.226400, 41949.810000, 2059.272059, 2059.272059, 0.000000, X, Y) && !ellipse(29785.038000, 39420.186000, 1634.584047, 1634.584047, 0.000000, X, Y) && !ellipse(26507.541107, 40791.373047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29439.391724, 41160.262817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26011.032043, 40512.411774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30486.845917, 40420.245087, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 16:45:52 2013] Writing fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src2.gif
[Thu Jun 13 16:46:13 2013] Mean detx,y = (-16112.18, 3694.49) 
[Thu Jun 13 16:46:14 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:46:26 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:46:26 2013] Setting source spectrum file to fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Jun 13 16:46:26 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Jun 13 16:52:49 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Jun 13 16:52:49 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:51:28 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:51:28 2013] Total counts from fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 310.00
[Thu Jun 13 17:51:28 2013] Total counts from fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src2_bgd.pi.gz = 0.00
[Thu Jun 13 17:51:28 2013] Got source and background scale factors 978606.000000, 0.000000
[Thu Jun 13 17:51:28 2013] Background scale factor is not positive, halting re-assessment of this source
[Thu Jun 13 17:51:30 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:51:30 2013] Using photon index=1.80, rate=0.00787, arf fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src2.arf
[Thu Jun 13 17:51:30 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:51:30 2013] Updating source flux to 2.7e-13
[Thu Jun 13 17:51:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:51:38 2013] xmm0112950501/analysis//spectral/fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete