[Thu Jun 13 10:25:33 2013] Detection parameters:
  Position = (300.6, 480.7) = 17 3 33.35 78 39 33.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.5 +/- 20.2
  Background counts = 107.3
  Rate = 0.005 +/- 0.001

[Thu Jun 13 10:25:33 2013] Off-axis axis estimate = 13.21'
[Thu Jun 13 10:34:07 2013] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 10:34:07 2013] Initial guess for spatial extent in simple fitting = 13.03"
[Thu Jun 13 10:34:07 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Thu Jun 13 10:34:07 2013] Giving source the simple spatial ID 15 for pass 0, mean size = 13.03"
[Thu Jun 13 11:49:27 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src15.ximg exists
[Thu Jun 13 11:49:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src15.csv
[Thu Jun 13 11:49:27 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src15_1.ximg exists
[Thu Jun 13 11:49:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src15.csv
[Thu Jun 13 11:49:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 11:49:28 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Thu Jun 13 11:49:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 13 11:49:28 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Thu Jun 13 11:49:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15.csv
[Thu Jun 13 11:49:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:40:21 2013] Warning, spatial fit 15 centroid is now closest to src. 6
[Thu Jun 13 13:40:21 2013] Source 18 is offset by 0.990641 and 2.160221 pixels which is larger than
2 X fitted extent = 1.438018 x 1.438018, not incorporating fit results
[Thu Jun 13 13:40:21 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 13:40:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 13:40:21 2013] Assessing source extent using major
[Thu Jun 13 13:40:21 2013] Source does appear to be extended
[Thu Jun 13 13:40:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 13:40:21 2013] Source is confused with source 10
[Thu Jun 13 13:44:38 2013] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 13:44:38 2013] Initial guess for spatial extent in simple fitting = 13.03"
[Thu Jun 13 13:44:38 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Thu Jun 13 13:44:38 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 13.03"
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src13.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src13.csv
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src13_1.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src13.csv
[Thu Jun 13 14:58:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13.csv
[Thu Jun 13 14:58:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:43:52 2013] Spatial fit model total counts = 780.627000, observed total counts = 756.000000
[Thu Jun 13 16:43:52 2013] Offset between fit and detection position for source 18 = 5.310140 pixels
[Thu Jun 13 16:43:52 2013] Warning, changing simple spatial fit ID from 13 to 6
[Thu Jun 13 16:43:52 2013] 378.660000 total counts/ 219.345000 bgd. counts: snr = 10.757040
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 5.310140 pixels
  Position = (305.5, 482.7) = 17 3 26.14 78 39 40.9
  Extent = 25.7 (25.5-51.5)", rotation angle = 0
  Source counts = 159.3 +/- 19.5
  Background counts = 219.3
  Rate = 0.02 +/- 0.002
[Thu Jun 13 16:43:52 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:43:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:43:52 2013] Assessing source extent using major axis lower bound
[Thu Jun 13 16:43:52 2013] Source does appear to be extended
[Thu Jun 13 16:43:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:45:52 2013] XMMSAS src. selection expression = ellipse(26532.226400, 41949.810000, 1544.454044, 1544.454044, 0.000000, X, Y)
[Thu Jun 13 16:45:52 2013] Writing source region out to fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src18_src.reg
[Thu Jun 13 16:45:52 2013] Extracting stamp from image fullrun_mos1_xmm0112950501_pi300-10000_cl_sm2.00.img.gz, (217, 394) - (394, 572)
[Thu Jun 13 16:45:52 2013] XMMSAS bgd. selection expression = annulus(26532.226400, 41949.810000, 2574.090074, 5148.180148, X, Y) && !ellipse(28191.028809, 40836.877594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28505.461273, 41451.554047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26676.220600, 41140.936000, 1048.096030, 1048.096030, 0.000000, X, Y) && !ellipse(28572.489600, 40457.581200, 3997.680115, 1263.544036, 39.071300, X, Y) && !ellipse(26045.382812, 41300.984680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20910.905000, 40891.133200, 2077.552060, 259.693607, 324.509657, X, Y) && !ellipse(27571.432000, 41266.684000, 2034.832059, 1050.272030, 48.199500, X, Y) && !ellipse(29785.038000, 39420.186000, 1634.584047, 1634.584047, 0.000000, X, Y) && !ellipse(26507.541107, 40791.373047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29439.391724, 41160.262817, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26011.032043, 40512.411774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30486.845917, 40420.245087, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 16:45:52 2013] Writing fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src18.gif
[Thu Jun 13 16:50:30 2013] Mean detx,y = (-15286.39, 5263.64) 
[Thu Jun 13 16:50:31 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:51:14 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:51:14 2013] Setting source spectrum file to fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Jun 13 16:51:14 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Jun 13 17:51:29 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:51:29 2013] Total counts from fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 1160.00
[Thu Jun 13 17:51:30 2013] Total counts from fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src18_bgd.pi.gz = 3871.00
[Thu Jun 13 17:51:30 2013] Got source and background scale factors 3476092.000000, 12362651.000000
[Thu Jun 13 17:51:30 2013] User source parameters:
  Position = (305.5, 482.7) = 17 3 26.14 78 39 40.9
  Extent = 25.7 (25.5-51.5)", rotation angle = 0
  Source aperture counts = 71.6 +/- 35.1
  Background aperture counts = 1088.4
  Rate = 0.008 +/- 0.004

[Thu Jun 13 17:51:31 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:51:31 2013] Using photon index=1.80, rate=0.0179, arf fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src18.arf
[Thu Jun 13 17:51:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:51:31 2013] Updating source flux to 6.1e-13
[Thu Jun 13 17:51:35 2013] Flag b found in src. 18 procflags, skipping spectral fitting
[Thu Jun 13 17:51:35 2013] Flag c found in src. 18 procflags, skipping spectral fitting
[Thu Jun 13 17:51:38 2013] xmm0112950501/analysis//spectral/fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete