[Thu Jun 13 10:25:33 2013] Detection parameters:
  Position = (338.9, 473.7) = 17 2 36.90 78 39 4.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 93.2 +/- 18.5
  Background counts = 90.6
  Rate = 0.005 +/- 0.0009

[Thu Jun 13 10:25:33 2013] Off-axis axis estimate = 13.04'
[Thu Jun 13 10:34:07 2013] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 10:34:07 2013] Initial guess for spatial extent in simple fitting = 12.95"
[Thu Jun 13 10:34:07 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Thu Jun 13 10:34:07 2013] Giving source the simple spatial ID 18 for pass 0, mean size = 12.95"
[Thu Jun 13 11:49:27 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src18.ximg exists
[Thu Jun 13 11:49:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src18.csv
[Thu Jun 13 11:49:27 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src18_1.ximg exists
[Thu Jun 13 11:49:27 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src18.csv
[Thu Jun 13 11:49:27 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 11:49:28 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Thu Jun 13 11:49:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 13 11:49:28 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Thu Jun 13 11:49:28 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src18.csv
[Thu Jun 13 11:49:28 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass0_tfrozen_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 13:40:21 2013] Source 11 is offset by 3.907284 and -3.370060 pixels which is larger than
2 X fitted extent = 1.441752 x 1.441752, not incorporating fit results
[Thu Jun 13 13:40:21 2013] Warning, spatial fit 18 centroid is now closest to src. 8
[Thu Jun 13 13:40:21 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 13:40:21 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 13:40:21 2013] Assessing source extent using major
[Thu Jun 13 13:40:21 2013] Source does appear to be extended
[Thu Jun 13 13:40:21 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 13:40:21 2013] Source is confused with source 8
[Thu Jun 13 13:44:38 2013] Using EEF radius (= 12.95 ")to estimate initial spatial extent for simple fitting
[Thu Jun 13 13:44:38 2013] Initial guess for spatial extent in simple fitting = 12.95"
[Thu Jun 13 13:44:38 2013] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.014
[Thu Jun 13 13:44:38 2013] Giving source the simple spatial ID 16 for pass 1, mean size = 12.95"
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src16.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src16.csv
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src16.csv
[Thu Jun 13 14:58:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jun 13 14:58:33 2013] fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Jun 13 14:58:33 2013] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src16.csv
[Thu Jun 13 14:58:33 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950501_pi300-10000_cl_pass1_tfrozen_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Jun 13 16:43:52 2013] Warning: source 16 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 17.004492 pixels away
[Thu Jun 13 16:43:52 2013] Vigneting correction estimate = 1.000000
[Thu Jun 13 16:43:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Jun 13 16:43:52 2013] Assessing source extent using major
[Thu Jun 13 16:43:52 2013] Source does appear to be extended
[Thu Jun 13 16:43:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Jun 13 16:45:52 2013] XMMSAS src. selection expression = ellipse(29439.391724, 41160.262817, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Jun 13 16:45:52 2013] Writing source region out to fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src11_src.reg
[Thu Jun 13 16:45:52 2013] Extracting stamp from image fullrun_mos1_xmm0112950501_pi300-10000_cl_sm2.00.img.gz, (301, 436) - (376, 511)
[Thu Jun 13 16:45:52 2013] XMMSAS bgd. selection expression = annulus(29439.391724, 41160.262817, 1087.500000, 2175.000000, X, Y) && !ellipse(28191.028809, 40836.877594, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28505.461273, 41451.554047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26676.220600, 41140.936000, 1048.096030, 1048.096030, 0.000000, X, Y) && !ellipse(28572.489600, 40457.581200, 3997.680115, 1263.544036, 39.071300, X, Y) && !ellipse(27571.432000, 41266.684000, 2034.832059, 1050.272030, 48.199500, X, Y) && !ellipse(26532.226400, 41949.810000, 2059.272059, 2059.272059, 0.000000, X, Y) && !ellipse(29785.038000, 39420.186000, 1634.584047, 1634.584047, 0.000000, X, Y) && !ellipse(26507.541107, 40791.373047, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30486.845917, 40420.245087, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Jun 13 16:45:52 2013] Writing fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src11.gif
[Thu Jun 13 16:51:56 2013] Mean detx,y = (-16334.02, 2804.19) 
[Thu Jun 13 16:51:57 2013] Setting backscal keywords in source and bgd. spectrum
[Thu Jun 13 16:52:10 2013] Binned source spectrum to 10 counts/bin
[Thu Jun 13 16:52:10 2013] Setting source spectrum file to fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Jun 13 16:52:10 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Jun 13 17:06:22 2013] Not generating rmf since there are only 93 counts
[Thu Jun 13 17:06:22 2013] rmf not generated due to insufficient counts
[Thu Jun 13 17:51:30 2013] Updating aperture counts using extracted products
[Thu Jun 13 17:51:30 2013] Total counts from fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 247.00
[Thu Jun 13 17:51:30 2013] Total counts from fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src11_bgd.pi.gz = 8.00
[Thu Jun 13 17:51:30 2013] Got source and background scale factors 1022562.000000, 56321.000000
[Thu Jun 13 17:51:30 2013] User source parameters:
  Position = (338.9, 473.7) = 17 2 36.90 78 39 4.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 101.8 +/- 16.7
  Background aperture counts = 145.2
  Rate = 0.01 +/- 0.002

[Thu Jun 13 17:51:30 2013] Updating counts from extracted products
[Thu Jun 13 17:51:30 2013] Set source signif. to 101.75/12.05 = 8.44
[Thu Jun 13 17:51:31 2013] Calculating source flux in energy range 0.30-8.00
[Thu Jun 13 17:51:31 2013] Using photon index=1.80, rate=0.0114, arf fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src11.arf
[Thu Jun 13 17:51:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Jun 13 17:51:31 2013] Updating source flux to 3.7e-13
[Thu Jun 13 17:51:35 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Jun 13 17:51:38 2013] xmm0112950501/analysis//spectral/fullrun_mos1_xmm0112950501_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete