[Tue Jul 31 12:49:15 2012] Detection parameters:
  Position = (197.8, 393.1) = 9 9 21.82 -9 40 33.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.5 +/- 25.4
  Background counts = 230.5
  Rate = 0.01 +/- 0.002

[Tue Jul 31 12:49:15 2012] Off-axis axis estimate = 10.01'
[Tue Jul 31 12:53:22 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 12:53:22 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Tue Jul 31 12:53:22 2012] source mask rpix=2.6, npix_max = 39, mask sum = 34, frac = 0.868
[Tue Jul 31 12:53:22 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 11.44"
[Tue Jul 31 16:12:32 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src31.ximg exists
[Tue Jul 31 16:12:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src31.csv
[Tue Jul 31 16:12:32 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Jul 31 16:12:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src31.csv
[Tue Jul 31 16:12:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 16:12:33 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Jul 31 16:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Jul 31 16:12:33 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Jul 31 16:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src31.csv
[Tue Jul 31 16:12:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 21:17:38 2012] Warning, spatial fit 31 centroid is now closest to src. 27
[Tue Jul 31 21:17:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 21:17:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 21:17:38 2012] Assessing source extent using major
[Tue Jul 31 21:17:38 2012] Source does appear to be extended
[Tue Jul 31 21:17:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 21:17:38 2012] Source is confused with source 28
[Tue Jul 31 21:18:04 2012] Using EEF radius (= 11.44 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 21:18:04 2012] Initial guess for spatial extent in simple fitting = 11.44"
[Tue Jul 31 21:18:04 2012] source mask rpix=2.6, npix_max = 39, mask sum = 34, frac = 0.868
[Tue Jul 31 21:18:04 2012] Giving source the simple spatial ID 29 for pass 1, mean size = 11.44"
[Tue Jul 31 23:33:14 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_src29.ximg exists
[Tue Jul 31 23:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_src29.csv
[Tue Jul 31 23:33:14 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_src29_1.ximg exists
[Tue Jul 31 23:33:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_src29.csv
[Tue Jul 31 23:33:14 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 23:33:15 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src29.ximg exists
[Tue Jul 31 23:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Jul 31 23:33:15 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg exists
[Tue Jul 31 23:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src29.csv
[Tue Jul 31 23:33:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src29_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 03:07:01 2012] Warning, spatial fit 29 centroid is now closest to src. 29
[Wed Aug  1 03:07:01 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 03:07:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 03:07:01 2012] Assessing source extent using major
[Wed Aug  1 03:07:01 2012] Source does appear to be extended
[Wed Aug  1 03:07:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 03:07:23 2012] XMMSAS src. selection expression = ellipse(17161.976044, 34148.710114, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  1 03:07:23 2012] Writing source region out to fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src32_src.reg
[Wed Aug  1 03:07:23 2012] Extracting stamp from image fullrun_pn_xmm0112950401_pi300-10000_cl_sm2.00.img.gz, (160, 356) - (235, 431)
[Wed Aug  1 03:07:23 2012] XMMSAS bgd. selection expression = annulus(17161.976044, 34148.710114, 1087.500000, 2175.000000, X, Y) && !ellipse(16904.427582, 33539.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17860.944366, 33610.854279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18378.181244, 33175.418854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19461.937653, 31193.508514, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18167.711761, 34040.297302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16389.102325, 33705.179504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15995.884521, 34570.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16764.741180, 35779.665405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16753.300659, 35185.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17008.297638, 34748.032532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15505.966568, 35076.892426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15154.096863, 34317.203583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15873.803619, 33991.991699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17550.588699, 33184.546844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16173.993179, 33174.327637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19777.967224, 32948.619100, 1688.096049, 599.752649, 269.612222, X, Y) && !ellipse(19044.472794, 33032.870331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17906.847168, 32678.899170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18690.927765, 32098.621277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17930.999969, 32242.492004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15712.384000, 30979.921200, 1524.624044, 489.678414, 329.296260, X, Y)
[Wed Aug  1 03:07:23 2012] Writing fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src32.gif
[Wed Aug  1 03:21:02 2012] Mean detx,y = (-7043.84, -8878.43) 
[Wed Aug  1 03:21:04 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 03:21:25 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 03:21:25 2012] Setting source spectrum file to fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Aug  1 03:21:25 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src32_bgd.pi.gz
[Wed Aug  1 03:42:17 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  1 03:42:17 2012] rmf not generated due to insufficient counts
[Wed Aug  1 04:49:41 2012] Updating aperture counts using extracted products
[Wed Aug  1 04:49:42 2012] Error reading totcts from fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src32_src_b10.pi.gz
[Wed Aug  1 04:49:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 04:49:42 2012] Using photon index=1.80, rate=0.0124, arf fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src32.arf
[Wed Aug  1 04:49:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 04:49:42 2012] Updating source flux to 8.9e-14
[Wed Aug  1 04:51:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting