[Tue Jul 31 12:49:14 2012] Detection parameters:
  Position = (196.1, 400.0) = 9 9 22.34 -9 40 3.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.3 +/- 24.9
  Background counts = 213.3
  Rate = 0.01 +/- 0.002

[Tue Jul 31 12:49:15 2012] Off-axis axis estimate = 10.45'
[Tue Jul 31 12:53:22 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 12:53:22 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Tue Jul 31 12:53:22 2012] source mask rpix=2.7, npix_max = 40, mask sum = 35, frac = 0.866
[Tue Jul 31 12:53:22 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 11.66"
[Tue Jul 31 16:12:32 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src27.ximg exists
[Tue Jul 31 16:12:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src27.csv
[Tue Jul 31 16:12:32 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src27_1.ximg exists
[Tue Jul 31 16:12:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src27.csv
[Tue Jul 31 16:12:32 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 16:12:33 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Tue Jul 31 16:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue Jul 31 16:12:33 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Tue Jul 31 16:12:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src27.csv
[Tue Jul 31 16:12:33 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 21:17:38 2012] Source 28 is offset by 0.206892 and 1.797661 pixels which is larger than
2 X fitted extent = 1.463982 x 1.463982, not incorporating fit results
[Tue Jul 31 21:17:38 2012] Source 28 is offset by -7.476349 and -4.128316 pixels which is larger than
2 X fitted extent = 1.573177 x 1.573177, not incorporating fit results
[Tue Jul 31 21:17:38 2012] Warning, spatial fit 27 centroid is now closest to src. 4
[Tue Jul 31 21:17:38 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 21:17:38 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 21:17:38 2012] Assessing source extent using major
[Tue Jul 31 21:17:38 2012] Source does appear to be extended
[Tue Jul 31 21:17:38 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 21:17:38 2012] Source is confused with source 27
[Tue Jul 31 21:17:38 2012] Source is confused with source 32
[Tue Jul 31 21:18:04 2012] Using EEF radius (= 11.66 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 21:18:04 2012] Initial guess for spatial extent in simple fitting = 11.66"
[Tue Jul 31 21:18:04 2012] source mask rpix=2.7, npix_max = 40, mask sum = 35, frac = 0.866
[Tue Jul 31 21:18:04 2012] Giving source the simple spatial ID 25 for pass 1, mean size = 11.66"
[Tue Jul 31 23:33:14 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_src25.ximg exists
[Tue Jul 31 23:33:14 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_src25_1.ximg exists
[Tue Jul 31 23:33:14 2012] Fit fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_src25 appears to have run properly
[Tue Jul 31 23:33:15 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Tue Jul 31 23:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue Jul 31 23:33:15 2012] fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Tue Jul 31 23:33:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src25.csv
[Tue Jul 31 23:33:15 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 03:07:01 2012] Spatial fit model total counts = 3563.590000, observed total counts = 2957.000000
[Wed Aug  1 03:07:01 2012] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 03:07:01 2012] Source 28 is offset by 1.929108 and -1.493327 pixels which is larger than
2 X fitted extent = 1.543802 x 1.543802, not incorporating fit results
[Wed Aug  1 03:07:01 2012] Warning, spatial fit 25 centroid is now closest to src. 26
[Wed Aug  1 03:07:01 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 03:07:01 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 03:07:01 2012] Assessing source extent using major
[Wed Aug  1 03:07:01 2012] Source does appear to be extended
[Wed Aug  1 03:07:01 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 03:07:22 2012] XMMSAS src. selection expression = ellipse(17008.297638, 34748.032532, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  1 03:07:22 2012] Writing source region out to fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src28_src.reg
[Wed Aug  1 03:07:22 2012] Extracting stamp from image fullrun_pn_xmm0112950401_pi300-10000_cl_sm2.00.img.gz, (159, 362) - (234, 437)
[Wed Aug  1 03:07:22 2012] XMMSAS bgd. selection expression = annulus(17008.297638, 34748.032532, 1087.500000, 2175.000000, X, Y) && !ellipse(16904.427582, 33539.601257, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17860.944366, 33610.854279, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18378.181244, 33175.418854, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18167.711761, 34040.297302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16389.102325, 33705.179504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15995.884521, 34570.549133, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16764.741180, 35779.665405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16753.300659, 35185.820312, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15505.966568, 35076.892426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15154.096863, 34317.203583, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17161.976044, 34148.710114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15873.803619, 33991.991699, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17550.588699, 33184.546844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16173.993179, 33174.327637, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19777.967224, 32948.619100, 1688.096049, 599.752649, 269.612222, X, Y) && !ellipse(19044.472794, 33032.870331, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17906.847168, 32678.899170, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18690.927765, 32098.621277, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17930.999969, 32242.492004, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 03:07:22 2012] Writing fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src28.gif
[Wed Aug  1 03:19:45 2012] Mean detx,y = (-7033.90, -9474.43) 
[Wed Aug  1 03:19:48 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 03:20:06 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 03:20:06 2012] Setting source spectrum file to fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Aug  1 03:20:06 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Wed Aug  1 03:41:47 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Aug  1 03:41:47 2012] rmf not generated due to insufficient counts
[Wed Aug  1 04:49:41 2012] Updating aperture counts using extracted products
[Wed Aug  1 04:49:41 2012] Error reading totcts from fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Wed Aug  1 04:49:42 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 04:49:42 2012] Using photon index=1.80, rate=0.0125, arf fullrun_pn_xmm0112950401_pi300-10000_pass1_cl_src28.arf
[Wed Aug  1 04:49:42 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 04:49:42 2012] Updating source flux to 8.3e-14
[Wed Aug  1 04:51:08 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting