[Tue Jul 31 12:50:34 2012] Detection parameters:
  Position = (205.6, 386.0) = 9 9 19.52 -9 41 7.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.3 +/- 21.1
  Background counts = 104.5
  Rate = 0.008 +/- 0.001

[Tue Jul 31 12:50:36 2012] Off-axis axis estimate = 9.25'
[Tue Jul 31 18:46:43 2012] Using EEF radius (= 11.05 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 18:46:43 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 31 18:46:43 2012] Initial guess for spatial extent in simple fitting = 11.05"
[Tue Jul 31 18:46:43 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.973
[Tue Jul 31 18:46:43 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 11.05"
[Tue Jul 31 21:17:25 2012] fullrun_mos2_xmm0112950401_pi300-10000_cl_pass0_src8.ximg exists
[Tue Jul 31 21:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950401_pi300-10000_cl_pass0_src8.csv
[Tue Jul 31 21:17:25 2012] fullrun_mos2_xmm0112950401_pi300-10000_cl_pass0_src8_1.ximg exists
[Tue Jul 31 21:17:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950401_pi300-10000_cl_pass0_src8.csv
[Tue Jul 31 21:17:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950401_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950401_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 21:17:26 2012] fullrun_mos2_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Tue Jul 31 21:17:26 2012] fullrun_mos2_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Tue Jul 31 21:17:26 2012] Fit fullrun_mos2_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Tue Jul 31 21:17:53 2012] Warning, spatial fit 8 centroid is now closest to src. 6
[Tue Jul 31 21:17:53 2012] Spatial fit model total counts = 1629.940000, observed total counts = 1628.000000
[Tue Jul 31 21:17:53 2012] Offset between fit and detection position for source 13 = 1.635755 pixels
[Tue Jul 31 21:17:53 2012] Warning, changing simple spatial fit ID from 8 to 18
[Tue Jul 31 21:17:53 2012] 1577.143000 total counts/ 1236.180000 bgd. counts: snr = 9.697648
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.635755 pixels
  Position = (204.9, 387.5) = 9 9 19.73 -9 41 1.5
  Extent = 22.4 (21.9-22.7)", rotation angle = 0
  Source counts = 341.0 +/- 39.7
  Background counts = 1236.2
  Rate = 0.02 +/- 0.002
[Tue Jul 31 21:17:53 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 21:17:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 21:17:53 2012] Assessing source extent using major axis lower bound
[Tue Jul 31 21:17:53 2012] Source does appear to be extended
[Tue Jul 31 21:17:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 21:17:53 2012] Source is confused with source 35
[Wed Aug  1 01:11:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 01:11:37 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  1 01:11:37 2012] Initial guess for spatial extent in simple fitting = 22.45"
[Wed Aug  1 01:11:37 2012] source mask rpix=5.2, npix_max = 128, mask sum = 132, frac = 1.030
[Wed Aug  1 01:11:37 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 22.45"
[Wed Aug  1 03:06:50 2012] fullrun_mos2_xmm0112950401_pi300-10000_cl_pass1_src7.ximg exists
[Wed Aug  1 03:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950401_pi300-10000_cl_pass1_src7.csv
[Wed Aug  1 03:06:50 2012] fullrun_mos2_xmm0112950401_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Aug  1 03:06:50 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950401_pi300-10000_cl_pass1_src7.csv
[Wed Aug  1 03:06:50 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112950401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112950401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 03:06:50 2012] fullrun_mos2_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Aug  1 03:06:50 2012] fullrun_mos2_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Aug  1 03:06:50 2012] Fit fullrun_mos2_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Wed Aug  1 03:07:11 2012] Warning, spatial fit 7 centroid is now closest to src. 6
[Wed Aug  1 03:07:12 2012] Spatial fit model total counts = 1625.110000, observed total counts = 1628.000000
[Wed Aug  1 03:07:12 2012] Offset between fit and detection position for source 13 = 0.790133 pixels
[Wed Aug  1 03:07:12 2012] Warning, changing simple spatial fit ID from 7 to 16
[Wed Aug  1 03:07:12 2012] 1527.686000 total counts/ 1228.250000 bgd. counts: snr = 8.543988
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 0.790133 pixels
  Position = (204.6, 388.2) = 9 9 19.81 -9 40 58.3
  Extent = 22.7 (22.4-45.4)" x 13.7 (7.7-21.3)", rotation angle = 225 (194-255) degrees
  Source counts = 299.4 +/- 39.1
  Background counts = 1228.2
  Rate = 0.02 +/- 0.002
[Wed Aug  1 03:07:12 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 03:07:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 03:07:12 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 03:07:12 2012] Source does appear to be extended
[Wed Aug  1 03:07:12 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.05
[Wed Aug  1 04:27:22 2012] XMMSAS src. selection expression = ellipse(17755.864000, 33726.746000, 1361.166039, 821.976024, 224.540000, X, Y)
[Wed Aug  1 04:27:22 2012] Writing source region out to fullrun_mos2_xmm0112950401_pi300-10000_pass1_cl_src13_src.reg
[Wed Aug  1 04:27:22 2012] Extracting stamp from image fullrun_mos2_xmm0112950401_pi300-10000_cl_sm2.00.img.gz, (126, 310) - (283, 466)
[Wed Aug  1 04:27:22 2012] XMMSAS bgd. selection expression = annulus(17755.864000, 33726.746000, 2268.610065, 4537.220131, X, Y) && !ellipse(19441.742172, 31208.405884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18169.097687, 30847.316589, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19224.398400, 33756.314600, 502.159214, 502.159214, 0.000000, X, Y) && !ellipse(18835.541901, 32879.776031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16383.859320, 29113.500800, 384.386411, 384.386411, 0.000000, X, Y) && !ellipse(17370.922867, 34046.066681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17748.511841, 34113.435394, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16192.261108, 35025.549469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17578.809006, 32928.291382, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19367.713318, 33137.828949, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16063.713882, 35695.524872, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17956.246643, 32632.048523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16248.607400, 33518.945600, 1265.344036, 1265.344036, 0.000000, X, Y) && !ellipse(16913.139800, 35509.390660, 926.720027, 926.720027, 0.000000, X, Y)
[Wed Aug  1 04:27:22 2012] Writing fullrun_mos2_xmm0112950401_pi300-10000_pass1_cl_src13.gif
[Wed Aug  1 04:29:29 2012] Mean detx,y = (6906.88, 8100.62) 
[Wed Aug  1 04:29:30 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 04:30:02 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 04:30:02 2012] Setting source spectrum file to fullrun_mos2_xmm0112950401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Aug  1 04:30:02 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112950401_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Wed Aug  1 04:49:44 2012] Updating aperture counts using extracted products
[Wed Aug  1 04:49:44 2012] Error reading totcts from fullrun_mos2_xmm0112950401_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Wed Aug  1 04:49:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 04:49:44 2012] Using photon index=1.80, rate=0.0184, arf fullrun_mos2_xmm0112950401_pi300-10000_pass1_cl_src13.arf
[Wed Aug  1 04:49:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 04:49:44 2012] Updating source flux to 3.7e-13
[Wed Aug  1 04:50:31 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Wed Aug  1 04:51:08 2012] Reading fit data from xmm0112950401/analysis//spectral/fullrun_mos2_xmm0112950401_pi300-10000_pass1_cl_src13_pl.csv
[Wed Aug  1 04:51:08 2012] Spectral fit parameter nH value = 1.33948e+21
[Wed Aug  1 04:51:08 2012] Spectral fit parameter PhoIndex value = 1.86035
[Wed Aug  1 04:51:08 2012] Failed to get F(0.3-8.0) from xmm0112950401/analysis//spectral/fullrun_mos2_xmm0112950401_pi300-10000_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Wed Aug  1 04:51:08 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 04:51:08 2012] Using Nh = 1.3e+21, photon index=1.86, rate=0.0184, arf fullrun_mos2_xmm0112950401_pi300-10000_pass1_cl_src13.arf
[Wed Aug  1 04:51:08 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 04:51:08 2012] Updating source flux to 4e-13