[Tue Jul 31 12:49:53 2012] Detection parameters:
  Position = (204.5, 398.2) = 9 9 19.86 -9 40 14.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 84.4 +/- 16.3
  Background counts = 95.5
  Rate = 0.005 +/- 0.001

[Tue Jul 31 12:49:55 2012] Off-axis axis estimate = 9.94'
[Tue Jul 31 16:12:34 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 16:12:34 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Tue Jul 31 16:12:34 2012] source mask rpix=2.6, npix_max = 38, mask sum = 23, frac = 0.591
[Tue Jul 31 16:12:34 2012] Giving source the simple spatial ID 30 for pass 0, mean size = 11.40"
[Tue Jul 31 18:46:42 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src30.ximg exists
[Tue Jul 31 18:46:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src30.csv
[Tue Jul 31 18:46:42 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src30_1.ximg exists
[Tue Jul 31 18:46:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src30.csv
[Tue Jul 31 18:46:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 18:46:43 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src30.ximg exists
[Tue Jul 31 18:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue Jul 31 18:46:43 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg exists
[Tue Jul 31 18:46:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src30.csv
[Tue Jul 31 18:46:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 21:17:46 2012] Source 15 is offset by -5.607386 and -0.529351 pixels which is larger than
2 X fitted extent = 1.252855 x 1.896189, not incorporating fit results
[Tue Jul 31 21:17:46 2012] Source 15 is offset by 2.909350 and -1.371305 pixels which is larger than
2 X fitted extent = 1.322051 x 1.322051, not incorporating fit results
[Tue Jul 31 21:17:46 2012] Warning, spatial fit 30 centroid is now closest to src. 12
[Tue Jul 31 21:17:46 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 21:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 21:17:46 2012] Assessing source extent using major
[Tue Jul 31 21:17:46 2012] Source does appear to be extended
[Tue Jul 31 21:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 21:17:46 2012] Source is confused with source 8
[Tue Jul 31 23:33:15 2012] Using EEF radius (= 11.40 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 23:33:15 2012] Initial guess for spatial extent in simple fitting = 11.40"
[Tue Jul 31 23:33:15 2012] source mask rpix=2.6, npix_max = 38, mask sum = 23, frac = 0.591
[Tue Jul 31 23:33:15 2012] Giving source the simple spatial ID 23 for pass 1, mean size = 11.40"
[Wed Aug  1 01:11:36 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_src23.ximg exists
[Wed Aug  1 01:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_src23.csv
[Wed Aug  1 01:11:36 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_src23_1.ximg exists
[Wed Aug  1 01:11:36 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_src23.csv
[Wed Aug  1 01:11:36 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 01:11:37 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Wed Aug  1 01:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Aug  1 01:11:37 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Wed Aug  1 01:11:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src23.csv
[Wed Aug  1 01:11:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 03:07:06 2012] Spatial fit model total counts = 1552.500000, observed total counts = 1292.000000
[Wed Aug  1 03:07:06 2012] Poor agreement between spatial fit and data for source 15
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 03:07:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 03:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 03:07:06 2012] Assessing source extent using major
[Wed Aug  1 03:07:06 2012] Source does appear to be extended
[Wed Aug  1 03:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 03:55:00 2012] XMMSAS src. selection expression = ellipse(17741.761429, 34595.344452, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Aug  1 03:55:00 2012] Writing source region out to fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src15_src.reg
[Wed Aug  1 03:55:00 2012] Extracting stamp from image fullrun_mos1_xmm0112950401_pi300-10000_cl_sm2.00.img.gz, (167, 361) - (242, 436)
[Wed Aug  1 03:55:00 2012] XMMSAS bgd. selection expression = annulus(17741.761429, 34595.344452, 1087.500000, 2175.000000, X, Y) && !ellipse(18637.691600, 33627.254800, 1716.136049, 1716.136049, 0.000000, X, Y) && !ellipse(18788.084579, 33937.701660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18480.833969, 33269.011292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19668.887894, 32840.797546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19791.462631, 33272.983215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16871.197235, 34857.016174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17560.217163, 33440.226166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18018.605316, 33717.087311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16427.610870, 34587.769653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16625.645400, 35013.478600, 1404.688040, 1404.688040, 0.000000, X, Y) && !ellipse(17131.379486, 33367.287201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17814.257004, 32927.245300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15796.636000, 34201.440000, 1885.512054, 1885.512054, 0.000000, X, Y) && !ellipse(17866.842514, 34240.823700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17137.667923, 32754.097565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17201.241272, 33871.891449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16758.842000, 33884.636000, 1796.512052, 1796.512052, 0.000000, X, Y)
[Wed Aug  1 03:55:00 2012] Writing fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src15.gif
[Wed Aug  1 04:05:39 2012] Mean detx,y = (9163.58, -6777.30) 
[Wed Aug  1 04:05:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 04:05:56 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 04:05:56 2012] Setting source spectrum file to fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Aug  1 04:05:56 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Aug  1 04:27:06 2012] Not generating rmf since there are only 84 counts
[Wed Aug  1 04:27:06 2012] rmf not generated due to insufficient counts
[Wed Aug  1 04:49:43 2012] Updating aperture counts using extracted products
[Wed Aug  1 04:49:43 2012] Error reading totcts from fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Aug  1 04:49:44 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 04:49:44 2012] Using photon index=1.80, rate=0.00519, arf fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src15.arf
[Wed Aug  1 04:49:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 04:49:44 2012] Updating source flux to 1.7e-13
[Wed Aug  1 04:49:46 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting