[Tue Jul 31 12:49:53 2012] Detection parameters:
  Position = (189.6, 404.0) = 9 9 24.24 -9 39 45.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.5 +/- 19.0
  Background counts = 78.8
  Rate = 0.007 +/- 0.001

[Tue Jul 31 12:49:55 2012] Off-axis axis estimate = 10.99'
[Tue Jul 31 16:12:34 2012] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 16:12:34 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 31 16:12:34 2012] Initial guess for spatial extent in simple fitting = 11.92"
[Tue Jul 31 16:12:34 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.999
[Tue Jul 31 16:12:34 2012] Giving source the simple spatial ID 18 for pass 0, mean size = 11.92"
[Tue Jul 31 18:46:42 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src18.ximg exists
[Tue Jul 31 18:46:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src18.csv
[Tue Jul 31 18:46:42 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src18_1.ximg exists
[Tue Jul 31 18:46:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src18.csv
[Tue Jul 31 18:46:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src18_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_src18.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 31 18:46:43 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src18.ximg exists
[Tue Jul 31 18:46:43 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src18_1.ximg exists
[Tue Jul 31 18:46:43 2012] Fit fullrun_mos1_xmm0112950401_pi300-10000_cl_pass0_tfrozen_src18 appears to have run properly
[Tue Jul 31 21:17:46 2012] Warning, spatial fit 18 centroid is now closest to src. 29
[Tue Jul 31 21:17:46 2012] Source 14 is offset by -2.831534 and -0.370498 pixels which is larger than
2 X fitted extent = 1.364593 x 1.364593, not incorporating fit results
[Tue Jul 31 21:17:46 2012] Spatial fit model total counts = 1638.530000, observed total counts = 1426.000000
[Tue Jul 31 21:17:46 2012] Poor agreement between spatial fit and data for source 14
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 31 21:17:46 2012] Source 14 is offset by -0.402752 and 1.576467 pixels which is larger than
2 X fitted extent = 1.405435 x 1.405435, not incorporating fit results
[Tue Jul 31 21:17:46 2012] Vigneting correction estimate = 1.000000
[Tue Jul 31 21:17:46 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 31 21:17:46 2012] Assessing source extent using major
[Tue Jul 31 21:17:46 2012] Source does appear to be extended
[Tue Jul 31 21:17:46 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 31 21:17:46 2012] Source is confused with source 5
[Tue Jul 31 23:33:15 2012] Using EEF radius (= 11.92 ")to estimate initial spatial extent for simple fitting
[Tue Jul 31 23:33:15 2012] Initial guess for spatial extent in simple fitting = 11.92"
[Tue Jul 31 23:33:15 2012] source mask rpix=2.7, npix_max = 42, mask sum = 42, frac = 0.999
[Tue Jul 31 23:33:15 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 11.92"
[Wed Aug  1 01:11:36 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_src15.ximg exists
[Wed Aug  1 01:11:36 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_src15_1.ximg exists
[Wed Aug  1 01:11:36 2012] Fit fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_src15 appears to have run properly
[Wed Aug  1 01:11:36 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Wed Aug  1 01:11:36 2012] fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Wed Aug  1 01:11:36 2012] Fit fullrun_mos1_xmm0112950401_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Wed Aug  1 03:07:06 2012] Warning: source 10 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 14 at 10.471286 pixels away
[Wed Aug  1 03:07:06 2012] Spatial fit model total counts = 1531.550000, observed total counts = 1534.000000
[Wed Aug  1 03:07:06 2012] Offset between fit and detection position for source 14 = 2.288315 pixels
[Wed Aug  1 03:07:06 2012] 1500.387000 total counts/ 1329.360000 bgd. counts: snr = 4.690762
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 2.288315 pixels
  Position = (191.7, 403.0) = 9 9 23.63 -9 39 53.9
  Extent = 17.6 (6.0-23.8)", rotation angle = 0
  Source counts = 171.0 +/- 38.7
  Background counts = 1329.4
  Rate = 0.01 +/- 0.002
[Wed Aug  1 03:07:06 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 03:07:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 03:07:06 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 03:07:06 2012] Source does appear to be extended
[Wed Aug  1 03:07:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 03:55:00 2012] XMMSAS src. selection expression = ellipse(16625.645400, 35013.478600, 1053.516030, 1053.516030, 0.000000, X, Y)
[Wed Aug  1 03:55:00 2012] Writing source region out to fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src14_src.reg
[Wed Aug  1 03:55:00 2012] Extracting stamp from image fullrun_mos1_xmm0112950401_pi300-10000_cl_sm2.00.img.gz, (131, 342) - (252, 464)
[Wed Aug  1 03:55:00 2012] XMMSAS bgd. selection expression = annulus(16625.645400, 35013.478600, 1755.860051, 3511.720101, X, Y) && !ellipse(18637.691600, 33627.254800, 1716.136049, 1716.136049, 0.000000, X, Y) && !ellipse(18185.536301, 30896.033722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18788.084579, 33937.701660, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18480.833969, 33269.011292, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19503.324249, 31178.188995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19668.887894, 32840.797546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19791.462631, 33272.983215, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16871.197235, 34857.016174, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17560.217163, 33440.226166, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18018.605316, 33717.087311, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16427.610870, 34587.769653, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17131.379486, 33367.287201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17814.257004, 32927.245300, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(15796.636000, 34201.440000, 1885.512054, 1885.512054, 0.000000, X, Y) && !ellipse(17866.842514, 34240.823700, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17137.667923, 32754.097565, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17201.241272, 33871.891449, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16758.842000, 33884.636000, 1796.512052, 1796.512052, 0.000000, X, Y) && !ellipse(17741.761429, 34595.344452, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Aug  1 03:55:00 2012] Writing fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src14.gif
[Wed Aug  1 04:01:40 2012] Mean detx,y = (9837.66, -7847.08) 
[Wed Aug  1 04:01:41 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Aug  1 04:02:15 2012] Binned source spectrum to 10 counts/bin
[Wed Aug  1 04:02:15 2012] Setting source spectrum file to fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Aug  1 04:02:15 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Aug  1 04:49:43 2012] Updating aperture counts using extracted products
[Wed Aug  1 04:49:43 2012] Error reading totcts from fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Aug  1 04:49:43 2012] Calculating source flux in energy range 0.30-8.00
[Wed Aug  1 04:49:43 2012] Using photon index=1.80, rate=0.0105, arf fullrun_mos1_xmm0112950401_pi300-10000_pass1_cl_src14.arf
[Wed Aug  1 04:49:43 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Aug  1 04:49:43 2012] Updating source flux to 2.1e-13
[Wed Aug  1 04:49:46 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Wed Aug  1 04:49:46 2012] Flag p found in src. 14 procflags, skipping spectral fitting
[Wed Aug  1 04:49:46 2012] Flag c found in src. 14 procflags, skipping spectral fitting