[Fri Aug 24 10:14:04 2012] Detection parameters:
  Position = (280.3, 229.0) = 9 9 7.31 -9 38 32.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 98.2 +/- 20.0
  Background counts = 142.2
  Rate = 0.02 +/- 0.004

[Fri Aug 24 10:14:05 2012] Off-axis axis estimate = 5.20'
[Fri Aug 24 10:17:51 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 10:17:51 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Fri Aug 24 10:17:51 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.130
[Fri Aug 24 10:17:51 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 9.03"
[Fri Aug 24 13:05:21 2012] fullrun_pn_xmm0112950301_pi300-10000_cl_pass0_src21.ximg exists
[Fri Aug 24 13:05:21 2012] fullrun_pn_xmm0112950301_pi300-10000_cl_pass0_src21_1.ximg exists
[Fri Aug 24 13:05:21 2012] Fit fullrun_pn_xmm0112950301_pi300-10000_cl_pass0_src21 appears to have run properly
[Fri Aug 24 13:05:22 2012] fullrun_pn_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Fri Aug 24 13:05:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Aug 24 13:05:22 2012] fullrun_pn_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Fri Aug 24 13:05:22 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src21.csv
[Fri Aug 24 13:05:22 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src21_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 18:03:55 2012] Source 23 is offset by -5.157455 and 7.089322 pixels which is larger than
2 X fitted extent = 1.053572 x 1.053572, not incorporating fit results
[Fri Aug 24 18:03:55 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 18:03:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 18:03:55 2012] Assessing source extent using major
[Fri Aug 24 18:03:55 2012] Source does appear to be extended
[Fri Aug 24 18:03:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 18:04:29 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 18:04:29 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Fri Aug 24 18:04:29 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.130
[Fri Aug 24 18:04:29 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 9.03"
[Fri Aug 24 20:01:39 2012] fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_src14.ximg exists
[Fri Aug 24 20:01:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_src14.csv
[Fri Aug 24 20:01:39 2012] fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_src14_1.ximg exists
[Fri Aug 24 20:01:39 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_src14.csv
[Fri Aug 24 20:01:39 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 20:01:40 2012] fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Fri Aug 24 20:01:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Aug 24 20:01:40 2012] fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Fri Aug 24 20:01:40 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src14.csv
[Fri Aug 24 20:01:40 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Aug 25 00:35:12 2012] Warning: source 14 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 23 at 12.285293 pixels away
[Sat Aug 25 00:35:12 2012] Source 23 is offset by 6.016016 and 7.267736 pixels which is larger than
2 X fitted extent = 1.214662 x 1.214662, not incorporating fit results
[Sat Aug 25 00:35:12 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 00:35:12 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 00:35:12 2012] Assessing source extent using major
[Sat Aug 25 00:35:12 2012] Source does appear to be extended
[Sat Aug 25 00:35:12 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 00:35:40 2012] XMMSAS src. selection expression = ellipse(24337.487427, 19873.199036, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Aug 25 00:35:40 2012] Writing source region out to fullrun_pn_xmm0112950301_pi300-10000_pass1_cl_src23_src.reg
[Sat Aug 25 00:35:40 2012] Extracting stamp from image fullrun_pn_xmm0112950301_pi300-10000_cl_sm2.00.img.gz, (243, 191) - (318, 266)
[Sat Aug 25 00:35:40 2012] XMMSAS bgd. selection expression = annulus(24337.487427, 19873.199036, 1087.500000, 2175.000000, X, Y) && !ellipse(21813.895355, 18427.428055, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24647.881592, 18317.716934, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24059.699677, 18081.715363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22523.550171, 17759.947052, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22070.030014, 17208.818726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20772.196800, 17235.425600, 1698.424049, 370.726411, 162.320000, X, Y) && !ellipse(21472.198395, 16912.713928, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 00:35:40 2012] Writing fullrun_pn_xmm0112950301_pi300-10000_pass1_cl_src23.gif
[Sat Aug 25 00:41:57 2012] Mean detx,y = (-4364.90, 6838.22) 
[Sat Aug 25 00:41:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 00:42:08 2012] grppha failed
[Sat Aug 25 00:42:09 2012] Setting source spectrum file to fullrun_pn_xmm0112950301_pi300-10000_pass1_cl_src23_src.pi.gz
[Sat Aug 25 00:42:09 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112950301_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Sat Aug 25 00:53:50 2012] Not generating rmf since there are only 98 counts
[Sat Aug 25 00:53:50 2012] rmf not generated due to insufficient counts
[Sat Aug 25 01:21:30 2012] Updating aperture counts using extracted products
[Sat Aug 25 01:21:30 2012] Error reading totcts from fullrun_pn_xmm0112950301_pi300-10000_pass1_cl_src23_src.pi.gz
[Sat Aug 25 01:21:30 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 01:21:34 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Aug 25 01:21:35 2012] xmm0112950301/analysis//spectral/fullrun_pn_xmm0112950301_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete