[Fri Aug 24 10:15:40 2012] Detection parameters: Position = (246.0, 186.9) = 9 9 17.41 -9 41 35.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 130.4 +/- 19.4 Background counts = 80.6 Rate = 0.009 +/- 0.001 [Fri Aug 24 10:15:42 2012] Off-axis axis estimate = 8.94' [Fri Aug 24 15:55:36 2012] Using EEF radius (= 10.90 ")to estimate initial spatial extent for simple fitting [Fri Aug 24 15:55:36 2012] Initial guess for spatial extent in simple fitting = 10.90" [Fri Aug 24 15:55:36 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.997 [Fri Aug 24 15:55:36 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 10.90" [Fri Aug 24 18:03:40 2012] fullrun_mos2_xmm0112950301_pi300-10000_cl_pass0_src8.ximg exists [Fri Aug 24 18:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950301_pi300-10000_cl_pass0_src8.csv [Fri Aug 24 18:03:40 2012] fullrun_mos2_xmm0112950301_pi300-10000_cl_pass0_src8_1.ximg exists [Fri Aug 24 18:03:40 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112950301_pi300-10000_cl_pass0_src8.csv [Fri Aug 24 18:03:40 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112950301_pi300-10000_cl_pass0_src8_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112950301_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Aug 24 18:03:41 2012] fullrun_mos2_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src8.ximg exists [Fri Aug 24 18:03:41 2012] fullrun_mos2_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists [Fri Aug 24 18:03:41 2012] Fit fullrun_mos2_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly [Fri Aug 24 18:04:16 2012] Warning, spatial fit 8 centroid is now closest to src. 10 [Fri Aug 24 18:04:16 2012] Spatial fit model total counts = 1467.170000, observed total counts = 1466.000000 [Fri Aug 24 18:04:16 2012] Offset between fit and detection position for source 13 = 0.820263 pixels [Fri Aug 24 18:04:16 2012] Warning, changing simple spatial fit ID from 8 to 17 [Fri Aug 24 18:04:16 2012] 1466.012580 total counts/ 1460.810000 bgd. counts: snr = 0.136120 Spatial fit parameters: Offset between fit and detection position for source 13 = 0.820263 pixels Position = (245.9, 186.1) = 9 9 17.44 -9 41 38.6 Extent = 2.8 (2.7-4.3)", rotation angle = 0 Source counts = 5.2 +/- 38.3 Background counts = 1460.8 Rate = 0.0004 +/- 0.003 Deleting source due to low Poisson probability