[Fri Aug 24 10:14:54 2012] Detection parameters:
  Position = (236.8, 189.0) = 9 9 20.12 -9 41 26.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 132.1 +/- 19.4
  Background counts = 69.4
  Rate = 0.009 +/- 0.001

[Fri Aug 24 10:14:54 2012] Off-axis axis estimate = 9.11'
[Fri Aug 24 13:05:24 2012] Using EEF radius (= 10.98 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:05:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Aug 24 13:05:24 2012] Initial guess for spatial extent in simple fitting = 10.98"
[Fri Aug 24 13:05:24 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.984
[Fri Aug 24 13:05:24 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 10.98"
[Fri Aug 24 15:55:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src7.ximg exists
[Fri Aug 24 15:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src7.csv
[Fri Aug 24 15:55:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Aug 24 15:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src7.csv
[Fri Aug 24 15:55:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 15:55:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Aug 24 15:55:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Aug 24 15:55:35 2012] Fit fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Aug 24 18:04:07 2012] Spatial fit model total counts = 1290.370000, observed total counts = 1290.000000
[Fri Aug 24 18:04:07 2012] Offset between fit and detection position for source 54 = 0.345350 pixels
[Fri Aug 24 18:04:07 2012] 1249.511500 total counts/ 1211.030000 bgd. counts: snr = 1.105795
Spatial fit parameters:
  Offset between fit and detection position for source 54 = 0.345350 pixels
  Position = (236.6, 188.7) = 9 9 20.19 -9 41 27.0
  Extent = 5.3 (3.1-8.6)", rotation angle = 0
  Source counts = 38.5 +/- 35.3
  Background counts = 1211.0
  Rate = 0.003 +/- 0.003
  Deleting source due to low Poisson probability