[Fri Aug 24 10:14:53 2012] Detection parameters:
  Position = (229.9, 213.9) = 9 9 22.13 -9 39 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.6 +/- 16.9
  Background counts = 57.1
  Rate = 0.007 +/- 0.001

[Fri Aug 24 10:14:54 2012] Off-axis axis estimate = 7.89'
[Fri Aug 24 13:05:24 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:05:24 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Fri Aug 24 13:05:24 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.082
[Fri Aug 24 13:05:24 2012] Giving source the simple spatial ID 23 for pass 0, mean size = 10.37"
[Fri Aug 24 15:55:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src23.ximg exists
[Fri Aug 24 15:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src23.csv
[Fri Aug 24 15:55:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src23_1.ximg exists
[Fri Aug 24 15:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src23.csv
[Fri Aug 24 15:55:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src23_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 15:55:36 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src23.ximg exists
[Fri Aug 24 15:55:36 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src23_1.ximg exists
[Fri Aug 24 15:55:36 2012] Fit fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src23 appears to have run properly
[Fri Aug 24 18:04:07 2012] Warning, spatial fit 23 centroid is now closest to src. 30
[Fri Aug 24 18:04:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 18:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 18:04:07 2012] Assessing source extent using major
[Fri Aug 24 18:04:07 2012] Source does appear to be extended
[Fri Aug 24 18:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 18:04:07 2012] Source is confused with source 39
[Fri Aug 24 20:01:41 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 20:01:41 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Fri Aug 24 20:01:41 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.082
[Fri Aug 24 20:01:41 2012] Giving source the simple spatial ID 17 for pass 1, mean size = 10.37"
[Fri Aug 24 22:46:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src17.ximg exists
[Fri Aug 24 22:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src17.csv
[Fri Aug 24 22:46:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src17_1.ximg exists
[Fri Aug 24 22:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src17.csv
[Fri Aug 24 22:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 22:46:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src17.ximg exists
[Fri Aug 24 22:46:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src17_1.ximg exists
[Fri Aug 24 22:46:35 2012] Fit fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src17 appears to have run properly
[Sat Aug 25 00:35:22 2012] Source 31 is offset by -0.012992 and -1.532986 pixels which is larger than
2 X fitted extent = 1.308883 x 1.308883, not incorporating fit results
[Sat Aug 25 00:35:22 2012] Spatial fit model total counts = 3021.380000, observed total counts = 2932.000000
[Sat Aug 25 00:35:22 2012] Offset between fit and detection position for source 31 = 5.686105 pixels
[Sat Aug 25 00:35:22 2012] Warning, changing simple spatial fit ID from 17 to 32
[Sat Aug 25 00:35:22 2012] 2905.300000 total counts/ 2575.430000 bgd. counts: snr = 6.500069
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 5.686105 pixels
  Position = (233.9, 209.8) = 9 9 20.97 -9 39 55.3
  Extent = 29.4 (10.5-41.1)", rotation angle = 0
  Source counts = 329.9 +/- 53.9
  Background counts = 2575.4
  Rate = 0.02 +/- 0.004
[Sat Aug 25 00:35:22 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 00:35:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 00:35:22 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 00:35:22 2012] Source does appear to be extended
[Sat Aug 25 00:35:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 00:53:53 2012] XMMSAS src. selection expression = ellipse(20298.628000, 18204.428000, 1766.652051, 1766.652051, 0.000000, X, Y)
[Sat Aug 25 00:53:53 2012] Writing source region out to fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src31_src.reg
[Sat Aug 25 00:53:53 2012] Extracting stamp from image fullrun_mos1_xmm0112950301_pi300-10000_cl_sm2.00.img.gz, (132, 108) - (335, 311)
[Sat Aug 25 00:53:53 2012] XMMSAS bgd. selection expression = annulus(20298.628000, 18204.428000, 2944.420085, 5888.840169, X, Y) && !ellipse(24726.340363, 18481.784470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21615.174377, 16317.022263, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25361.931400, 19854.631880, 911.136026, 911.136026, 0.000000, X, Y) && !ellipse(20770.018814, 16908.545532, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19828.885269, 17964.864868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20912.254044, 15971.454269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20242.148544, 17003.225204, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19283.059036, 12433.990143, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18694.654000, 19638.932000, 2151.544062, 2151.544062, 0.000000, X, Y) && !ellipse(22216.594000, 17542.512000, 1679.280048, 1679.280048, 0.000000, X, Y) && !ellipse(22324.733612, 16381.978882, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19317.727600, 19601.536000, 1657.032048, 1657.032048, 0.000000, X, Y) && !ellipse(19060.758000, 18209.786000, 2046.864059, 1878.760054, 242.545710, X, Y) && !ellipse(19986.771896, 16651.274521, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20939.452000, 18617.098000, 1645.264047, 1645.264047, 0.000000, X, Y) && !ellipse(19332.115800, 18914.282000, 3314.064095, 1904.584055, 53.953000, X, Y) && !ellipse(19363.658000, 16635.274200, 1761.832051, 1761.832051, 0.000000, X, Y) && !ellipse(21077.250839, 17340.598450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19384.429382, 17963.871887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18367.474838, 17778.844223, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(14789.845428, 15450.058289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17863.912000, 20562.386000, 1672.904048, 1672.904048, 0.000000, X, Y)
[Sat Aug 25 00:53:53 2012] Writing fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src31.gif
[Sat Aug 25 00:58:44 2012] Mean detx,y = (-7395.70, -8986.03) 
[Sat Aug 25 00:58:45 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 00:59:37 2012] grppha failed
[Sat Aug 25 00:59:37 2012] Setting source spectrum file to fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src31_src.pi.gz
[Sat Aug 25 00:59:37 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Aug 25 01:21:30 2012] Updating aperture counts using extracted products
[Sat Aug 25 01:21:30 2012] Error reading totcts from fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src31_src.pi.gz
[Sat Aug 25 01:21:31 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 01:21:32 2012] Flag b found in src. 31 procflags, skipping spectral fitting
[Sat Aug 25 01:21:32 2012] Flag c found in src. 31 procflags, skipping spectral fitting
[Sat Aug 25 01:21:32 2012] Source 31 has no response, skipping
[Sat Aug 25 01:21:33 2012] xmm0112950301/analysis//spectral/fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src31_pl.csv not found, spectral fit skipped or did not complete