[Fri Aug 24 10:14:52 2012] Detection parameters:
  Position = (215.2, 445.8) = 9 9 26.46 -9 22 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 69.2 +/- 10.6
  Background counts = 5.4
  Rate = 0.005 +/- 0.0008

[Fri Aug 24 10:14:54 2012] Off-axis axis estimate = 12.27'
[Fri Aug 24 13:05:24 2012] Using EEF radius (= 12.57 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:05:24 2012] Initial guess for spatial extent in simple fitting = 12.57"
[Fri Aug 24 13:05:24 2012] source mask rpix=2.9, npix_max = 45, mask sum = 49, frac = 1.067
[Fri Aug 24 13:05:24 2012] Giving source the simple spatial ID 49 for pass 0, mean size = 12.57"
[Fri Aug 24 15:55:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src49.ximg exists
[Fri Aug 24 15:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src49.csv
[Fri Aug 24 15:55:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src49_1.ximg exists
[Fri Aug 24 15:55:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src49.csv
[Fri Aug 24 15:55:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 15:55:36 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Fri Aug 24 15:55:36 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Fri Aug 24 15:55:36 2012] Fit fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src49 appears to have run properly
[Fri Aug 24 18:04:07 2012] Spatial fit model total counts = 118.763000, observed total counts = 119.000000
[Fri Aug 24 18:04:07 2012] Offset between fit and detection position for source 3 = 0.158981 pixels
[Fri Aug 24 18:04:07 2012] 118.978900 total counts/ 70.987900 bgd. counts: snr = 5.695969
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.158981 pixels
  Position = (215.1, 445.7) = 9 9 26.47 -9 22 49.2
  Extent = 6.4 (4.5-9.2)", rotation angle = 0
  Source counts = 48.0 +/- 10.9
  Background counts = 71.0
  Rate = 0.003 +/- 0.0008
[Fri Aug 24 18:04:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 18:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 18:04:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 18:04:07 2012] Source does appear to be extended
[Fri Aug 24 18:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 20:01:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 20:01:41 2012] Initial guess for spatial extent in simple fitting = 6.40"
[Fri Aug 24 20:01:41 2012] source mask rpix=1.5, npix_max = 15, mask sum = 16, frac = 1.030
[Fri Aug 24 20:01:41 2012] Giving source the simple spatial ID 39 for pass 1, mean size = 6.40"
[Fri Aug 24 22:46:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src39.ximg exists
[Fri Aug 24 22:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src39.csv
[Fri Aug 24 22:46:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src39_1.ximg exists
[Fri Aug 24 22:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src39.csv
[Fri Aug 24 22:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 22:46:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src39.ximg exists
[Fri Aug 24 22:46:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src39_1.ximg exists
[Fri Aug 24 22:46:35 2012] Fit fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src39 appears to have run properly
[Sat Aug 25 00:35:22 2012] Spatial fit model total counts = 112.998000, observed total counts = 113.000000
[Sat Aug 25 00:35:22 2012] Offset between fit and detection position for source 3 = 0.020796 pixels
[Sat Aug 25 00:35:22 2012] 113.246700 total counts/ 65.231400 bgd. counts: snr = 5.944992
Spatial fit parameters:
  Offset between fit and detection position for source 3 = 0.020796 pixels
  Position = (215.1, 445.7) = 9 9 26.47 -9 22 49.2
  Extent = 6.5 (4.4-9.0)", rotation angle = 0
  Source counts = 48.0 +/- 10.6
  Background counts = 65.2
  Rate = 0.003 +/- 0.0008
[Sat Aug 25 00:35:22 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 00:35:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 00:35:22 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 00:35:22 2012] Source does appear to be extended
[Sat Aug 25 00:35:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 00:53:54 2012] XMMSAS src. selection expression = ellipse(18667.730320, 38726.704800, 387.271211, 387.271211, 0.000000, X, Y)
[Sat Aug 25 00:53:54 2012] Writing source region out to fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src3_src.reg
[Sat Aug 25 00:53:54 2012] Extracting stamp from image fullrun_mos1_xmm0112950301_pi300-10000_cl_sm2.00.img.gz, (193, 423) - (237, 468)
[Sat Aug 25 00:53:54 2012] XMMSAS bgd. selection expression = annulus(18667.730320, 38726.704800, 645.452019, 1290.904037, X, Y)
[Sat Aug 25 00:53:54 2012] Writing fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src3.gif
[Sat Aug 25 01:08:58 2012] Mean detx,y = (12905.90, -4779.34) 
[Sat Aug 25 01:08:59 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 01:09:06 2012] grppha failed
[Sat Aug 25 01:09:07 2012] Setting source spectrum file to fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Aug 25 01:09:07 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sat Aug 25 01:11:11 2012] Not generating rmf since there are only 48 counts
[Sat Aug 25 01:11:11 2012] rmf not generated due to insufficient counts
[Sat Aug 25 01:21:30 2012] Updating aperture counts using extracted products
[Sat Aug 25 01:21:31 2012] Error reading totcts from fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src3_src.pi.gz
[Sat Aug 25 01:21:31 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 01:21:32 2012] Source 3 has fewer than 100.000000 counts, skipping spectral fitting
[Sat Aug 25 01:21:33 2012] xmm0112950301/analysis//spectral/fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete