[Fri Aug 24 10:14:53 2012] Detection parameters:
  Position = (370.4, 240.2) = 9 8 40.82 -9 37 38.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 61.8 +/- 14.5
  Background counts = 55.6
  Rate = 0.007 +/- 0.002

[Fri Aug 24 10:14:54 2012] Off-axis axis estimate = 6.71'
[Fri Aug 24 13:05:24 2012] Using EEF radius (= 9.78 ")to estimate initial spatial extent for simple fitting
[Fri Aug 24 13:05:24 2012] Initial guess for spatial extent in simple fitting = 9.78"
[Fri Aug 24 13:05:24 2012] source mask rpix=2.2, npix_max = 30, mask sum = 30, frac = 0.992
[Fri Aug 24 13:05:24 2012] Giving source the simple spatial ID 25 for pass 0, mean size = 9.78"
[Fri Aug 24 15:55:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src25.ximg exists
[Fri Aug 24 15:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src25.csv
[Fri Aug 24 15:55:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Aug 24 15:55:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src25.csv
[Fri Aug 24 15:55:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 15:55:36 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Aug 24 15:55:36 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Aug 24 15:55:36 2012] Fit fullrun_mos1_xmm0112950301_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Aug 24 18:04:07 2012] Source 19 is offset by -0.109839 and -1.266617 pixels which is larger than
2 X fitted extent = 1.127692 x 1.127692, not incorporating fit results
[Fri Aug 24 18:04:07 2012] Spatial fit model total counts = 803.133000, observed total counts = 799.000000
[Fri Aug 24 18:04:07 2012] Offset between fit and detection position for source 19 = 1.644342 pixels
[Fri Aug 24 18:04:07 2012] Warning, changing simple spatial fit ID from 25 to 41
[Fri Aug 24 18:04:07 2012] 795.202000 total counts/ 644.661000 bgd. counts: snr = 5.929104
Spatial fit parameters:
  Offset between fit and detection position for source 19 = 1.644342 pixels
  Position = (371.6, 241.3) = 9 8 40.47 -9 37 38.1
  Extent = 19.4 (19.3-19.5)", rotation angle = 0
  Source counts = 150.5 +/- 28.2
  Background counts = 644.7
  Rate = 0.01 +/- 0.002
[Fri Aug 24 18:04:07 2012] Vigneting correction estimate = 1.000000
[Fri Aug 24 18:04:07 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Aug 24 18:04:07 2012] Assessing source extent using major axis lower bound
[Fri Aug 24 18:04:07 2012] Source does appear to be extended
[Fri Aug 24 18:04:07 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Aug 24 18:04:07 2012] Source is confused with source 20
[Fri Aug 24 20:01:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Aug 24 20:01:41 2012] Initial guess for spatial extent in simple fitting = 19.44"
[Fri Aug 24 20:01:41 2012] source mask rpix=4.5, npix_max = 98, mask sum = 100, frac = 1.013
[Fri Aug 24 20:01:41 2012] Giving source the simple spatial ID 19 for pass 1, mean size = 19.44"
[Fri Aug 24 22:46:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src19.ximg exists
[Fri Aug 24 22:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src19.csv
[Fri Aug 24 22:46:34 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src19_1.ximg exists
[Fri Aug 24 22:46:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src19.csv
[Fri Aug 24 22:46:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src19_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_src19.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Aug 24 22:46:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src19.ximg exists
[Fri Aug 24 22:46:35 2012] fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src19_1.ximg exists
[Fri Aug 24 22:46:35 2012] Fit fullrun_mos1_xmm0112950301_pi300-10000_cl_pass1_tfrozen_src19 appears to have run properly
[Sat Aug 25 00:35:22 2012] Warning, spatial fit 19 centroid is now closest to src. 18
[Sat Aug 25 00:35:22 2012] Vigneting correction estimate = 1.000000
[Sat Aug 25 00:35:22 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Aug 25 00:35:22 2012] Assessing source extent using major axis lower bound
[Sat Aug 25 00:35:22 2012] Source does appear to be extended
[Sat Aug 25 00:35:22 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Aug 25 00:53:54 2012] XMMSAS src. selection expression = ellipse(32277.052000, 20948.228000, 1166.142034, 1166.142034, 0.000000, X, Y)
[Sat Aug 25 00:53:54 2012] Writing source region out to fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src19_src.reg
[Sat Aug 25 00:53:54 2012] Extracting stamp from image fullrun_mos1_xmm0112950301_pi300-10000_cl_sm2.00.img.gz, (305, 174) - (439, 308)
[Sat Aug 25 00:53:54 2012] XMMSAS bgd. selection expression = annulus(32277.052000, 20948.228000, 1943.570056, 3887.140112, X, Y) && !ellipse(30013.265686, 20613.808838, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(30869.993195, 22237.375183, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35198.564453, 16888.046051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32990.038000, 20395.718000, 1599.544046, 1599.544046, 0.000000, X, Y) && !ellipse(30898.980400, 21925.638000, 1439.944041, 758.951222, 256.767000, X, Y) && !ellipse(33160.688751, 21733.102814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33831.681030, 20520.082321, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34592.666000, 21349.709440, 1669.336048, 1669.336048, 0.000000, X, Y) && !ellipse(34656.619873, 18280.551834, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Aug 25 00:53:54 2012] Writing fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src19.gif
[Sat Aug 25 00:59:54 2012] Mean detx,y = (-7924.63, 3329.34) 
[Sat Aug 25 00:59:55 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Aug 25 01:00:19 2012] grppha failed
[Sat Aug 25 01:00:20 2012] Setting source spectrum file to fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src19_src.pi.gz
[Sat Aug 25 01:00:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src19_bgd.pi.gz
[Sat Aug 25 01:21:30 2012] Updating aperture counts using extracted products
[Sat Aug 25 01:21:30 2012] Error reading totcts from fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src19_src.pi.gz
[Sat Aug 25 01:21:31 2012] No arf file for this source, not re-computing flux
[Sat Aug 25 01:21:32 2012] Flag b found in src. 19 procflags, skipping spectral fitting
[Sat Aug 25 01:21:32 2012] Flag c found in src. 19 procflags, skipping spectral fitting
[Sat Aug 25 01:21:32 2012] Source 19 has no response, skipping
[Sat Aug 25 01:21:33 2012] xmm0112950301/analysis//spectral/fullrun_mos1_xmm0112950301_pi300-10000_pass1_cl_src19_pl.csv not found, spectral fit skipped or did not complete