[Tue May 21 08:29:15 2013] Detection parameters:
  Position = (274.0, 372.2) = 3 15 28.06 -55 10 33.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 56.8 +/- 9.6
  Background counts = 5.3
  Rate = 0.01 +/- 0.002

[Tue May 21 08:29:17 2013] Off-axis axis estimate = 5.63'
[Tue May 21 08:29:42 2013] Using EEF radius (= 9.24 ")to estimate initial spatial extent for simple fitting
[Tue May 21 08:29:42 2013] Initial guess for spatial extent in simple fitting = 9.24"
[Tue May 21 08:29:42 2013] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.088
[Tue May 21 08:29:42 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 9.24"
[Tue May 21 08:29:43 2013] fullrun_pn_xmm0112940401_pi300-10000_cl_pass0_src4.ximg exists
[Tue May 21 08:29:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112940401_pi300-10000_cl_pass0_src4.csv
[Tue May 21 08:29:43 2013] fullrun_pn_xmm0112940401_pi300-10000_cl_pass0_src4_1.ximg exists
[Tue May 21 08:29:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112940401_pi300-10000_cl_pass0_src4.csv
[Tue May 21 08:29:43 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112940401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112940401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:29:43 2013] fullrun_pn_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Tue May 21 08:29:43 2013] fullrun_pn_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Tue May 21 08:29:43 2013] Fit fullrun_pn_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Tue May 21 08:29:52 2013] Spatial fit model total counts = 131.219000, observed total counts = 123.000000
[Tue May 21 08:29:52 2013] Offset between fit and detection position for source 4 = 0.061843 pixels
[Tue May 21 08:29:52 2013] 131.291800 total counts/ 95.005300 bgd. counts: snr = 3.722813
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.061843 pixels
  Position = (273.9, 372.1) = 3 15 28.09 -55 10 33.0
  Extent = 5.3 (3.8-7.4)", rotation angle = 0
  Source counts = 36.3 +/- 11.5
  Background counts = 95.0
  Rate = 0.006 +/- 0.002
[Tue May 21 08:29:52 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:29:52 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:29:52 2013] Assessing source extent using major axis lower bound
[Tue May 21 08:29:52 2013] Source does appear to be extended
[Tue May 21 08:29:52 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:13 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 08:30:13 2013] Initial guess for spatial extent in simple fitting = 5.28"
[Tue May 21 08:30:13 2013] source mask rpix=1.2, npix_max = 11, mask sum = 16, frac = 1.361
[Tue May 21 08:30:13 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 5.28"
[Tue May 21 08:30:13 2013] fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_src4.ximg exists
[Tue May 21 08:30:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_src4.csv
[Tue May 21 08:30:13 2013] fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_src4_1.ximg exists
[Tue May 21 08:30:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_src4.csv
[Tue May 21 08:30:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:13 2013] fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Tue May 21 08:30:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue May 21 08:30:13 2013] fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Tue May 21 08:30:13 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src4.csv
[Tue May 21 08:30:13 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:22 2013] Warning, spatial fit 4 centroid is now closest to src. 2
[Tue May 21 08:30:23 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:30:23 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:30:23 2013] Assessing source extent using major axis lower bound
[Tue May 21 08:30:23 2013] Source does appear to be extended
[Tue May 21 08:30:23 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:43 2013] XMMSAS src. selection expression = ellipse(23784.491080, 32328.465200, 316.916145, 316.916145, 0.000000, X, Y)
[Tue May 21 08:30:43 2013] Not overwriting source region fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_src.reg
[Tue May 21 08:30:43 2013] Extracting stamp from image fullrun_pn_xmm0112940401_pi300-10000_cl_sm2.00.img.gz, (256, 354) - (292, 390)
[Tue May 21 08:30:43 2013] XMMSAS bgd. selection expression = annulus(23784.491080, 32328.465200, 528.193574, 1056.387149, X, Y)
[Tue May 21 08:30:43 2013] Writing fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4.gif
[Tue May 21 08:30:43 2013] ../../xmm0112940401/products/events/fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0112940401/products/events/fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue May 21 08:30:43 2013] Mean detx,y = (4446.37, 5427.59) 
[Tue May 21 08:30:43 2013] ../../xmm0112940401/products/images/fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_src.img and ../../xmm0112940401/products/images/fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue May 21 08:30:43 2013] ../../xmm0112940401/products/spectra/fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0112940401/products/spectra/fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue May 21 08:30:43 2013] Setting source spectrum file to fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 21 08:30:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 21 08:30:43 2013] ../../xmm0112940401/products/lightcurves/fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0112940401/products/lightcurves/fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue May 21 08:30:50 2013] Not generating rmf since there are only 36 counts
[Tue May 21 08:30:50 2013] rmf not generated due to insufficient counts
[Tue May 21 08:30:50 2013] fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Tue May 21 08:46:18 2013] Updating aperture counts using extracted products
[Tue May 21 08:46:18 2013] Total counts from fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 51.00
[Tue May 21 08:46:18 2013] Total counts from fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 77.00
[Tue May 21 08:46:18 2013] Got source and background scale factors 313600.000000, 1967551.000000
[Tue May 21 08:46:18 2013] User source parameters:
  Position = (273.9, 372.1) = 3 15 28.09 -55 10 33.0
  Extent = 5.3 (3.8-7.4)", rotation angle = 0
  Source aperture counts = 38.7 +/- 8.2
  Background aperture counts = 12.3
  Rate = 0.007 +/- 0.001

[Tue May 21 08:46:21 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:46:21 2013] Using photon index=1.80, rate=0.00615, arf fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4.arf
[Tue May 21 08:46:21 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:46:21 2013] Updating source flux to 2.5e-14
[Tue May 21 08:46:30 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 08:46:32 2013] xmm0112940401/analysis//spectral/fullrun_pn_xmm0112940401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete