[Tue May 21 08:29:20 2013] Detection parameters: Position = (199.7, 302.2) = 3 16 5.89 -55 15 35.3 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 56.7 +/- 9.4 Background counts = 3.8 Rate = 0.008 +/- 0.001 [Tue May 21 08:29:20 2013] Off-axis axis estimate = 7.16' [Tue May 21 08:29:44 2013] Using EEF radius (= 10.01 ")to estimate initial spatial extent for simple fitting [Tue May 21 08:29:44 2013] Initial guess for spatial extent in simple fitting = 10.01" [Tue May 21 08:29:44 2013] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.147 [Tue May 21 08:29:44 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 10.01" [Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src3.ximg exists [Tue May 21 08:29:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src3.csv [Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src3_1.ximg exists [Tue May 21 08:29:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src3.csv [Tue May 21 08:29:45 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src3.ximg exists [Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists [Tue May 21 08:29:45 2013] Fit fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly [Tue May 21 08:30:00 2013] Spatial fit model total counts = 95.042600, observed total counts = 91.000000 [Tue May 21 08:30:00 2013] Offset between fit and detection position for source 9 = 0.169599 pixels [Tue May 21 08:30:00 2013] 93.479400 total counts/ 64.014600 bgd. counts: snr = 3.682680 Spatial fit parameters: Offset between fit and detection position for source 9 = 0.169599 pixels Position = (199.7, 302.3) = 3 16 5.87 -55 15 36.1 Extent = 3.3 (2.5-7.0)", rotation angle = 0 Source counts = 29.5 +/- 9.7 Background counts = 64.0 Rate = 0.003 +/- 0.001 [Tue May 21 08:30:00 2013] Vigneting correction estimate = 1.000000 [Tue May 21 08:30:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 21 08:30:00 2013] Assessing source extent using major axis lower bound [Tue May 21 08:30:00 2013] Source does appear to be extended [Tue May 21 08:30:00 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 21 08:30:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Tue May 21 08:30:14 2013] Initial guess for spatial extent in simple fitting = 3.32" [Tue May 21 08:30:14 2013] source mask rpix=0.8, npix_max = 6, mask sum = 9, frac = 1.412 [Tue May 21 08:30:14 2013] Giving source the simple spatial ID 3 for pass 1, mean size = 3.32" [Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src3.ximg exists [Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src3.csv [Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src3_1.ximg exists [Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src3.csv [Tue May 21 08:30:15 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src3_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src3.ximg exists [Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists [Tue May 21 08:30:15 2013] Fit fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly [Tue May 21 08:30:31 2013] Spatial fit model total counts = 91.267300, observed total counts = 91.000000 [Tue May 21 08:30:31 2013] Offset between fit and detection position for source 9 = 0.026764 pixels [Tue May 21 08:30:31 2013] 90.162200 total counts/ 60.292000 bgd. counts: snr = 3.846877 Spatial fit parameters: Offset between fit and detection position for source 9 = 0.026764 pixels Position = (199.7, 302.3) = 3 16 5.87 -55 15 36.3 Extent = 3.4 (2.5-6.6)", rotation angle = 0 Source counts = 29.9 +/- 9.5 Background counts = 60.3 Rate = 0.003 +/- 0.001 [Tue May 21 08:30:31 2013] Vigneting correction estimate = 1.000000 [Tue May 21 08:30:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Tue May 21 08:30:31 2013] Assessing source extent using major axis lower bound [Tue May 21 08:30:31 2013] Source does appear to be extended [Tue May 21 08:30:31 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Tue May 21 08:30:53 2013] XMMSAS src. selection expression = ellipse(17329.540800, 26251.592200, 204.602586, 204.602586, 0.000000, X, Y) [Tue May 21 08:30:53 2013] Not overwriting source region fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_src.reg [Tue May 21 08:30:53 2013] Extracting stamp from image fullrun_mos2_xmm0112940401_pi300-10000_cl_sm2.00.img.gz, (188, 291) - (212, 314) [Tue May 21 08:30:53 2013] XMMSAS bgd. selection expression = annulus(17329.540800, 26251.592200, 341.004310, 682.008620, X, Y) [Tue May 21 08:30:53 2013] Writing fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9.gif [Tue May 21 08:30:53 2013] ../../xmm0112940401/products/events/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_src.evt and ../../xmm0112940401/products/events/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_bgd.evt exist, delete to re-create [Tue May 21 08:30:53 2013] Mean detx,y = (-5919.68, 3204.50) [Tue May 21 08:30:53 2013] ../../xmm0112940401/products/images/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_src.img and ../../xmm0112940401/products/images/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_bgd.img exist, delete to re-create [Tue May 21 08:30:53 2013] ../../xmm0112940401/products/spectra/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_src_b10.pi.gz and ../../xmm0112940401/products/spectra/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_bgd.pi exist, delete to re-create [Tue May 21 08:30:53 2013] Setting source spectrum file to fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Tue May 21 08:30:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_bgd.pi.gz [Tue May 21 08:30:53 2013] ../../xmm0112940401/products/lightcurves/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_src.lc and ../../xmm0112940401/products/lightcurves/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_bgd.lc exist, delete to re-create [Tue May 21 08:44:38 2013] Not generating rmf since there are only 29 counts [Tue May 21 08:44:38 2013] rmf not generated due to insufficient counts [Tue May 21 08:46:23 2013] Updating aperture counts using extracted products [Tue May 21 08:46:23 2013] Total counts from fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 34.00 [Tue May 21 08:46:23 2013] Total counts from fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_bgd.pi.gz = 30.00 [Tue May 21 08:46:23 2013] Got source and background scale factors 131200.000000, 1057028.000000 [Tue May 21 08:46:23 2013] User source parameters: Position = (199.7, 302.3) = 3 16 5.87 -55 15 36.3 Extent = 3.4 (2.5-6.6)", rotation angle = 0 Source aperture counts = 30.3 +/- 6.9 Background aperture counts = 3.7 Rate = 0.003 +/- 0.0007 [Tue May 21 08:46:25 2013] Calculating source flux in energy range 0.30-8.00 [Tue May 21 08:46:25 2013] Using photon index=1.80, rate=0.00305, arf fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9.arf [Tue May 21 08:46:25 2013] Assuming count rate is from the 0.30-10.00 bandpass [Tue May 21 08:46:25 2013] Updating source flux to 7.6e-14 [Tue May 21 08:46:28 2013] Source 9 has fewer than 100.000000 counts, skipping spectral fitting [Tue May 21 08:46:30 2013] xmm0112940401/analysis//spectral/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete