[Tue May 21 08:29:19 2013] Detection parameters:
  Position = (383.0, 315.3) = 3 14 32.63 -55 14 39.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 24.9 +/- 6.3
  Background counts = 3.4
  Rate = 0.004 +/- 0.001

[Tue May 21 08:29:20 2013] Off-axis axis estimate = 6.25'
[Tue May 21 08:29:44 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Tue May 21 08:29:44 2013] Initial guess for spatial extent in simple fitting = 9.55"
[Tue May 21 08:29:44 2013] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.928
[Tue May 21 08:29:44 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 9.55"
[Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src10.ximg exists
[Tue May 21 08:29:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src10.csv
[Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue May 21 08:29:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src10.csv
[Tue May 21 08:29:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue May 21 08:29:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue May 21 08:29:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src10.csv
[Tue May 21 08:29:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:00 2013] Spatial fit model total counts = 53.067400, observed total counts = 46.000000
[Tue May 21 08:30:00 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 08:30:00 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:30:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:30:00 2013] Assessing source extent using major
[Tue May 21 08:30:00 2013] Source does appear to be extended
[Tue May 21 08:30:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:14 2013] Using EEF radius (= 9.55 ")to estimate initial spatial extent for simple fitting
[Tue May 21 08:30:14 2013] Initial guess for spatial extent in simple fitting = 9.55"
[Tue May 21 08:30:14 2013] source mask rpix=2.2, npix_max = 29, mask sum = 27, frac = 0.928
[Tue May 21 08:30:14 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 9.55"
[Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src10.ximg exists
[Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src10.csv
[Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src10_1.ximg exists
[Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src10.csv
[Tue May 21 08:30:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Tue May 21 08:30:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:31 2013] Spatial fit model total counts = 53.067400, observed total counts = 46.000000
[Tue May 21 08:30:31 2013] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 08:30:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:30:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:30:31 2013] Assessing source extent using major
[Tue May 21 08:30:31 2013] Source does appear to be extended
[Tue May 21 08:30:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:53 2013] XMMSAS src. selection expression = ellipse(33271.990234, 27378.770386, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 08:30:53 2013] Not overwriting source region fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src7_src.reg
[Tue May 21 08:30:53 2013] Extracting stamp from image fullrun_mos2_xmm0112940401_pi300-10000_cl_sm2.00.img.gz, (345, 278) - (420, 353)
[Tue May 21 08:30:53 2013] XMMSAS bgd. selection expression = annulus(33271.990234, 27378.770386, 1087.500000, 2175.000000, X, Y)
[Tue May 21 08:30:53 2013] Writing fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src7.gif
[Tue May 21 08:32:23 2013] Mean detx,y = (6223.08, -7198.51) 
[Tue May 21 08:32:24 2013] Setting backscal keywords in source and bgd. spectrum
[Tue May 21 08:32:52 2013] Binned source spectrum to 10 counts/bin
[Tue May 21 08:32:53 2013] Setting source spectrum file to fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Tue May 21 08:32:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue May 21 08:45:09 2013] Not generating rmf since there are only 24 counts
[Tue May 21 08:45:09 2013] rmf not generated due to insufficient counts
[Tue May 21 08:46:24 2013] Updating aperture counts using extracted products
[Tue May 21 08:46:24 2013] Total counts from fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 37.00
[Tue May 21 08:46:24 2013] Total counts from fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src7_bgd.pi.gz = 168.00
[Tue May 21 08:46:24 2013] Got source and background scale factors 1051090.000000, 10008839.000000
[Tue May 21 08:46:24 2013] User source parameters:
  Position = (383.0, 315.3) = 3 14 32.63 -55 14 39.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 19.4 +/- 7.1
  Background aperture counts = 17.6
  Rate = 0.002 +/- 0.0007

[Tue May 21 08:46:24 2013] Updating counts from extracted products
[Tue May 21 08:46:24 2013] Set source signif. to 19.36/4.20 = 4.61
[Tue May 21 08:46:25 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:46:25 2013] Using photon index=1.80, rate=0.00198, arf fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src7.arf
[Tue May 21 08:46:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:46:25 2013] Updating source flux to 3.6e-14
[Tue May 21 08:46:28 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 08:46:30 2013] xmm0112940401/analysis//spectral/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete