[Tue May 21 08:29:20 2013] Detection parameters:
  Position = (169.7, 269.1) = 3 16 21.24 -55 17 59.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.1 +/- 6.8
  Background counts = 3.0
  Rate = 0.005 +/- 0.001

[Tue May 21 08:29:20 2013] Off-axis axis estimate = 9.57'
[Tue May 21 08:29:44 2013] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Tue May 21 08:29:44 2013] Initial guess for spatial extent in simple fitting = 11.22"
[Tue May 21 08:29:44 2013] source mask rpix=2.6, npix_max = 37, mask sum = 33, frac = 0.871
[Tue May 21 08:29:44 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 11.22"
[Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src5.ximg exists
[Tue May 21 08:29:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src5.csv
[Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src5_1.ximg exists
[Tue May 21 08:29:45 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src5.csv
[Tue May 21 08:29:45 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Tue May 21 08:29:45 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Tue May 21 08:29:45 2013] Fit fullrun_mos2_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Tue May 21 08:30:00 2013] Spatial fit model total counts = 47.732200, observed total counts = 43.000000
[Tue May 21 08:30:00 2013] Offset between fit and detection position for source 10 = 0.260312 pixels
[Tue May 21 08:30:00 2013] 48.256400 total counts/ 25.729300 bgd. counts: snr = 4.441108
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.260312 pixels
  Position = (169.9, 269.0) = 3 16 21.12 -55 18 0.8
  Extent = 6.1 (3.1-9.3)", rotation angle = 0
  Source counts = 22.5 +/- 6.9
  Background counts = 25.7
  Rate = 0.002 +/- 0.0007
[Tue May 21 08:30:00 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:30:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:30:00 2013] Assessing source extent using major axis lower bound
[Tue May 21 08:30:00 2013] Source does appear to be extended
[Tue May 21 08:30:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 08:30:14 2013] Initial guess for spatial extent in simple fitting = 6.13"
[Tue May 21 08:30:14 2013] source mask rpix=1.4, npix_max = 14, mask sum = 15, frac = 1.028
[Tue May 21 08:30:14 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 6.13"
[Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src5.ximg exists
[Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src5.csv
[Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src5_1.ximg exists
[Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src5.csv
[Tue May 21 08:30:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 21 08:30:15 2013] fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Tue May 21 08:30:15 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src5.csv
[Tue May 21 08:30:15 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:31 2013] Spatial fit model total counts = 48.080500, observed total counts = 43.000000
[Tue May 21 08:30:31 2013] Offset between fit and detection position for source 10 = 0.014004 pixels
[Tue May 21 08:30:31 2013] 48.454500 total counts/ 25.720100 bgd. counts: snr = 4.482777
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.014004 pixels
  Position = (169.9, 269.0) = 3 16 21.11 -55 18 0.8
  Extent = 6.2 (3.2-9.4)", rotation angle = 0
  Source counts = 22.7 +/- 7.0
  Background counts = 25.7
  Rate = 0.002 +/- 0.0007
[Tue May 21 08:30:31 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:30:31 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:30:31 2013] Assessing source extent using major axis lower bound
[Tue May 21 08:30:31 2013] Source does appear to be extended
[Tue May 21 08:30:31 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:53 2013] XMMSAS src. selection expression = ellipse(14735.335880, 23351.437800, 369.684416, 369.684416, 0.000000, X, Y)
[Tue May 21 08:30:53 2013] Not overwriting source region fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_src.reg
[Tue May 21 08:30:53 2013] Extracting stamp from image fullrun_mos2_xmm0112940401_pi300-10000_cl_sm2.00.img.gz, (149, 248) - (191, 290)
[Tue May 21 08:30:53 2013] XMMSAS bgd. selection expression = annulus(14735.335880, 23351.437800, 616.140694, 1232.281388, X, Y)
[Tue May 21 08:30:53 2013] Writing fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10.gif
[Tue May 21 08:30:53 2013] ../../xmm0112940401/products/events/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0112940401/products/events/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue May 21 08:30:53 2013] Mean detx,y = (-6309.78, 7077.59) 
[Tue May 21 08:30:53 2013] ../../xmm0112940401/products/images/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_src.img and ../../xmm0112940401/products/images/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue May 21 08:30:53 2013] ../../xmm0112940401/products/spectra/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0112940401/products/spectra/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue May 21 08:30:53 2013] Setting source spectrum file to fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 21 08:30:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue May 21 08:30:53 2013] ../../xmm0112940401/products/lightcurves/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0112940401/products/lightcurves/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue May 21 08:44:47 2013] Not generating rmf since there are only 22 counts
[Tue May 21 08:44:47 2013] rmf not generated due to insufficient counts
[Tue May 21 08:46:23 2013] Updating aperture counts using extracted products
[Tue May 21 08:46:23 2013] Total counts from fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 27.00
[Tue May 21 08:46:23 2013] Total counts from fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.pi.gz = 55.00
[Tue May 21 08:46:23 2013] Got source and background scale factors 400204.000000, 3126045.000000
[Tue May 21 08:46:23 2013] User source parameters:
  Position = (169.9, 269.0) = 3 16 21.11 -55 18 0.8
  Extent = 6.2 (3.2-9.4)", rotation angle = 0
  Source aperture counts = 20.0 +/- 6.3
  Background aperture counts = 7.0
  Rate = 0.002 +/- 0.0006

[Tue May 21 08:46:25 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:46:25 2013] Using photon index=1.80, rate=0.00232, arf fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10.arf
[Tue May 21 08:46:25 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:46:25 2013] Updating source flux to 5.5e-14
[Tue May 21 08:46:28 2013] Source 10 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 08:46:30 2013] xmm0112940401/analysis//spectral/fullrun_mos2_xmm0112940401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete