[Tue May 21 08:29:18 2013] Detection parameters:
  Position = (235.9, 271.3) = 3 15 47.49 -55 17 54.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31.2 +/- 7.5
  Background counts = 3.7
  Rate = 0.004 +/- 0.001

[Tue May 21 08:29:19 2013] Off-axis axis estimate = 4.94'
[Tue May 21 08:29:44 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Tue May 21 08:29:44 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Tue May 21 08:29:44 2013] source mask rpix=2.0, npix_max = 25, mask sum = 13, frac = 0.501
[Tue May 21 08:29:44 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 8.90"
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src7.ximg exists
[Tue May 21 08:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src7.csv
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src7_1.ximg exists
[Tue May 21 08:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src7.csv
[Tue May 21 08:29:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Tue May 21 08:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Tue May 21 08:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src7.csv
[Tue May 21 08:29:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:29:56 2013] Spatial fit model total counts = 134.809000, observed total counts = 111.000000
[Tue May 21 08:29:56 2013] Poor agreement between spatial fit and data for source 8
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue May 21 08:29:56 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:29:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:29:56 2013] Assessing source extent using major
[Tue May 21 08:29:56 2013] Source does appear to be extended
[Tue May 21 08:29:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:14 2013] Using EEF radius (= 8.90 ")to estimate initial spatial extent for simple fitting
[Tue May 21 08:30:14 2013] Initial guess for spatial extent in simple fitting = 8.90"
[Tue May 21 08:30:14 2013] source mask rpix=2.0, npix_max = 25, mask sum = 13, frac = 0.501
[Tue May 21 08:30:14 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 8.90"
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src7.ximg exists
[Tue May 21 08:30:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src7.csv
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src7_1.ximg exists
[Tue May 21 08:30:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src7.csv
[Tue May 21 08:30:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Tue May 21 08:30:14 2013] Fit fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Tue May 21 08:30:26 2013] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 147.869015 pixels away
[Tue May 21 08:30:26 2013] Warning: source 7 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 8 at 11.125231 pixels away
[Tue May 21 08:30:26 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:30:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:30:26 2013] Assessing source extent using major
[Tue May 21 08:30:26 2013] Source does appear to be extended
[Tue May 21 08:30:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:50 2013] XMMSAS src. selection expression = ellipse(20477.909836, 23553.228943, 652.500000, 652.500000, 0.000000, X, Y)
[Tue May 21 08:30:50 2013] Not overwriting source region fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_src.reg
[Tue May 21 08:30:50 2013] Extracting stamp from image fullrun_mos1_xmm0112940401_pi300-10000_cl_sm2.00.img.gz, (198, 234) - (273, 309)
[Tue May 21 08:30:50 2013] XMMSAS bgd. selection expression = annulus(20477.909836, 23553.228943, 1087.500000, 2175.000000, X, Y)
[Tue May 21 08:30:50 2013] Writing fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8.gif
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/events/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_src.evt and ../../xmm0112940401/products/events/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_bgd.evt exist, delete to re-create
[Tue May 21 08:30:50 2013] Mean detx,y = (3957.13, 1676.30) 
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/images/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_src.img and ../../xmm0112940401/products/images/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_bgd.img exist, delete to re-create
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/spectra/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_src_b10.pi.gz and ../../xmm0112940401/products/spectra/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_bgd.pi exist, delete to re-create
[Tue May 21 08:30:50 2013] Setting source spectrum file to fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Tue May 21 08:30:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/lightcurves/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_src.lc and ../../xmm0112940401/products/lightcurves/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_bgd.lc exist, delete to re-create
[Tue May 21 08:30:53 2013] Not generating rmf since there are only 31 counts
[Tue May 21 08:30:53 2013] rmf not generated due to insufficient counts
[Tue May 21 08:30:53 2013] fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8.arf exists, delete to re-create
[Tue May 21 08:46:22 2013] Updating aperture counts using extracted products
[Tue May 21 08:46:22 2013] Total counts from fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 91.00
[Tue May 21 08:46:22 2013] Total counts from fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_bgd.pi.gz = 179.00
[Tue May 21 08:46:22 2013] Got source and background scale factors 1157324.000000, 10499824.000000
[Tue May 21 08:46:22 2013] User source parameters:
  Position = (235.9, 271.3) = 3 15 47.49 -55 17 54.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 71.3 +/- 10.6
  Background aperture counts = 19.7
  Rate = 0.007 +/- 0.001

[Tue May 21 08:46:22 2013] Updating counts from extracted products
[Tue May 21 08:46:22 2013] Set source signif. to 71.27/4.44 = 16.05
[Tue May 21 08:46:23 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:46:23 2013] Using photon index=1.80, rate=0.00728, arf fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8.arf
[Tue May 21 08:46:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:46:23 2013] Updating source flux to 8.4e-14
[Tue May 21 08:46:27 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue May 21 08:46:28 2013] xmm0112940401/analysis//spectral/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete