[Tue May 21 08:29:18 2013] Detection parameters:
  Position = (111.6, 363.0) = 3 16 50.55 -55 11 10.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.1 +/- 9.1
  Background counts = 2.9
  Rate = 0.005 +/- 0.0009

[Tue May 21 08:29:19 2013] Off-axis axis estimate = 14.33'
[Tue May 21 08:29:44 2013] Using EEF radius (= 13.59 ")to estimate initial spatial extent for simple fitting
[Tue May 21 08:29:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 08:29:44 2013] Initial guess for spatial extent in simple fitting = 13.59"
[Tue May 21 08:29:44 2013] source mask rpix=3.1, npix_max = 52, mask sum = 54, frac = 1.027
[Tue May 21 08:29:44 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 13.59"
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src6.ximg exists
[Tue May 21 08:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src6.csv
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue May 21 08:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src6.csv
[Tue May 21 08:29:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue May 21 08:29:44 2013] Fit fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Tue May 21 08:29:56 2013] Spatial fit model total counts = 82.512500, observed total counts = 80.000000
[Tue May 21 08:29:56 2013] Offset between fit and detection position for source 4 = 0.109339 pixels
[Tue May 21 08:29:56 2013] 83.065500 total counts/ 49.823600 bgd. counts: snr = 4.709429
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.109339 pixels
  Position = (111.7, 362.9) = 3 16 50.51 -55 11 10.8
  Extent = 5.1 (3.9-6.6)", rotation angle = 0
  Source counts = 33.2 +/- 9.1
  Background counts = 49.8
  Rate = 0.003 +/- 0.0009
[Tue May 21 08:29:56 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:29:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:29:56 2013] Assessing source extent using major axis lower bound
[Tue May 21 08:29:56 2013] Source does appear to be extended
[Tue May 21 08:29:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 08:30:14 2013] Initial guess for spatial extent in simple fitting = 5.14"
[Tue May 21 08:30:14 2013] source mask rpix=1.2, npix_max = 11, mask sum = 12, frac = 1.060
[Tue May 21 08:30:14 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 5.14"
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src6.ximg exists
[Tue May 21 08:30:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src6.csv
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src6_1.ximg exists
[Tue May 21 08:30:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src6.csv
[Tue May 21 08:30:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Tue May 21 08:30:14 2013] Fit fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Tue May 21 08:30:26 2013] Spatial fit model total counts = 72.281800, observed total counts = 69.000000
[Tue May 21 08:30:26 2013] Offset between fit and detection position for source 4 = 0.063480 pixels
[Tue May 21 08:30:26 2013] 72.796400 total counts/ 40.806500 bgd. counts: snr = 5.007814
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.063480 pixels
  Position = (111.7, 362.9) = 3 16 50.52 -55 11 11.1
  Extent = 4.8 (3.7-6.4)", rotation angle = 0
  Source counts = 32.0 +/- 8.5
  Background counts = 40.8
  Rate = 0.003 +/- 0.0009
[Tue May 21 08:30:26 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:30:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:30:26 2013] Assessing source extent using major axis lower bound
[Tue May 21 08:30:26 2013] Source does appear to be extended
[Tue May 21 08:30:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:50 2013] XMMSAS src. selection expression = ellipse(9667.151400, 31521.484200, 289.691408, 289.691408, 0.000000, X, Y)
[Tue May 21 08:30:50 2013] Not overwriting source region fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_src.reg
[Tue May 21 08:30:50 2013] Extracting stamp from image fullrun_mos1_xmm0112940401_pi300-10000_cl_sm2.00.img.gz, (95, 346) - (128, 380)
[Tue May 21 08:30:50 2013] XMMSAS bgd. selection expression = annulus(9667.151400, 31521.484200, 482.819014, 965.638028, X, Y)
[Tue May 21 08:30:50 2013] Writing fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4.gif
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/events/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_src.evt and ../../xmm0112940401/products/events/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.evt exist, delete to re-create
[Tue May 21 08:30:50 2013] Mean detx,y = (3625.66, 15065.71) 
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/images/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_src.img and ../../xmm0112940401/products/images/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.img exist, delete to re-create
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/spectra/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz and ../../xmm0112940401/products/spectra/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.pi exist, delete to re-create
[Tue May 21 08:30:50 2013] Setting source spectrum file to fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Tue May 21 08:30:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/lightcurves/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_src.lc and ../../xmm0112940401/products/lightcurves/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.lc exist, delete to re-create
[Tue May 21 08:30:53 2013] Not generating rmf since there are only 31 counts
[Tue May 21 08:30:53 2013] rmf not generated due to insufficient counts
[Tue May 21 08:30:53 2013] fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4.arf exists, delete to re-create
[Tue May 21 08:46:22 2013] Updating aperture counts using extracted products
[Tue May 21 08:46:22 2013] Total counts from fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 38.00
[Tue May 21 08:46:22 2013] Total counts from fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_bgd.pi.gz = 42.00
[Tue May 21 08:46:22 2013] Got source and background scale factors 263920.000000, 1770316.000000
[Tue May 21 08:46:22 2013] User source parameters:
  Position = (111.7, 362.9) = 3 16 50.52 -55 11 11.1
  Extent = 4.8 (3.7-6.4)", rotation angle = 0
  Source aperture counts = 31.7 +/- 7.2
  Background aperture counts = 6.3
  Rate = 0.003 +/- 0.0007

[Tue May 21 08:46:23 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:46:23 2013] Using photon index=1.80, rate=0.00327, arf fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4.arf
[Tue May 21 08:46:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:46:23 2013] Updating source flux to 9.6e-14
[Tue May 21 08:46:27 2013] Source 4 has fewer than 100.000000 counts, skipping spectral fitting
[Tue May 21 08:46:28 2013] xmm0112940401/analysis//spectral/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete