[Tue May 21 08:29:19 2013] Detection parameters:
  Position = (236.0, 117.1) = 3 15 47.62 -55 29 2.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 239.6 +/- 18.6
  Background counts = 3.2
  Rate = 0.02 +/- 0.002

[Tue May 21 08:29:19 2013] Off-axis axis estimate = 13.91'
[Tue May 21 08:29:44 2013] Using EEF radius (= 13.38 ")to estimate initial spatial extent for simple fitting
[Tue May 21 08:29:44 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue May 21 08:29:44 2013] Initial guess for spatial extent in simple fitting = 13.38"
[Tue May 21 08:29:44 2013] source mask rpix=3.1, npix_max = 51, mask sum = 56, frac = 1.095
[Tue May 21 08:29:44 2013] Giving source the simple spatial ID 1 for pass 0, mean size = 13.38"
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src1.ximg exists
[Tue May 21 08:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src1.csv
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue May 21 08:29:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src1.csv
[Tue May 21 08:29:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue May 21 08:29:44 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue May 21 08:29:44 2013] Fit fullrun_mos1_xmm0112940401_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue May 21 08:29:56 2013] Spatial fit model total counts = 289.248000, observed total counts = 266.000000
[Tue May 21 08:29:56 2013] Offset between fit and detection position for source 10 = 0.300835 pixels
[Tue May 21 08:29:56 2013] 290.534000 total counts/ 120.295000 bgd. counts: snr = 15.521557
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 0.300835 pixels
  Position = (236.3, 117.1) = 3 15 47.47 -55 29 2.0
  Extent = 6.0 (5.2-6.7)", rotation angle = 0
  Source counts = 170.2 +/- 17.0
  Background counts = 120.3
  Rate = 0.02 +/- 0.002
[Tue May 21 08:29:56 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:29:56 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:29:56 2013] Assessing source extent using major axis lower bound
[Tue May 21 08:29:56 2013] Source does appear to be extended
[Tue May 21 08:29:56 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:14 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue May 21 08:30:14 2013] Initial guess for spatial extent in simple fitting = 6.00"
[Tue May 21 08:30:14 2013] source mask rpix=1.4, npix_max = 14, mask sum = 16, frac = 1.132
[Tue May 21 08:30:14 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 6.00"
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src1.ximg exists
[Tue May 21 08:30:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src1.csv
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue May 21 08:30:14 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src1.csv
[Tue May 21 08:30:14 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue May 21 08:30:14 2013] fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue May 21 08:30:14 2013] Fit fullrun_mos1_xmm0112940401_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue May 21 08:30:26 2013] Warning, spatial fit 1 centroid is now closest to src. 8
[Tue May 21 08:30:26 2013] Vigneting correction estimate = 1.000000
[Tue May 21 08:30:26 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue May 21 08:30:26 2013] Assessing source extent using major axis lower bound
[Tue May 21 08:30:26 2013] Source does appear to be extended
[Tue May 21 08:30:26 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Tue May 21 08:30:50 2013] XMMSAS src. selection expression = ellipse(20505.735800, 10143.350800, 360.228010, 360.228010, 0.000000, X, Y)
[Tue May 21 08:30:50 2013] Not overwriting source region fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_src.reg
[Tue May 21 08:30:50 2013] Extracting stamp from image fullrun_mos1_xmm0112940401_pi300-10000_cl_sm2.00.img.gz, (216, 96) - (257, 138)
[Tue May 21 08:30:50 2013] XMMSAS bgd. selection expression = annulus(20505.735800, 10143.350800, 600.380017, 1200.760035, X, Y)
[Tue May 21 08:30:50 2013] Writing fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10.gif
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/events/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_src.evt and ../../xmm0112940401/products/events/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.evt exist, delete to re-create
[Tue May 21 08:30:50 2013] Mean detx,y = (14525.89, -6286.46) 
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/images/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_src.img and ../../xmm0112940401/products/images/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.img exist, delete to re-create
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/spectra/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_src_b10.pi.gz and ../../xmm0112940401/products/spectra/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.pi exist, delete to re-create
[Tue May 21 08:30:50 2013] Setting source spectrum file to fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_src_b10.pi.gz
[Tue May 21 08:30:50 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Tue May 21 08:30:50 2013] ../../xmm0112940401/products/lightcurves/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_src.lc and ../../xmm0112940401/products/lightcurves/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.lc exist, delete to re-create
[Tue May 21 08:30:53 2013] fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10.rmf exists, delete to re-create
[Tue May 21 08:30:53 2013] fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10.arf exists, delete to re-create
[Tue May 21 08:46:21 2013] Updating aperture counts using extracted products
[Tue May 21 08:46:21 2013] Total counts from fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_src_b10.pi.gz = 175.00
[Tue May 21 08:46:21 2013] Total counts from fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_bgd.pi.gz = 48.00
[Tue May 21 08:46:21 2013] Got source and background scale factors 409600.000000, 2519956.000000
[Tue May 21 08:46:21 2013] User source parameters:
  Position = (236.3, 117.1) = 3 15 47.47 -55 29 2.0
  Extent = 6.0 (5.2-6.7)", rotation angle = 0
  Source aperture counts = 167.2 +/- 14.3
  Background aperture counts = 7.8
  Rate = 0.02 +/- 0.001

[Tue May 21 08:46:23 2013] Calculating source flux in energy range 0.30-8.00
[Tue May 21 08:46:23 2013] Using photon index=1.80, rate=0.0174, arf fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10.arf
[Tue May 21 08:46:23 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue May 21 08:46:23 2013] Updating source flux to 5.8e-13
[Tue May 21 08:46:28 2013] xmm0112940401/analysis//spectral/fullrun_mos1_xmm0112940401_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete