[Mon Aug 27 22:42:15 2012] Detection parameters:
  Position = (308.3, 340.6) = 3 15 46.93 -55 17 54.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 23.5 +/- 7.3
  Background counts = 6.8
  Rate = 0.003 +/- 0.0009

[Mon Aug 27 22:42:15 2012] Off-axis axis estimate = 3.14'
[Mon Aug 27 23:08:43 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 23:08:43 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Mon Aug 27 23:08:43 2012] source mask rpix=1.8, npix_max = 21, mask sum = 23, frac = 1.051
[Mon Aug 27 23:08:43 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 8.00"
[Mon Aug 27 23:21:46 2012] fullrun_mos2_xmm0112940201_pi300-10000_cl_pass0_src9.ximg exists
[Mon Aug 27 23:21:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940201_pi300-10000_cl_pass0_src9.csv
[Mon Aug 27 23:21:46 2012] fullrun_mos2_xmm0112940201_pi300-10000_cl_pass0_src9_1.ximg exists
[Mon Aug 27 23:21:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940201_pi300-10000_cl_pass0_src9.csv
[Mon Aug 27 23:21:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Aug 27 23:21:46 2012] fullrun_mos2_xmm0112940201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Mon Aug 27 23:21:46 2012] fullrun_mos2_xmm0112940201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Mon Aug 27 23:21:46 2012] Fit fullrun_mos2_xmm0112940201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Mon Aug 27 23:21:53 2012] Source 7 is offset by -1.890504 and -3.582307 pixels which is larger than
2 X fitted extent = 0.899071 x 0.899071, not incorporating fit results
[Mon Aug 27 23:21:53 2012] Source 7 is offset by -4.849447 and -8.117939 pixels which is larger than
2 X fitted extent = 7.355081 x 7.355081, not incorporating fit results
[Mon Aug 27 23:21:53 2012] Vigneting correction estimate = 1.000000
[Mon Aug 27 23:21:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Aug 27 23:21:53 2012] Assessing source extent using major
[Mon Aug 27 23:21:53 2012] Source does appear to be extended
[Mon Aug 27 23:21:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Aug 27 23:21:53 2012] Source is confused with source 3
[Mon Aug 27 23:49:07 2012] Using EEF radius (= 8.00 ")to estimate initial spatial extent for simple fitting
[Mon Aug 27 23:49:07 2012] Initial guess for spatial extent in simple fitting = 8.00"
[Mon Aug 27 23:49:07 2012] source mask rpix=1.8, npix_max = 21, mask sum = 23, frac = 1.051
[Mon Aug 27 23:49:07 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 8.00"
[Tue Aug 28 00:03:01 2012] fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_src9.ximg exists
[Tue Aug 28 00:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_src9.csv
[Tue Aug 28 00:03:01 2012] fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_src9_1.ximg exists
[Tue Aug 28 00:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_src9.csv
[Tue Aug 28 00:03:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 00:03:01 2012] fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Tue Aug 28 00:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Aug 28 00:03:01 2012] fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Tue Aug 28 00:03:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Tue Aug 28 00:03:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112940201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 00:03:08 2012] Warning: source 9 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 11.251042 pixels away
[Tue Aug 28 00:03:08 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 00:03:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 00:03:08 2012] Assessing source extent using major
[Tue Aug 28 00:03:08 2012] Source does appear to be extended
[Tue Aug 28 00:03:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 00:09:04 2012] XMMSAS src. selection expression = ellipse(26773.782135, 29584.595276, 652.500000, 652.500000, 0.000000, X, Y)
[Tue Aug 28 00:09:04 2012] Writing source region out to fullrun_mos2_xmm0112940201_pi300-10000_pass1_cl_src7_src.reg
[Tue Aug 28 00:09:04 2012] Extracting stamp from image fullrun_mos2_xmm0112940201_pi300-10000_cl_sm2.00.img.gz, (271, 303) - (346, 378)
[Tue Aug 28 00:09:04 2012] XMMSAS bgd. selection expression = annulus(26773.782135, 29584.595276, 1087.500000, 2175.000000, X, Y) && !ellipse(26385.527600, 29359.721600, 620.583218, 367.455211, 242.491000, X, Y)
[Tue Aug 28 00:09:04 2012] Writing fullrun_mos2_xmm0112940201_pi300-10000_pass1_cl_src7.gif
[Tue Aug 28 00:10:29 2012] Mean detx,y = (-351.04, -4822.82) 
[Tue Aug 28 00:10:30 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 00:10:48 2012] grppha failed
[Tue Aug 28 00:10:48 2012] Setting source spectrum file to fullrun_mos2_xmm0112940201_pi300-10000_pass1_cl_src7_src.pi.gz
[Tue Aug 28 00:10:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112940201_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Aug 28 00:11:02 2012] Not generating rmf since there are only 23 counts
[Tue Aug 28 00:11:02 2012] rmf not generated due to insufficient counts
[Tue Aug 28 00:11:11 2012] Updating aperture counts using extracted products
[Tue Aug 28 00:11:11 2012] Error reading totcts from fullrun_mos2_xmm0112940201_pi300-10000_pass1_cl_src7_src.pi.gz
[Tue Aug 28 00:11:11 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 00:11:13 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Aug 28 00:11:14 2012] xmm0112940201/analysis//spectral/fullrun_mos2_xmm0112940201_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete