[Wed Sep  5 00:05:22 2012] Detection parameters:
  Position = (342.1, 374.2) = 9 6 23.10 -51 59 56.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.1 +/- 20.4
  Background counts = 209.8
  Rate = 0.003 +/- 0.0006

[Wed Sep  5 00:05:23 2012] Off-axis axis estimate = 6.34'
[Wed Sep  5 00:07:59 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 00:07:59 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Wed Sep  5 00:07:59 2012] source mask rpix=2.2, npix_max = 29, mask sum = 35, frac = 1.195
[Wed Sep  5 00:07:59 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 9.60"
[Wed Sep  5 01:24:28 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src9.ximg exists
[Wed Sep  5 01:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src9.csv
[Wed Sep  5 01:24:28 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src9_1.ximg exists
[Wed Sep  5 01:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src9.csv
[Wed Sep  5 01:24:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 01:24:28 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Wed Sep  5 01:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Sep  5 01:24:28 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Wed Sep  5 01:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src9.csv
[Wed Sep  5 01:24:28 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 02:45:08 2012] Warning, spatial fit 9 centroid is now closest to src. 14
[Wed Sep  5 02:45:08 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 02:45:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 02:45:08 2012] Assessing source extent using major
[Wed Sep  5 02:45:08 2012] Source does appear to be extended
[Wed Sep  5 02:45:08 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 02:45:08 2012] Source is confused with source 11
[Wed Sep  5 02:45:08 2012] Source is confused with source 13
[Wed Sep  5 02:45:24 2012] Using EEF radius (= 9.60 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 02:45:24 2012] Initial guess for spatial extent in simple fitting = 9.60"
[Wed Sep  5 02:45:24 2012] source mask rpix=2.2, npix_max = 29, mask sum = 35, frac = 1.195
[Wed Sep  5 02:45:24 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 9.60"
[Wed Sep  5 04:19:29 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Sep  5 04:19:29 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Sep  5 04:19:29 2012] Fit fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_src7 appears to have run properly
[Wed Sep  5 04:19:30 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Sep  5 04:19:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Sep  5 04:19:30 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Sep  5 04:19:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Sep  5 04:19:30 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:48:00 2012] Spatial fit model total counts = 628.293000, observed total counts = 572.000000
[Wed Sep  5 05:48:00 2012] Offset between fit and detection position for source 10 = 9.589606 pixels
[Wed Sep  5 05:48:00 2012] 594.072200 total counts/ 75.434200 bgd. counts: snr = 59.714554
Spatial fit parameters:
  Offset between fit and detection position for source 10 = 9.589606 pixels
  Position = (334.6, 380.2) = 9 6 26.65 -51 59 35.4
  Extent = 31.5" x 21.0", rotation angle = 50
  Source counts = 518.6 +/- 24.4
  Background counts = 75.4
  Rate = 0.03 +/- 0.001
[Wed Sep  5 05:48:00 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 05:48:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 05:48:00 2012] Assessing source extent using major
[Wed Sep  5 05:48:00 2012] Source does appear to be extended
[Wed Sep  5 05:48:00 2012] Computing asymmetry using major and minor axis, asym = 1.50
[Wed Sep  5 05:48:15 2012] XMMSAS src. selection expression = ellipse(29060.206284, 33024.817728, 1889.073988, 1261.502386, 50.289063, X, Y)
[Wed Sep  5 05:48:15 2012] Writing source region out to fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src10_src.reg
[Wed Sep  5 05:48:15 2012] Extracting stamp from image fullrun_pn_xmm0112930101_pi300-10000_cl_sm2.00.img.gz, (226, 272) - (443, 489)
[Wed Sep  5 05:48:15 2012] XMMSAS bgd. selection expression = annulus(29060.206284, 33024.817728, 3148.456647, 6296.913294, X, Y) && !ellipse(34795.000000, 27276.602203, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24584.128200, 34503.470700, 1604.080046, 1604.080046, 0.000000, X, Y) && !ellipse(27584.414000, 32822.268000, 1520.432044, 1520.432044, 0.000000, X, Y) && !ellipse(29172.328000, 32466.610000, 1522.080044, 1522.080044, 0.000000, X, Y) && !ellipse(27970.679962, 32503.521210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29431.622000, 32036.998000, 3044.160088, 1598.000046, 41.882000, X, Y) && !ellipse(30061.528809, 31452.315460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30079.898956, 31031.103027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31961.470600, 30453.630000, 1011.936029, 1011.936029, 0.000000, X, Y) && !ellipse(31190.694183, 31117.319794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28781.848000, 30249.575000, 1182.968034, 1182.968034, 0.000000, X, Y) && !ellipse(31828.161407, 29980.109680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32138.491852, 29574.439789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22671.072060, 29138.061200, 426.864812, 426.864812, 0.000000, X, Y) && !ellipse(31510.657074, 27879.519531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31415.612335, 27265.907745, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep  5 05:48:15 2012] Writing fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src10.gif
[Wed Sep  5 05:53:54 2012] Mean detx,y = (-6398.12, 6450.71) 
[Wed Sep  5 05:53:56 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 05:54:54 2012] grppha failed
[Wed Sep  5 05:54:54 2012] Setting source spectrum file to fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src10_src.pi.gz
[Wed Sep  5 05:54:54 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src10_bgd.pi.gz
[Wed Sep  5 06:22:31 2012] Updating aperture counts using extracted products
[Wed Sep  5 06:22:31 2012] Error reading totcts from fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src10_src.pi.gz
[Wed Sep  5 06:22:31 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 06:22:35 2012] Flag c found in src. 10 procflags, skipping spectral fitting
[Wed Sep  5 06:22:35 2012] Source 10 has no response, skipping
[Wed Sep  5 06:22:36 2012] xmm0112930101/analysis//spectral/fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src10_pl.csv not found, spectral fit skipped or did not complete