[Wed Sep 5 00:05:22 2012] Detection parameters: Position = (400.5, 314.1) = 9 5 55.51 -52 4 45.2 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 2208.6 +/- 481.5 Background counts = 200.5 Rate = 0.07 +/- 0.02 [Wed Sep 5 00:05:23 2012] Off-axis axis estimate = 7.49' [Wed Sep 5 00:07:59 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 00:07:59 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Sep 5 00:07:59 2012] Initial guess for spatial extent in simple fitting = 10.17" [Wed Sep 5 00:07:59 2012] source mask rpix=2.3, npix_max = 32, mask sum = 17, frac = 0.528 [Wed Sep 5 00:07:59 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 10.17" [Wed Sep 5 01:24:27 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src1.ximg exists [Wed Sep 5 01:24:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src1.csv [Wed Sep 5 01:24:27 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src1_1.ximg exists [Wed Sep 5 01:24:27 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src1.csv [Wed Sep 5 01:24:27 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 01:24:28 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Wed Sep 5 01:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed Sep 5 01:24:28 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Wed Sep 5 01:24:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src1.csv [Wed Sep 5 01:24:28 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 02:45:08 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 1 at 10.240800 pixels away [Wed Sep 5 02:45:08 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 02:45:08 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 02:45:08 2012] Assessing source extent using major [Wed Sep 5 02:45:08 2012] Source does appear to be extended [Wed Sep 5 02:45:08 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 02:45:24 2012] Using EEF radius (= 10.17 ")to estimate initial spatial extent for simple fitting [Wed Sep 5 02:45:24 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Sep 5 02:45:24 2012] Initial guess for spatial extent in simple fitting = 10.17" [Wed Sep 5 02:45:24 2012] source mask rpix=2.3, npix_max = 32, mask sum = 17, frac = 0.528 [Wed Sep 5 02:45:24 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 10.17" [Wed Sep 5 04:19:29 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_src1.ximg exists [Wed Sep 5 04:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_src1.csv [Wed Sep 5 04:19:29 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_src1_1.ximg exists [Wed Sep 5 04:19:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_src1.csv [Wed Sep 5 04:19:29 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 04:19:30 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Wed Sep 5 04:19:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Sep 5 04:19:30 2012] fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Wed Sep 5 04:19:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src1.csv [Wed Sep 5 04:19:30 2012] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Sep 5 05:48:00 2012] Source 1 is offset by 2.133467 and 0.547722 pixels which is larger than 2 X fitted extent = 1.614253 x 1.614253, not incorporating fit results [Wed Sep 5 05:48:00 2012] Vigneting correction estimate = 1.000000 [Wed Sep 5 05:48:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Sep 5 05:48:00 2012] Assessing source extent using major [Wed Sep 5 05:48:00 2012] Source does appear to be extended [Wed Sep 5 05:48:00 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Sep 5 05:48:15 2012] Counts = 2208.565674, rescaling region sizes by 2.000000 [Wed Sep 5 05:48:15 2012] XMMSAS src. selection expression = ellipse(34795.000000, 27276.602203, 1305.000000, 1305.000000, 0.000000, X, Y) [Wed Sep 5 05:48:15 2012] Writing source region out to fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src1_src.reg [Wed Sep 5 05:48:15 2012] Extracting stamp from image fullrun_pn_xmm0112930101_pi300-10000_cl_sm2.00.img.gz, (326, 239) - (476, 389) [Wed Sep 5 05:48:15 2012] XMMSAS bgd. selection expression = annulus(34795.000000, 27276.602203, 4350.000000, 8700.000000, X, Y) && !ellipse(24584.128200, 34503.470700, 1604.080046, 1604.080046, 0.000000, X, Y) && !ellipse(31814.469421, 24393.333313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27584.414000, 32822.268000, 1520.432044, 1520.432044, 0.000000, X, Y) && !ellipse(29060.206284, 33024.817728, 2518.765318, 1682.003181, 50.289063, X, Y) && !ellipse(29172.328000, 32466.610000, 1522.080044, 1522.080044, 0.000000, X, Y) && !ellipse(27970.679962, 32503.521210, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29431.622000, 32036.998000, 3044.160088, 1598.000046, 41.882000, X, Y) && !ellipse(30061.528809, 31452.315460, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30079.898956, 31031.103027, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31961.470600, 30453.630000, 1011.936029, 1011.936029, 0.000000, X, Y) && !ellipse(31190.694183, 31117.319794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28781.848000, 30249.575000, 1182.968034, 1182.968034, 0.000000, X, Y) && !ellipse(31828.161407, 29980.109680, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32138.491852, 29574.439789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31510.657074, 27879.519531, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31415.612335, 27265.907745, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32309.818237, 25348.594269, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32347.360352, 24927.865051, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32790.296234, 24661.209839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32892.913116, 24164.836182, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31329.961400, 21469.059000, 2968.688085, 1184.376034, 43.648000, X, Y) && !ellipse(32414.410000, 21029.294000, 2875.760083, 2875.760083, 0.000000, X, Y) && !ellipse(26588.732200, 17477.332000, 1597.144046, 1597.144046, 0.000000, X, Y) && !ellipse(32196.680000, 20476.636000, 1579.256045, 1579.256045, 0.000000, X, Y) && !ellipse(32091.022000, 20386.678800, 1291.056037, 1291.056037, 0.000000, X, Y) && !ellipse(32208.860000, 20222.974000, 1602.848046, 1602.848046, 0.000000, X, Y) && !ellipse(31793.943390, 19618.863159, 870.000000, 870.000000, 0.000000, X, Y) [Wed Sep 5 05:48:15 2012] Writing fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src1.gif [Wed Sep 5 05:48:21 2012] Mean detx,y = (-9634.69, -761.36) [Wed Sep 5 05:48:23 2012] Setting backscal keywords in source and bgd. spectrum [Wed Sep 5 05:49:42 2012] grppha failed [Wed Sep 5 05:49:43 2012] Setting source spectrum file to fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src1_src.pi.gz [Wed Sep 5 05:49:43 2012] Setting bgd. spectrum file to fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src1_bgd.pi.gz [Wed Sep 5 06:08:07 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Wed Sep 5 06:08:07 2012] rmf not generated due to insufficient counts [Wed Sep 5 06:22:30 2012] Updating aperture counts using extracted products [Wed Sep 5 06:22:30 2012] Error reading totcts from fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src1_src.pi.gz [Wed Sep 5 06:22:31 2012] No arf file for this source, not re-computing flux [Wed Sep 5 06:22:35 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Wed Sep 5 06:22:36 2012] xmm0112930101/analysis//spectral/fullrun_pn_xmm0112930101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete