[Wed Sep  5 00:05:54 2012] Detection parameters:
  Position = (343.2, 362.2) = 9 6 22.58 -52 0 55.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 100.2 +/- 15.7
  Background counts = 76.2
  Rate = 0.005 +/- 0.0008

[Wed Sep  5 00:05:55 2012] Off-axis axis estimate = 5.65'
[Wed Sep  5 01:56:03 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 01:56:03 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Wed Sep  5 01:56:03 2012] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.616
[Wed Sep  5 01:56:03 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.25"
[Wed Sep  5 02:45:01 2012] fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_src6.ximg exists
[Wed Sep  5 02:45:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_src6.csv
[Wed Sep  5 02:45:01 2012] fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_src6_1.ximg exists
[Wed Sep  5 02:45:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_src6.csv
[Wed Sep  5 02:45:01 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 02:45:02 2012] fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Wed Sep  5 02:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Sep  5 02:45:02 2012] fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Wed Sep  5 02:45:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src6.csv
[Wed Sep  5 02:45:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 02:45:15 2012] Spatial fit model total counts = 779.296000, observed total counts = 639.000000
[Wed Sep  5 02:45:15 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 02:45:15 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 02:45:15 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 02:45:15 2012] Assessing source extent using major
[Wed Sep  5 02:45:15 2012] Source does appear to be extended
[Wed Sep  5 02:45:15 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 02:45:15 2012] Source is confused with source 6
[Wed Sep  5 02:45:15 2012] Source is confused with source 5
[Wed Sep  5 04:52:11 2012] Using EEF radius (= 9.25 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 04:52:11 2012] Initial guess for spatial extent in simple fitting = 9.25"
[Wed Sep  5 04:52:11 2012] source mask rpix=2.1, npix_max = 27, mask sum = 17, frac = 0.616
[Wed Sep  5 04:52:11 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.25"
[Wed Sep  5 05:47:54 2012] fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_src6.ximg exists
[Wed Sep  5 05:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_src6.csv
[Wed Sep  5 05:47:54 2012] fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Sep  5 05:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_src6.csv
[Wed Sep  5 05:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:47:54 2012] fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Sep  5 05:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Sep  5 05:47:54 2012] fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Sep  5 05:47:54 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Sep  5 05:47:54 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:48:06 2012] Warning: source 6 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 12.740112 pixels away
[Wed Sep  5 05:48:06 2012] Spatial fit model total counts = 787.625000, observed total counts = 768.000000
[Wed Sep  5 05:48:06 2012] Offset between fit and detection position for source 7 = 3.054635 pixels
[Wed Sep  5 05:48:06 2012] Warning, changing simple spatial fit ID from 6 to 14
[Wed Sep  5 05:48:06 2012] 739.227400 total counts/ 94.512400 bgd. counts: snr = 66.316772
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 3.054635 pixels
  Position = (343.0, 365.2) = 9 6 22.69 -52 0 40.2
  Extent = 27.9 (20.3-55.8)" x 25.9 (21.8-27.9)", rotation angle = 11
  Source counts = 644.7 +/- 27.2
  Background counts = 94.5
  Rate = 0.02 +/- 0.0009
[Wed Sep  5 05:48:06 2012] Spatial fit model total counts = 1640.770000, observed total counts = 1420.000000
[Wed Sep  5 05:48:06 2012] Poor agreement between spatial fit and data for source 7
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 05:48:06 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 05:48:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 05:48:06 2012] Assessing source extent using major axis lower bound
[Wed Sep  5 05:48:06 2012] Source does appear to be extended
[Wed Sep  5 05:48:06 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.73
[Wed Sep  5 06:14:51 2012] XMMSAS src. selection expression = ellipse(29789.588000, 31727.455600, 1674.168048, 1552.200045, 10.512000, X, Y)
[Wed Sep  5 06:14:51 2012] Writing source region out to fullrun_mos2_xmm0112930101_pi300-10000_pass1_cl_src7_src.reg
[Wed Sep  5 06:14:51 2012] Extracting stamp from image fullrun_mos2_xmm0112930101_pi300-10000_cl_sm2.00.img.gz, (247, 269) - (439, 461)
[Wed Sep  5 06:14:51 2012] XMMSAS bgd. selection expression = annulus(29789.588000, 31727.455600, 2790.280080, 5580.560161, X, Y) && !ellipse(34607.151367, 27168.130981, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32057.728516, 26575.549683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31572.851135, 25753.921661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31231.568800, 31058.530200, 897.664026, 897.664026, 0.000000, X, Y) && !ellipse(32044.776000, 26990.182000, 1468.600042, 1468.600042, 0.000000, X, Y) && !ellipse(31884.872000, 30398.592000, 1519.600044, 1519.600044, 0.000000, X, Y) && !ellipse(30370.452087, 31445.322113, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27934.462708, 32898.637360, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31429.397247, 26111.665619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28539.332400, 30557.539200, 1301.768037, 1301.768037, 0.000000, X, Y) && !ellipse(32314.257446, 27534.830353, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30071.904000, 31832.716000, 1501.976043, 1501.976043, 0.000000, X, Y) && !ellipse(30817.195282, 37030.978058, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep  5 06:14:51 2012] Writing fullrun_mos2_xmm0112930101_pi300-10000_pass1_cl_src7.gif
[Wed Sep  5 06:15:58 2012] Mean detx,y = (6966.34, -5270.48) 
[Wed Sep  5 06:15:58 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 06:16:33 2012] grppha failed
[Wed Sep  5 06:16:33 2012] Setting source spectrum file to fullrun_mos2_xmm0112930101_pi300-10000_pass1_cl_src7_src.pi.gz
[Wed Sep  5 06:16:33 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0112930101_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Wed Sep  5 06:22:31 2012] Updating aperture counts using extracted products
[Wed Sep  5 06:22:31 2012] Error reading totcts from fullrun_mos2_xmm0112930101_pi300-10000_pass1_cl_src7_src.pi.gz
[Wed Sep  5 06:22:32 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 06:22:34 2012] Flag p found in src. 7 procflags, skipping spectral fitting
[Wed Sep  5 06:22:34 2012] Flag c found in src. 7 procflags, skipping spectral fitting
[Wed Sep  5 06:22:34 2012] Source 7 has no response, skipping
[Wed Sep  5 06:22:35 2012] xmm0112930101/analysis//spectral/fullrun_mos2_xmm0112930101_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete