[Wed Sep  5 00:05:38 2012] Detection parameters:
  Position = (364.9, 281.1) = 9 6 12.26 -52 6 46.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 126.8 +/- 18.8
  Background counts = 79.8
  Rate = 0.005 +/- 0.0007

[Wed Sep  5 00:05:38 2012] Off-axis axis estimate = 4.98'
[Wed Sep  5 01:24:29 2012] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 01:24:29 2012] Initial guess for spatial extent in simple fitting = 8.92"
[Wed Sep  5 01:24:29 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.961
[Wed Sep  5 01:24:29 2012] Giving source the simple spatial ID 8 for pass 0, mean size = 8.92"
[Wed Sep  5 01:56:02 2012] fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_src8.ximg exists
[Wed Sep  5 01:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_src8.csv
[Wed Sep  5 01:56:02 2012] fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_src8_1.ximg exists
[Wed Sep  5 01:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_src8.csv
[Wed Sep  5 01:56:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 01:56:02 2012] fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Wed Sep  5 01:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Sep  5 01:56:02 2012] fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Wed Sep  5 01:56:02 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src8.csv
[Wed Sep  5 01:56:02 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112930101_pi300-10000_cl_pass0_tfrozen_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 02:45:11 2012] Spatial fit model total counts = 948.884000, observed total counts = 857.000000
[Wed Sep  5 02:45:11 2012] Poor agreement between spatial fit and data for source 16
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Sep  5 02:45:11 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 02:45:11 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 02:45:11 2012] Assessing source extent using major
[Wed Sep  5 02:45:11 2012] Source does appear to be extended
[Wed Sep  5 02:45:11 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 04:19:30 2012] Using EEF radius (= 8.92 ")to estimate initial spatial extent for simple fitting
[Wed Sep  5 04:19:30 2012] Initial guess for spatial extent in simple fitting = 8.92"
[Wed Sep  5 04:19:30 2012] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.961
[Wed Sep  5 04:19:30 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 8.92"
[Wed Sep  5 04:52:11 2012] fullrun_mos1_xmm0112930101_pi300-10000_cl_pass1_src7.ximg exists
[Wed Sep  5 04:52:11 2012] fullrun_mos1_xmm0112930101_pi300-10000_cl_pass1_src7_1.ximg exists
[Wed Sep  5 04:52:11 2012] Fit fullrun_mos1_xmm0112930101_pi300-10000_cl_pass1_src7 appears to have run properly
[Wed Sep  5 04:52:11 2012] fullrun_mos1_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Wed Sep  5 04:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Sep  5 04:52:11 2012] fullrun_mos1_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Wed Sep  5 04:52:11 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7.csv
[Wed Sep  5 04:52:11 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0112930101_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Sep  5 05:48:03 2012] Spatial fit model total counts = 907.264000, observed total counts = 857.000000
[Wed Sep  5 05:48:03 2012] Offset between fit and detection position for source 16 = 4.803182 pixels
[Wed Sep  5 05:48:03 2012] 897.660000 total counts/ 63.303000 bgd. counts: snr = 104.867223
Spatial fit parameters:
  Offset between fit and detection position for source 16 = 4.803182 pixels
  Position = (361.4, 284.4) = 9 6 13.93 -52 6 31.9
  Extent = 37.9" x 37.9", rotation angle = 287
  Source counts = 834.4 +/- 30.0
  Background counts = 63.3
  Rate = 0.03 +/- 0.001
[Wed Sep  5 05:48:03 2012] Vigneting correction estimate = 1.000000
[Wed Sep  5 05:48:03 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Sep  5 05:48:03 2012] Assessing source extent using major
[Wed Sep  5 05:48:03 2012] Source does appear to be extended
[Wed Sep  5 05:48:03 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Sep  5 05:48:03 2012] Source is confused with source 11
[Wed Sep  5 05:48:03 2012] Source is confused with source 14
[Wed Sep  5 05:48:03 2012] Source is confused with source 15
[Wed Sep  5 06:08:11 2012] XMMSAS src. selection expression = ellipse(31395.896000, 24691.318000, 2272.968065, 2272.968065, 286.851000, X, Y)
[Wed Sep  5 06:08:11 2012] Writing source region out to fullrun_mos1_xmm0112930101_pi300-10000_pass1_cl_src16_src.reg
[Wed Sep  5 06:08:11 2012] Extracting stamp from image fullrun_mos1_xmm0112930101_pi300-10000_cl_sm2.00.img.gz, (231, 154) - (492, 415)
[Wed Sep  5 06:08:11 2012] XMMSAS bgd. selection expression = annulus(31395.896000, 24691.318000, 3788.280109, 7576.560218, X, Y) && !ellipse(34624.942719, 27121.280334, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31737.602000, 25862.236000, 1427.200041, 1427.200041, 0.000000, X, Y) && !ellipse(31658.860809, 25114.930450, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31163.272400, 31129.375600, 540.384016, 540.384016, 0.000000, X, Y) && !ellipse(32641.033142, 25109.070801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31877.837006, 27126.654114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32086.856400, 29780.790000, 1515.312044, 1515.312044, 0.000000, X, Y) && !ellipse(32318.096619, 20267.966049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31655.645569, 21012.148193, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31931.601349, 20595.594009, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30064.906006, 31665.952393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32708.693909, 21030.994919, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Sep  5 06:08:11 2012] Writing fullrun_mos1_xmm0112930101_pi300-10000_pass1_cl_src16.gif
[Wed Sep  5 06:09:46 2012] Mean detx,y = (1817.01, -5815.05) 
[Wed Sep  5 06:09:47 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Sep  5 06:10:46 2012] grppha failed
[Wed Sep  5 06:10:46 2012] Setting source spectrum file to fullrun_mos1_xmm0112930101_pi300-10000_pass1_cl_src16_src.pi.gz
[Wed Sep  5 06:10:46 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0112930101_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Wed Sep  5 06:22:31 2012] Updating aperture counts using extracted products
[Wed Sep  5 06:22:31 2012] Error reading totcts from fullrun_mos1_xmm0112930101_pi300-10000_pass1_cl_src16_src.pi.gz
[Wed Sep  5 06:22:31 2012] No arf file for this source, not re-computing flux
[Wed Sep  5 06:22:33 2012] Flag p found in src. 16 procflags, skipping spectral fitting
[Wed Sep  5 06:22:33 2012] Flag c found in src. 16 procflags, skipping spectral fitting
[Wed Sep  5 06:22:33 2012] Source 16 has no response, skipping
[Wed Sep  5 06:22:34 2012] xmm0112930101/analysis//spectral/fullrun_mos1_xmm0112930101_pi300-10000_pass1_cl_src16_pl.csv not found, spectral fit skipped or did not complete