[Thu May 16 22:48:59 2013] Detection parameters:
  Position = (315.9, 312.0) = 22 53 59.41 -17 33 52.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 27.5 +/- 7.5
  Background counts = 4.7
  Rate = 0.005 +/- 0.001

[Thu May 16 22:48:59 2013] Off-axis axis estimate = 1.60'
[Thu May 16 22:58:57 2013] Using EEF radius (= 7.23 ")to estimate initial spatial extent for simple fitting
[Thu May 16 22:58:57 2013] Initial guess for spatial extent in simple fitting = 7.23"
[Thu May 16 22:58:57 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.856
[Thu May 16 22:58:57 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.23"
[Thu May 16 23:22:04 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_src5.ximg exists
[Thu May 16 23:22:04 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_src5_1.ximg exists
[Thu May 16 23:22:04 2013] Fit fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_src5 appears to have run properly
[Thu May 16 23:22:04 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Thu May 16 23:22:04 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Thu May 16 23:22:04 2013] Fit fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Thu May 16 23:22:07 2013] Spatial fit model total counts = 187.858000, observed total counts = 185.000000
[Thu May 16 23:22:07 2013] Offset between fit and detection position for source 6 = 7.124452 pixels
[Thu May 16 23:22:07 2013] 162.370100 total counts/ 113.248000 bgd. counts: snr = 4.615956
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 7.124452 pixels
  Position = (320.9, 317.1) = 22 53 57.89 -17 33 31.0
  Extent = 14.5 (14.4-28.9)", rotation angle = 0
  Source counts = 49.1 +/- 12.7
  Background counts = 113.2
  Rate = 0.009 +/- 0.002
[Thu May 16 23:22:07 2013] Vigneting correction estimate = 1.000000
[Thu May 16 23:22:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 23:22:07 2013] Assessing source extent using major axis lower bound
[Thu May 16 23:22:07 2013] Source does appear to be extended
[Thu May 16 23:22:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 23:32:03 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu May 16 23:32:03 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Thu May 16 23:32:03 2013] Initial guess for spatial extent in simple fitting = 14.46"
[Thu May 16 23:32:03 2013] source mask rpix=3.3, npix_max = 58, mask sum = 63, frac = 1.077
[Thu May 16 23:32:03 2013] Giving source the simple spatial ID 5 for pass 1, mean size = 14.46"
[Thu May 16 23:55:07 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src5.ximg exists
[Thu May 16 23:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src5.csv
[Thu May 16 23:55:07 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src5_1.ximg exists
[Thu May 16 23:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src5.csv
[Thu May 16 23:55:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:55:08 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Thu May 16 23:55:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 16 23:55:08 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Thu May 16 23:55:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src5.csv
[Thu May 16 23:55:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:55:11 2013] Warning, spatial fit 5 centroid is now closest to src. 7
[Thu May 16 23:55:11 2013] Vigneting correction estimate = 1.000000
[Thu May 16 23:55:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 23:55:11 2013] Assessing source extent using major axis lower bound
[Thu May 16 23:55:11 2013] Source does appear to be extended
[Thu May 16 23:55:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 00:00:36 2013] XMMSAS src. selection expression = ellipse(27867.480000, 27535.214000, 867.456025, 867.456025, 0.000000, X, Y)
[Fri May 17 00:00:36 2013] Writing source region out to fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src6_src.reg
[Fri May 17 00:00:36 2013] Extracting stamp from image fullrun_mos2_xmm0112910301_pi300-10000_cl_sm2.00.img.gz, (271, 267) - (371, 367)
[Fri May 17 00:00:36 2013] XMMSAS bgd. selection expression = annulus(27867.480000, 27535.214000, 1445.760042, 2891.520083, X, Y) && !ellipse(26510.493500, 26584.385620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27096.230133, 26287.263947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26898.241943, 27264.843079, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May 17 00:00:36 2013] Writing fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src6.gif
[Fri May 17 00:01:24 2013] Mean detx,y = (106.48, 398.04) 
[Fri May 17 00:01:25 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 00:01:42 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 00:01:42 2013] Setting source spectrum file to fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Fri May 17 00:01:42 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Fri May 17 00:03:13 2013] Not generating rmf since there are only 49 counts
[Fri May 17 00:03:13 2013] rmf not generated due to insufficient counts
[Fri May 17 00:04:38 2013] Updating aperture counts using extracted products
[Fri May 17 00:04:38 2013] Total counts from fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 98.00
[Fri May 17 00:04:38 2013] Total counts from fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src6_bgd.pi.gz = 14.00
[Fri May 17 00:04:38 2013] Got source and background scale factors 1839430.000000, 0.000000
[Fri May 17 00:04:38 2013] Background scale factor is not positive, halting re-assessment of this source
[Fri May 17 00:04:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 00:04:38 2013] Using photon index=1.80, rate=0.00919, arf fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src6.arf
[Fri May 17 00:04:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 00:04:38 2013] Updating source flux to 8.8e-14
[Fri May 17 00:04:40 2013] Source 6 has fewer than 100.000000 counts, skipping spectral fitting
[Fri May 17 00:04:41 2013] xmm0112910301/analysis//spectral/fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete