[Thu May 16 22:48:59 2013] Detection parameters:
  Position = (309.7, 313.9) = 22 54 1.27 -17 33 41.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 22.6 +/- 6.6
  Background counts = 4.5
  Rate = 0.005 +/- 0.001

[Thu May 16 22:48:59 2013] Off-axis axis estimate = 1.39'
[Thu May 16 22:58:57 2013] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Thu May 16 22:58:57 2013] Initial guess for spatial extent in simple fitting = 7.12"
[Thu May 16 22:58:57 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Thu May 16 22:58:57 2013] Giving source the simple spatial ID 7 for pass 0, mean size = 7.12"
[Thu May 16 23:22:04 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_src7.ximg exists
[Thu May 16 23:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_src7.csv
[Thu May 16 23:22:04 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_src7_1.ximg exists
[Thu May 16 23:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_src7.csv
[Thu May 16 23:22:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:22:04 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Thu May 16 23:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May 16 23:22:04 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Thu May 16 23:22:04 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_tfrozen_src7.csv
[Thu May 16 23:22:04 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112910301_pi300-10000_cl_pass0_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:22:07 2013] Warning, spatial fit 7 centroid is now closest to src. 1
[Thu May 16 23:22:07 2013] Vigneting correction estimate = 1.000000
[Thu May 16 23:22:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 23:22:07 2013] Assessing source extent using major
[Thu May 16 23:22:07 2013] Source does appear to be extended
[Thu May 16 23:22:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Thu May 16 23:32:03 2013] Using EEF radius (= 7.12 ")to estimate initial spatial extent for simple fitting
[Thu May 16 23:32:03 2013] Initial guess for spatial extent in simple fitting = 7.12"
[Thu May 16 23:32:03 2013] source mask rpix=1.6, npix_max = 18, mask sum = 16, frac = 0.875
[Thu May 16 23:32:03 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.12"
[Thu May 16 23:55:07 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src7.ximg exists
[Thu May 16 23:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src7.csv
[Thu May 16 23:55:07 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu May 16 23:55:07 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src7.csv
[Thu May 16 23:55:07 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:55:08 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu May 16 23:55:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May 16 23:55:08 2013] fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu May 16 23:55:08 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src7.csv
[Thu May 16 23:55:08 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112910301_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu May 16 23:55:11 2013] Source 5 is offset by -4.003771 and -4.704539 pixels which is larger than
2 X fitted extent = 4.386552 x 1.805375, not incorporating fit results
[Thu May 16 23:55:11 2013] Vigneting correction estimate = 1.000000
[Thu May 16 23:55:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu May 16 23:55:11 2013] Assessing source extent using major
[Thu May 16 23:55:11 2013] Source does appear to be extended
[Thu May 16 23:55:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 17 00:00:36 2013] XMMSAS src. selection expression = ellipse(26898.241943, 27264.843079, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May 17 00:00:36 2013] Writing source region out to fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src5_src.reg
[Fri May 17 00:00:36 2013] Extracting stamp from image fullrun_mos2_xmm0112910301_pi300-10000_cl_sm2.00.img.gz, (272, 276) - (347, 351)
[Fri May 17 00:00:36 2013] XMMSAS bgd. selection expression = annulus(26898.241943, 27264.843079, 1087.500000, 2175.000000, X, Y) && !ellipse(26510.493500, 26584.385620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27096.230133, 26287.263947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27867.480000, 27535.214000, 1156.608033, 1156.608033, 0.000000, X, Y)
[Fri May 17 00:00:36 2013] Writing fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src5.gif
[Fri May 17 00:02:03 2013] Mean detx,y = (669.00, -201.88) 
[Fri May 17 00:02:04 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May 17 00:02:20 2013] Binned source spectrum to 10 counts/bin
[Fri May 17 00:02:20 2013] Setting source spectrum file to fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Fri May 17 00:02:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Fri May 17 00:04:07 2013] Not generating rmf since there are only 22 counts
[Fri May 17 00:04:07 2013] rmf not generated due to insufficient counts
[Fri May 17 00:04:38 2013] Updating aperture counts using extracted products
[Fri May 17 00:04:38 2013] Total counts from fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 153.00
[Fri May 17 00:04:38 2013] Total counts from fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src5_bgd.pi.gz = 30.00
[Fri May 17 00:04:38 2013] Got source and background scale factors 1145992.000000, 64424.000000
[Fri May 17 00:04:38 2013] User source parameters:
  Position = (309.7, 313.9) = 22 54 1.27 -17 33 41.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -380.6 +/- 13.4
  Background aperture counts = 533.6
  Rate = -0.07 +/- 0.003

[Fri May 17 00:04:38 2013] Updating counts from extracted products
[Fri May 17 00:04:38 2013] Set source signif. to -380.65/23.10 = -16.48
[Fri May 17 00:04:38 2013] Calculating source flux in energy range 0.30-8.00
[Fri May 17 00:04:38 2013] Using photon index=1.80, rate=-0.0712, arf fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src5.arf
[Fri May 17 00:04:38 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May 17 00:04:38 2013] Updated flux is not positive, keeping original flux
[Fri May 17 00:04:40 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May 17 00:04:41 2013] xmm0112910301/analysis//spectral/fullrun_mos2_xmm0112910301_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete