[Sat Nov 26 01:44:12 2011] Detection parameters:
  Position = (214.0, 324.3) = 15 4 25.21 10 29 38.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 207.7 +/- 18.1
  Background counts = 3.7
  Rate = 0.02 +/- 0.002

[Sat Nov 26 01:44:12 2011] Off-axis axis estimate = 6.40'
[Sat Nov 26 02:32:42 2011] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 02:32:42 2011] Initial guess for spatial extent in simple fitting = 9.63"
[Sat Nov 26 02:32:42 2011] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.713
[Sat Nov 26 02:32:42 2011] Giving source the simple spatial ID 2 for pass 0, mean size = 9.63"
[Sat Nov 26 03:10:25 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src2.ximg exists
[Sat Nov 26 03:10:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src2.csv
[Sat Nov 26 03:10:25 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sat Nov 26 03:10:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src2.csv
[Sat Nov 26 03:10:25 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 03:10:25 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sat Nov 26 03:10:25 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sat Nov 26 03:10:25 2011] Fit fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sat Nov 26 03:10:35 2011] Warning, spatial fit 2 centroid is now closest to src. 10
[Sat Nov 26 03:10:35 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 03:10:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 03:10:35 2011] Assessing source extent using major
[Sat Nov 26 03:10:35 2011] Source does appear to be extended
[Sat Nov 26 03:10:35 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 03:36:34 2011] Using EEF radius (= 9.63 ")to estimate initial spatial extent for simple fitting
[Sat Nov 26 03:36:34 2011] Initial guess for spatial extent in simple fitting = 9.63"
[Sat Nov 26 03:36:34 2011] source mask rpix=2.2, npix_max = 29, mask sum = 21, frac = 0.713
[Sat Nov 26 03:36:34 2011] Giving source the simple spatial ID 2 for pass 1, mean size = 9.63"
[Sat Nov 26 04:01:39 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src2.ximg exists
[Sat Nov 26 04:01:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src2.csv
[Sat Nov 26 04:01:39 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sat Nov 26 04:01:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src2.csv
[Sat Nov 26 04:01:39 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Nov 26 04:01:39 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sat Nov 26 04:01:39 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sat Nov 26 04:01:39 2011] Fit fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Sat Nov 26 04:01:46 2011] Spatial fit model total counts = 209.661000, observed total counts = 210.000000
[Sat Nov 26 04:01:46 2011] Offset between fit and detection position for source 9 = 1.358453 pixels
[Sat Nov 26 04:01:46 2011] 213.155000 total counts/ 66.429000 bgd. counts: snr = 18.002309
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 1.358453 pixels
  Position = (213.2, 323.2) = 15 4 25.44 10 29 44.3
  Extent = 5.4 (4.8-6.2)", rotation angle = 0
  Source counts = 146.7 +/- 14.6
  Background counts = 66.4
  Rate = 0.02 +/- 0.002
[Sat Nov 26 04:01:46 2011] Vigneting correction estimate = 1.000000
[Sat Nov 26 04:01:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Nov 26 04:01:46 2011] Assessing source extent using major axis lower bound
[Sat Nov 26 04:01:46 2011] Source does appear to be extended
[Sat Nov 26 04:01:46 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Nov 26 04:21:46 2011] XMMSAS src. selection expression = ellipse(18502.137400, 28066.343000, 326.212242, 326.212242, 0.000000, X, Y)
[Sat Nov 26 04:21:46 2011] Writing source region out to fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src9_src.reg
[Sat Nov 26 04:21:46 2011] Extracting stamp from image fullrun_mos2_xmm0112910201_pi300-10000_cl_sm2.00.img.gz, (194, 304) - (232, 342)
[Sat Nov 26 04:21:46 2011] XMMSAS bgd. selection expression = annulus(18502.137400, 28066.343000, 543.687070, 1087.374140, X, Y)
[Sat Nov 26 04:21:46 2011] Writing fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src9.gif
[Sat Nov 26 04:25:10 2011] Mean detx,y = (-4421.11, -6931.80) 
[Sat Nov 26 04:25:12 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Nov 26 04:25:28 2011] Binned source spectrum to 10 counts/bin
[Sat Nov 26 04:25:28 2011] Setting source spectrum file to fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Nov 26 04:25:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Nov 26 04:39:09 2011] Updating aperture counts using extracted products
[Sat Nov 26 04:39:09 2011] Error reading totcts from fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Nov 26 04:39:09 2011] Calculating source flux in energy range 0.30-8.00
[Sat Nov 26 04:39:09 2011] Using photon index=1.80, rate=0.0169, arf fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src9.arf
[Sat Nov 26 04:39:09 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Nov 26 04:39:10 2011] Updating source flux to 4e-13