[Sat Nov 26 01:44:12 2011] Detection parameters: Position = (295.0, 275.1) = 15 4 1.31 10 26 15.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 37316.0 +/- 227.4 Background counts = 3.6 Rate = 5 +/- 0.03 [Sat Nov 26 01:44:12 2011] Off-axis axis estimate = 1.71' [Sat Nov 26 02:32:42 2011] Using EEF radius (= 7.28 ")to estimate initial spatial extent for simple fitting [Sat Nov 26 02:32:42 2011] Initial guess for spatial extent in simple fitting = 7.28" [Sat Nov 26 02:32:42 2011] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.846 [Sat Nov 26 02:32:42 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 7.28" [Sat Nov 26 03:10:25 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src1.ximg exists [Sat Nov 26 03:10:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src1.csv [Sat Nov 26 03:10:25 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src1_1.ximg exists [Sat Nov 26 03:10:25 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src1.csv [Sat Nov 26 03:10:25 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Nov 26 03:10:25 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists [Sat Nov 26 03:10:25 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists [Sat Nov 26 03:10:25 2011] Fit fullrun_mos2_xmm0112910201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly [Sat Nov 26 03:10:35 2011] Spatial fit model total counts = 32807.700000, observed total counts = 32740.000000 [Sat Nov 26 03:10:35 2011] Offset between fit and detection position for source 1 = 0.065312 pixels [Sat Nov 26 03:10:35 2011] 32975.130000 total counts/ 6403.130000 bgd. counts: snr = 332.068809 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.065312 pixels Position = (295.0, 275.1) = 15 4 1.32 10 26 15.5 Extent = 5.5 (5.5-5.6)", rotation angle = 0 Source counts = 26572.0 +/- 181.6 Background counts = 6403.1 Rate = 3 +/- 0.02 [Sat Nov 26 03:10:35 2011] Vigneting correction estimate = 1.000000 [Sat Nov 26 03:10:35 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Nov 26 03:10:35 2011] Assessing source extent using major axis lower bound [Sat Nov 26 03:10:35 2011] Source does appear to be extended [Sat Nov 26 03:10:35 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Nov 26 03:36:34 2011] Using previous fit value to estimate initial spatial extent for simple fitting [Sat Nov 26 03:36:34 2011] Initial guess for spatial extent in simple fitting = 5.55" [Sat Nov 26 03:36:34 2011] source mask rpix=1.3, npix_max = 12, mask sum = 16, frac = 1.269 [Sat Nov 26 03:36:34 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 5.55" [Sat Nov 26 04:01:39 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src1.ximg exists [Sat Nov 26 04:01:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src1.csv [Sat Nov 26 04:01:39 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src1_1.ximg exists [Sat Nov 26 04:01:39 2011] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src1.csv [Sat Nov 26 04:01:39 2011] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src1_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sat Nov 26 04:01:39 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists [Sat Nov 26 04:01:39 2011] fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists [Sat Nov 26 04:01:39 2011] Fit fullrun_mos2_xmm0112910201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly [Sat Nov 26 04:01:46 2011] Spatial fit model total counts = 32807.700000, observed total counts = 32740.000000 [Sat Nov 26 04:01:46 2011] Offset between fit and detection position for source 1 = 0.000000 pixels [Sat Nov 26 04:01:46 2011] 32975.130000 total counts/ 6403.130000 bgd. counts: snr = 332.068809 Spatial fit parameters: Offset between fit and detection position for source 1 = 0.000000 pixels Position = (295.0, 275.1) = 15 4 1.32 10 26 15.5 Extent = 5.5 (5.5-5.6)", rotation angle = 0 Source counts = 26572.0 +/- 181.6 Background counts = 6403.1 Rate = 3 +/- 0.02 [Sat Nov 26 04:01:46 2011] Vigneting correction estimate = 1.000000 [Sat Nov 26 04:01:46 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sat Nov 26 04:01:46 2011] Assessing source extent using major axis lower bound [Sat Nov 26 04:01:46 2011] Source does appear to be extended [Sat Nov 26 04:01:46 2011] Computing asymmetry using major and minor axis, asym = 1.00 [Sat Nov 26 04:21:46 2011] Counts = 26572.000000, rescaling region sizes by 3.000000 [Sat Nov 26 04:21:46 2011] XMMSAS src. selection expression = ellipse(25618.963440, 23888.739400, 998.679629, 998.679629, 0.000000, X, Y) [Sat Nov 26 04:21:46 2011] Writing source region out to fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src1_src.reg [Sat Nov 26 04:21:46 2011] Extracting stamp from image fullrun_mos2_xmm0112910201_pi300-10000_cl_sm2.00.img.gz, (238, 218) - (352, 333) [Sat Nov 26 04:21:46 2011] XMMSAS bgd. selection expression = annulus(25618.963440, 23888.739400, 4993.398144, 9986.796287, X, Y) && !ellipse(18502.137400, 28066.343000, 434.949656, 434.949656, 0.000000, X, Y) && !ellipse(24660.912476, 23695.294250, 870.000000, 870.000000, 0.000000, X, Y) [Sat Nov 26 04:21:46 2011] Writing fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src1.gif [Sat Nov 26 04:21:52 2011] Mean detx,y = (9.42, 35.76) [Sat Nov 26 04:21:55 2011] Setting backscal keywords in source and bgd. spectrum [Sat Nov 26 04:25:05 2011] Binned source spectrum to 10 counts/bin [Sat Nov 26 04:25:05 2011] Setting source spectrum file to fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Nov 26 04:25:05 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src1_bgd.pi.gz [Sat Nov 26 04:39:09 2011] Updating aperture counts using extracted products [Sat Nov 26 04:39:09 2011] Error reading totcts from fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src1_src_b10.pi.gz [Sat Nov 26 04:39:09 2011] Calculating source flux in energy range 0.30-8.00 [Sat Nov 26 04:39:09 2011] Using photon index=1.80, rate=3.06, arf fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src1.arf [Sat Nov 26 04:39:09 2011] Assuming count rate is from the 0.30-10.00 bandpass [Sat Nov 26 04:39:09 2011] Updating source flux to 3e-11 [Sat Nov 26 04:39:54 2011] Reading fit data from xmm0112910201/analysis//spectral/fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src1_pl.csv [Sat Nov 26 04:39:54 2011] Spectral fit parameter nH value = 7.49243e+12 [Sat Nov 26 04:39:54 2011] Spectral fit parameter PhoIndex value = 2.28172 [Sat Nov 26 04:39:54 2011] Failed to get F(0.3-8.0) from xmm0112910201/analysis//spectral/fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected [Sat Nov 26 04:39:54 2011] Calculating source flux in energy range 0.30-8.00 [Sat Nov 26 04:39:54 2011] Using Nh = 7.5e+12, photon index=2.28, rate=3.06, arf fullrun_mos2_xmm0112910201_pi300-10000_pass1_cl_src1.arf [Sat Nov 26 04:39:54 2011] Assuming count rate is from the 0.30-10.00 bandpass [Sat Nov 26 04:39:54 2011] Updating source flux to 2.5e-11