[Fri May 3 01:22:29 2013] Detection parameters: Position = (217.9, 179.0) = 0 54 58.84 -74 48 19.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 332.5 +/- 25.2 Background counts = 37.2 Rate = 0.009 +/- 0.0007 [Fri May 3 01:22:30 2013] Off-axis axis estimate = 10.44' [Fri May 3 01:25:27 2013] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting [Fri May 3 01:25:27 2013] Initial guess for spatial extent in simple fitting = 11.65" [Fri May 3 01:25:27 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891 [Fri May 3 01:25:27 2013] Giving source the simple spatial ID 6 for pass 0, mean size = 11.65" [Fri May 3 04:01:21 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src6.ximg exists [Fri May 3 04:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src6.csv [Fri May 3 04:01:21 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src6_1.ximg exists [Fri May 3 04:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src6.csv [Fri May 3 04:01:21 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 04:01:22 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_tfrozen_src6.ximg exists [Fri May 3 04:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_tfrozen_src6.csv [Fri May 3 04:01:22 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists [Fri May 3 04:01:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_tfrozen_src6.csv [Fri May 3 04:01:22 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_tfrozen_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 05:34:21 2013] Source 7 is offset by -2.275275 and -2.503354 pixels which is larger than 2 X fitted extent = 10.712460 x 2.430800, not incorporating fit results [Fri May 3 05:34:22 2013] Vigneting correction estimate = 1.000000 [Fri May 3 05:34:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 05:34:22 2013] Assessing source extent using major [Fri May 3 05:34:22 2013] Source does appear to be extended [Fri May 3 05:34:22 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 05:34:22 2013] Source is confused with source 10 [Fri May 3 05:34:22 2013] Source is confused with source 11 [Fri May 3 05:34:41 2013] Using EEF radius (= 11.65 ")to estimate initial spatial extent for simple fitting [Fri May 3 05:34:41 2013] Initial guess for spatial extent in simple fitting = 11.65" [Fri May 3 05:34:41 2013] source mask rpix=2.7, npix_max = 40, mask sum = 36, frac = 0.891 [Fri May 3 05:34:41 2013] Giving source the simple spatial ID 6 for pass 1, mean size = 11.65" [Fri May 3 07:39:39 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src6.ximg exists [Fri May 3 07:39:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src6.csv [Fri May 3 07:39:39 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src6_1.ximg exists [Fri May 3 07:39:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src6.csv [Fri May 3 07:39:39 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src6_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri May 3 07:39:40 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_tfrozen_src6.ximg exists [Fri May 3 07:39:40 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists [Fri May 3 07:39:40 2013] Fit fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly [Fri May 3 08:14:00 2013] Source 7 is offset by -2.221184 and -2.426023 pixels which is larger than 2 X fitted extent = 10.712460 x 2.377885, not incorporating fit results [Fri May 3 08:14:00 2013] Vigneting correction estimate = 1.000000 [Fri May 3 08:14:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Fri May 3 08:14:00 2013] Assessing source extent using major [Fri May 3 08:14:00 2013] Source does appear to be extended [Fri May 3 08:14:00 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Fri May 3 08:14:12 2013] XMMSAS src. selection expression = ellipse(18912.093033, 15524.295563, 652.500000, 652.500000, 0.000000, X, Y) [Fri May 3 08:14:12 2013] Writing source region out to fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src7_src.reg [Fri May 3 08:14:12 2013] Extracting stamp from image fullrun_pn_xmm0112880901_pi300-10000_cl_sm2.00.img.gz, (180, 141) - (255, 216) [Fri May 3 08:14:12 2013] XMMSAS bgd. selection expression = annulus(18912.093033, 15524.295563, 1087.500000, 2175.000000, X, Y) && !ellipse(20725.769600, 17783.362000, 2052.584059, 402.284812, 308.767900, X, Y) && !ellipse(20412.495000, 17390.713400, 2126.288061, 424.405612, 308.860100, X, Y) && !ellipse(19649.251660, 16430.121000, 2193.560063, 437.359213, 309.009100, X, Y) && !ellipse(19465.221800, 16203.358800, 2229.544064, 437.760813, 128.624000, X, Y) && !ellipse(20864.311200, 17961.724600, 2044.368059, 407.656012, 308.477500, X, Y) && !ellipse(21770.551200, 19128.963600, 1967.696057, 398.108011, 308.560900, X, Y) [Fri May 3 08:14:12 2013] Writing fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src7.gif [Fri May 3 08:21:32 2013] Mean detx,y = (-98.46, 13897.99) [Fri May 3 08:21:34 2013] Setting backscal keywords in source and bgd. spectrum [Fri May 3 08:21:49 2013] Binned source spectrum to 10 counts/bin [Fri May 3 08:21:49 2013] Setting source spectrum file to fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src7_src_b10.pi.gz [Fri May 3 08:21:49 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src7_bgd.pi.gz [Fri May 3 09:18:05 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Fri May 3 09:18:05 2013] rmf not generated due to insufficient counts [Fri May 3 10:27:56 2013] Updating aperture counts using extracted products [Fri May 3 10:27:56 2013] Total counts from fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 798.00 [Fri May 3 10:27:56 2013] Total counts from fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src7_bgd.pi.gz = 702.00 [Fri May 3 10:27:57 2013] Got source and background scale factors 1235809.000000, 854749.000000 [Fri May 3 10:27:57 2013] User source parameters: Position = (217.9, 179.0) = 0 54 58.84 -74 48 19.7 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = -217.0 +/- 29.3 Background aperture counts = 1015.0 Rate = -0.006 +/- 0.0008 [Fri May 3 10:27:57 2013] Updating counts from extracted products [Fri May 3 10:27:57 2013] Set source signif. to -216.96/31.86 = -6.81 [Fri May 3 10:28:04 2013] Calculating source flux in energy range 0.30-8.00 [Fri May 3 10:28:04 2013] Using photon index=1.80, rate=-0.00585, arf fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src7.arf [Fri May 3 10:28:04 2013] Assuming count rate is from the 0.30-10.00 bandpass [Fri May 3 10:28:04 2013] Updated flux is not positive, keeping original flux [Fri May 3 10:28:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Fri May 3 10:28:21 2013] xmm0112880901/analysis//spectral/fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete