[Fri May  3 01:22:29 2013] Detection parameters:
  Position = (476.3, 412.7) = 0 50 16.45 -74 31 20.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 154.6 +/- 17.4
  Background counts = 28.9
  Rate = 0.004 +/- 0.0005

[Fri May  3 01:22:30 2013] Off-axis axis estimate = 15.33'
[Fri May  3 01:25:27 2013] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Fri May  3 01:25:27 2013] Initial guess for spatial extent in simple fitting = 14.09"
[Fri May  3 01:25:27 2013] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.876
[Fri May  3 01:25:27 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 14.09"
[Fri May  3 04:01:21 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src12.ximg exists
[Fri May  3 04:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src12.csv
[Fri May  3 04:01:21 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri May  3 04:01:21 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src12.csv
[Fri May  3 04:01:21 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 04:01:22 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri May  3 04:01:22 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri May  3 04:01:22 2013] Fit fullrun_pn_xmm0112880901_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Fri May  3 05:34:21 2013] Spatial fit model total counts = 578.439000, observed total counts = 524.000000
[Fri May  3 05:34:21 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 05:34:22 2013] Vigneting correction estimate = 1.000000
[Fri May  3 05:34:22 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 05:34:22 2013] Assessing source extent using major
[Fri May  3 05:34:22 2013] Source does appear to be extended
[Fri May  3 05:34:22 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 05:34:41 2013] Using EEF radius (= 14.09 ")to estimate initial spatial extent for simple fitting
[Fri May  3 05:34:41 2013] Initial guess for spatial extent in simple fitting = 14.09"
[Fri May  3 05:34:41 2013] source mask rpix=3.2, npix_max = 55, mask sum = 49, frac = 0.876
[Fri May  3 05:34:41 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 14.09"
[Fri May  3 07:39:39 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src12.ximg exists
[Fri May  3 07:39:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src12.csv
[Fri May  3 07:39:39 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src12_1.ximg exists
[Fri May  3 07:39:39 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src12.csv
[Fri May  3 07:39:39 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 07:39:40 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Fri May  3 07:39:40 2013] fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Fri May  3 07:39:40 2013] Fit fullrun_pn_xmm0112880901_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Fri May  3 08:14:00 2013] Spatial fit model total counts = 578.243000, observed total counts = 524.000000
[Fri May  3 08:14:00 2013] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 08:14:00 2013] Vigneting correction estimate = 1.000000
[Fri May  3 08:14:00 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 08:14:00 2013] Assessing source extent using major
[Fri May  3 08:14:00 2013] Source does appear to be extended
[Fri May  3 08:14:00 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 08:14:12 2013] XMMSAS src. selection expression = ellipse(41392.192902, 35858.087006, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 08:14:12 2013] Writing source region out to fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src13_src.reg
[Fri May  3 08:14:12 2013] Extracting stamp from image fullrun_pn_xmm0112880901_pi300-10000_cl_sm2.00.img.gz, (439, 375) - (514, 450)
[Fri May  3 08:14:12 2013] XMMSAS bgd. selection expression = annulus(41392.192902, 35858.087006, 1087.500000, 2175.000000, X, Y) && !ellipse(43113.554596, 34932.541138, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 08:14:12 2013] Writing fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src13.gif
[Fri May  3 08:28:46 2013] Mean detx,y = (4914.32, -15907.32) 
[Fri May  3 08:28:49 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 08:29:13 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 08:29:14 2013] Setting source spectrum file to fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Fri May  3 08:29:14 2013] Setting bgd. spectrum file to fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Fri May  3 09:28:28 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 09:28:28 2013] rmf not generated due to insufficient counts
[Fri May  3 10:27:58 2013] Updating aperture counts using extracted products
[Fri May  3 10:27:58 2013] Total counts from fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 302.00
[Fri May  3 10:27:58 2013] Total counts from fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src13_bgd.pi.gz = 688.00
[Fri May  3 10:27:58 2013] Got source and background scale factors 1337600.000000, 3288615.000000
[Fri May  3 10:27:58 2013] User source parameters:
  Position = (476.3, 412.7) = 0 50 16.45 -74 31 20.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 22.2 +/- 18.4
  Background aperture counts = 279.8
  Rate = 0.0006 +/- 0.0005

[Fri May  3 10:27:58 2013] Updating counts from extracted products
[Fri May  3 10:27:58 2013] Set source signif. to 22.17/16.73 = 1.33
[Fri May  3 10:28:04 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 10:28:04 2013] Using photon index=1.80, rate=0.000598, arf fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src13.arf
[Fri May  3 10:28:04 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 10:28:04 2013] Updating source flux to 6.1e-15
[Fri May  3 10:28:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May  3 10:28:21 2013] xmm0112880901/analysis//spectral/fullrun_pn_xmm0112880901_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete